Iron improving bio-char derived from microalgae on removal of tetracycline from aqueous system

Novel magnetic carbonaceous bio-char was hydrothermal prepared from microalgae under different loadings of iron and its structures and surface chemistry were characterized with Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and nitrogen adsorption-desorption isotherm (BET). The morphology of bio-char changed from sheet to particle as iron loading increased and its surface area also increased. When 3.0 g of dried microalgae and 6.0 mmol iron salt ((NH₄)₂SO₄·FeSO₄·6H₂O) were mixed and treated, the obtained bio-char possessing the highest amount of oxygen-containing functional groups resulted in the best adsorption performance on tetracycline (TC). This adsorption process was fitted to Langmuir adsorption isotherm and the maximum adsorption capacity was 95.86 mg/g, which is higher than other bio-char reported. The iron loading contributed to the higher adsorption capacity of bio-char, which may be due to three factors, the high surface area, more hydrogen bonding, and bridging effects of the structural Fe for TC. Our data suggest that bio-char may have more important role in stabilization of pollutants in the environment.     

磷石膏水热法合成硫酸钙晶须

以磷石膏为原料,二水合硫酸钙、硫酸镁、甘油为添加剂,采用水热法合成硫酸钙晶须,考察了料浆含量、反应温度、反应时间、体系pH等因素对晶须的直径和长径比的影响;并采用SEM技术观察硫酸钙晶须的形貌。实验结果表明,当磷石膏含量2.5%（w）、反应温度130 ℃、反应时间4 h、体系pH 4时,制备得到的硫酸钙晶须长径比为56.24,平均直径为0.17 μm。SEM表征结果显示,硫酸钙晶须形貌规整、分散均匀、直径较小,达百纳米级。     

炼油废水污泥脱水工艺条件的优化

采用化学除油降黏—污泥调理—离心脱水工艺处理某炼油厂废水处理系统的混合污泥,并对工艺条件进行优化。实验结果表明,最佳的工艺条件为：化学除油降黏阶段处理体系的pH=4,反应温度35 ℃,H₂O₂加入量 2 g/L,m（H₂O₂）∶ m（Fe²⁺）=4,反应时间 60 min;污泥调理反应阶段的CaO加入量7.0 g/L;离心脱水阶段在分离因数为1 558时脱水5 min。在此条件下,得到的泥饼的含水率为70.0%~75.0%（w）,含油率小于2%（w）,污泥比阻约为3.0×10⁷ s²/g。     

罐底含油泥热解动力学参数计算方法的优选

在化学反应设计中反应动力学是较重要的因素。为得到更合理的污泥热解动力学参数计算方法,利用热重分析仪,在氮气气氛下对罐底含油污泥的热解特性进行研究。根据热重实验数据,分别采用Coats-Redfern法、Kissinger法、FWO法和Popescu法计算污泥热解动力学参数,并获取罐底泥热解制油的主要阶段(第2阶段)的反应活化能E、频率因子A并分析各种方法反应机理。通过对比不同计算方法得到动力学参数及拟合曲线与实验曲线的相关性,确定了最佳罐底含油污泥热解动力学参数计算方法。研究表明,Popescu法得到罐底泥的热解过程符合Jander方程,活化能E为101.43 kJ/mol,与FWO法得到的91.20 kJ/mol相近,且预测曲线与实验曲线有较好的相关性(0.9816),说明Popescu法计算罐底泥热解动力学参数更合适。     

3种短链脂肪酸对活性污泥储存PHA的影响

采用经乙酸钠驯化培养具有一定聚羟基烷酸酯(PHA)储存能力的活性污泥,考察乙酸、丙酸和丁酸3种短链脂肪酸,以及乙酸、丁酸分别与丙酸按1∶1、1∶2、2∶1比例组合成的6种混合酸作为碳源时对活性污泥中PHA的储存和转化的影响。实验结果表明,在3种短链脂肪酸中,以丁酸为碳源得到活性污泥PHA储存量最高,为40.53 mg/g;在混合酸中,乙酸与丙酸按1∶2组合时,系统PHA储存量最高,为773.4 mg/g。混合酸相对于单一的脂肪酸碳源更有利于活性污泥储存PHA。在混合酸总量一定的条件下,随着丙酸比例的增加,乙酸与丙酸混合比丁酸与丙酸混合更有利于微生物的PHA储存。     

香根草人工湿地处理生活污水的试验研究

通过建立香根草人工湿地系统,研究该系统对生活污水的COD、TP、TN的处理效果以及系统的耐污性。在水力停留时间(HRT)为6h的条件下,COD、TP、TN的去除率分别为63.5%、88.3%、72.4%。研究表明,香根草人工湿地系统对城镇生活污水具有较好的净化效果,且系统在该试验条件下耐污性良好。     

Fenton试剂降解PAM催化剂的研究

采用Fenton试剂氧化降解含油废水中的聚丙烯酰胺,研究了H2O2用量、催化剂种类及用量对降解聚丙烯酰胺效果的影响。结果表明,H2O2用量为聚丙烯酰胺的20%为宜;CuCl2具有和FeSO4、Fe(NO3)3、FeCl3相近的催化效果,并且可以作为一种在较高pH值条件下应用的催化剂;在优选条件下该氧化体系可以使聚丙烯酰胺黏度大大降低。     

高职院校计算机应用专业《JSP动态网站设计》课程改革探析

通过分析当前社会需求,结合高职高专院校目前的教学模式,提出计算机应用专业的《JSP动态网站设计》课程的教学改革方案。在基于工作任务的lAPP（导入-分析-实践-项目）教学情境中,开展“课堂实训＋虚拟公司＋校外实训基地”三位一体的实践模式教学,同时,将对工作过程的考核纳入课程的整个考核体系之中,使学生在课程中能够获得真实的职业体验和完善的实践能力。     

An integrated method for removal of harmful cyanobacterial blooms in eutrophic lakes

As the eutrophication of lakes becomes an increasingly widespread phenomenon, cyanobacterial blooms are occurring in many countries. Although some research has been reported, there is currently no good method for bloom removal. We propose here a new two-step integrated approach to resolve this problem. The first step is the inactivation of the cyanobacteria via the addition of H(2)O(2). We found 60 mg/L was the lowest effective dose for a cyanobacterial concentration corresponding to 100 μg/L chlorophyll-a. The second step is the flocculation and sedimentation of the inactivated cyanobacteria. We found the addition of lake sediment clay (2 g/L) plus polymeric ferric sulfate (20 mg/L) effectively deposited them on the lake bottom. Since algaecides and flocculants had been used separately in previous reports, we innovatively combined these two types of reagents to remove blooms from the lake surface and to improve the dissolved oxygen content of lake sediments.