Source, concentration, and distribution of elemental mercury in the atmosphere in Toronto, Canada

Atmospheric gaseous elemental mercury [GEM] at 1.8, 4, and 59 m above ground, in parking lots, and in indoor and outdoor air was measured in Toronto City, Canada from May 2008-July 2009. The average GEM value at 1.8 m was 1.89 ± 0.62 ng m(-3). The GEM values increased with elevation. The average GEM in underground parking lots ranged from 1.37 to 7.86 ng m(-3) and was higher than those observed from the surface parking lots. The GEM in the indoor air ranged from 1.21 to 28.50 ng m(-3), was higher in the laboratories than in the offices, and was much higher than that in the outdoor air. All these indicate that buildings serve as sources of mercury to the urban atmosphere. More studies are needed to estimate the contribution of urban areas to the atmospheric mercury budget and the impact of indoor air on outdoor air quality and human health.     

Exposure to persistent organic pollutants in utero and related maternal characteristics on birth outcomes: a multivariate data analysis approach

Persistent organic pollutants (POPs) have the capacity to pass through the placental barrier and into the fetal blood stream, and pose health risks to fetuses and neonates who are believed to be more vulnerable to the effects of environmental pollutants. In this study, the prevalence of POPs, including organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs), were determined in 41 cord blood samples collected during the year 2006 in Singapore. The effects of these xenobiotics and the maternal characteristics on fetal growth and development were explored using multivariate data analysis (MVA) techniques, including partial least-squares regression (PLSR) and discriminant analysis (PLS-DA). POPs were found in all cord blood samples, corroborating the transplacental transfer (TPT) of these xenobiotics. Chlordanes and PCBs were observed to have adverse effects on fetal growth (i.e. birth weight, length, head circumference) and health (as indicated by Apgar scores), indicating the chemical exposure in utero could also be deemed as an influential factor on fetal growth, even at the normal doses in general population. Maternal height, weight, ethnicity, dietary habits and lifestyle were also the determinants for the neonatal variables. Exposure to POPs may alter maternal hormone levels, which could regulate the offspring sex. Trans-chlordane, p,p'-DDE, p,p'-DDT and PCB 138 and 158 were speculated as testosterone triggers which lead to more baby boys, while the effects of beta-HCH and PCB 180 were opposite.     

Recycling municipal,agricultural and industrial waste into energy,fertilizers, food and construction materials,and economic feasibility: a review

The global amount of solid waste has dramatically increased as a result of rapid population growth, accelerated urbanization, agricultural demand, and industrial development. The world's population is expected to reach 8.5 billion by 2030, while solid waste production will reach 2.59 billion tons. This will deteriorate the already strained environment and climate situation. Consequently, there is an urgent need for methods to recycle solid waste. Here, we review recent technologies to treat solid waste, and we assess the economic feasibility of transforming waste into energy. We focus on municipal, agricultural, and industrial waste. We found that methane captured from landfilled-municipal solid waste in Delhi could supply 8–18 million houses with electricity and generate 7140 gigawatt-hour, with a prospected potential of 31,346 and 77,748 gigawatt-hour by 2030 and 2060, respectively. Valorization of agricultural solid waste and food waste by anaerobic digestion systems could replace 61.46% of natural gas and 38.54% of coal use in the United Kingdom, and could reduce land use of 1.8 million hectares if provided as animal feeds. We also estimated a levelized cost of landfill solid and anaerobic digestion waste-to-energy technologies of $0.04/kilowatt-hour and $0.07/kilowatt-hour, with a payback time of 0.73–1.86 years and 1.17–2.37 years, respectively. Nonetheless, current landfill waste treatment methods are still inefficient, in particular for treating food waste containing over 60% water.

     

Assessment of Cu, Pb, and Zn contamination in sediment of north western Peninsular Malaysia by using sediment quality values and different geochemical indices

Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.     

Allozyme polymorphisms and heavy metal levels in the green-lipped mussel Perna viridis (Linnaeus) collected from contaminated and uncontaminated sites in Malaysia

It has been widely reported that heavy metal contamination in coastal waters can modify the allozyme profiles of marine organisms. Previous studies have recorded elevated metal concentrations in sediments and mussel tissues off Peninsular Malaysia. In the present study, horizontal starch gel electrophoresis was carried out to estimate the levels of allelic variation of the green-lipped mussel, Perna viridis, collected from one contaminated and three relatively uncontaminated sites off Peninsular Malaysia. Fourteen polymorphic loci were observed. In addition, the concentrations of cadmium, copper, lead, mercury and zinc were determined in the sediments and in the soft tissues of the mussels. Mussels from contaminated site, evidenced by high metal pollution indices (MPI) of the sediment and the mussel tissues, showed the highest percentage of polymorphic loci (78.6%), while those collected from the uncontaminated sites had lower MPI of the sediment and mussel tissue, and exhibited lower percentages of polymorphic loci (35.7-57.1%). The population from the contaminated site showed the highest excess of heterozygosity (0.289) when compared to that of the populations from the three uncontaminated sites (0.108-0.149). Allozyme frequencies at the phosphoglucomutase (PGM; E.C. 2.7.5.1) locus also differed between the contaminated and uncontaminated populations. Previous studies have shown that exposure to heavy metals can select or counter-select for particular alleles at this locus. The present results suggest that allozyme polymorphism in P. viridis is a potential biomonitoring tool for heavy metal contamination but further validation is required.     

Distribution of heavy metal concentrations in the different soft tissues of the freshwater snail Pomacea insularum (D’Orbigny, 1839; Gastropoda), and sediments collected from polluted and unpolluted sites from Malaysia

Pomacea insularum were collected from polluted and unpolluted freshwater ecosystems in Malaysia. Besides the shells, the soft tissues were dissected and pooled into cephalic tentacle, foot, mantle, operculum, digestive tract, penial sac, lung sac, and remainder. These tissues were analyzed for the concentrations of Cu, Cd, Fe, Ni, and Zn. The present work resulted in three interesting findings. First, the concentrations of Cu, Cd, Fe, and Zn found in most of the different parts of P. insularum collected from the polluted Juru River were significantly (P < 0.05) higher than those found in the snails from the other four sites. Second, positive and significant correlation coefficients were found for sediment-lung sac for Cd, Fe, and Zn while sediment-digestive tract for Cu. These correlation results indicated that lung sacs could reflect the environmental concentrations of Cd, Fe, and Zn, while the digestive tract could do the same for Cu. Third, the different concentrations of heavy metals found in the different parts indicated different metal regulation and binding sites in these organs. The significant correlation coefficients between different tissues indicated that they might be caused by similar metal regulation and sequestration. Based on the above findings, P. insularum are a potential biomonitor of Cd, Cu, Fe, and Zn pollution in freshwater ecosystems.     

Circular economy strategies for combating climate change and other environmental issues

Global industrialization and excessive dependence on nonrenewable energy sources have led to an increase in solid waste and climate change, calling for strategies to implement a circular economy in all sectors to reduce carbon emissions by 45% by 2030, and to achieve carbon neutrality by 2050. Here we review circular economy strategies with focus on waste management, climate change, energy, air and water quality, land use, industry, food production, life cycle assessment, and cost-effective routes. We observed that increasing the use of bio-based materials is a challenge in terms of land use and land cover. Carbon removal technologies are actually prohibitively expensive, ranging from 100 to 1200 dollars per ton of carbon dioxide. Politically, only few companies worldwide have set climate change goals. While circular economy strategies can be implemented in various sectors such as industry, waste, energy, buildings, and transportation, life cycle assessment is required to optimize new systems. Overall, we provide a theoretical foundation for a sustainable industrial, agricultural, and commercial future by constructing cost-effective routes to a circular economy.

     

Social,environmental, and economic consequences of integrating renewable energies in the electricity sector: a review

The global shift from a fossil fuel-based to an electrical-based society is commonly viewed as an ecological improvement. However, the electrical power industry is a major source of carbon dioxide emissions, and incorporating renewable energy can still negatively impact the environment. Despite rising research in renewable energy, the impact of renewable energy consumption on the environment is poorly known. Here, we review the integration of renewable energies into the electricity sector from social, environmental, and economic perspectives. We found that implementing solar photovoltaic, battery storage, wind, hydropower, and bioenergy can provide 504,000 jobs in 2030 and 4.18 million jobs in 2050. For desalinization, photovoltaic/wind/battery storage systems supported by a diesel generator can reduce the cost of water production by 69% and adverse environmental effects by 90%, compared to full fossil fuel systems. The potential of carbon emission reduction increases with the percentage of renewable energy sources utilized. The photovoltaic/wind/hydroelectric system is the most effective in addressing climate change, producing a 2.11–5.46% increase in power generation and a 3.74–71.61% guarantee in share ratios. Compared to single energy systems, hybrid energy systems are more reliable and better equipped to withstand the impacts of climate change on the power supply.