Effects of coral transplantation in sites of varying distances and environmental conditions

Several scleractinian coral species with different growth forms and life history strategies were studied in terms of colony growth (expressed as projected linear increment) and survivorship over a range of distances and environmental conditions in the Philippines. The experimental design consisted of 1 m² plots grouped within a reef site, to several sites within reef systems separated by a distance of about 340 km. There were distinct differences among species, with submassive and massive forms displaying slower growth but better survival, confirming results of other studies. They probably play the role of framework builders of the reef. In contrast, the delicate branching and foliose species had higher growth rates but poor survivorship. This observation, plus their ease of fragmentation, suggests they act more as fillers of the reef matrix. There was high variability in colony increment of a species among the square meter plots, but not among sites within a reef system. Thus, more regular pattern could be observed at this level. In contrast to growth, survivorship differed significantly among sites, being lowest in the site which harbored the greatest amount of dead coral. Growth and survival, however, are not sufficient performance measures to evaluate the success of coral transplantation. Reproduction and subsequent recruitment must also be taken into account. It is recommended that coral transplant and restoration studies consider the broad environmental context of restoration and seek to develop assembly rules that will allow practitioners to match coral types and sequence of interventions to each unique context.     

Mercury concentrations in the surface sediments of the intertidal area along the west coast of Peninsular Malaysia

Total mercury (Hg) levels in the intertidal surface sediments along the west coast of Peninsular Malaysia were analysed by using heat vaporization method. Total Hg levels in these sediments ranged from 3.00 to 201?µg?kg^?1 dry weight with a mean concentration of 60.0?µg?kg^?1 dry weight. More than 90% of the samples studied have the total Hg concentrations less than 150?µg?kg^?1 dry weight. Compare with the regional data and sediment quality guidelines, the Hg contamination in the intertidal area along the west coast of Peninsular Malaysia was not serious, except for a few sites that might have received anthropogenic Hg in the samples collected between 1999 and 2000. It is suggested that a similar study of heavy metals in the sediments of the west coast of Peninsular Malaysia be conducted regularly.     

Callyspongia samarensis (Porifera) extracts exhibit anticancer activity and induce bleaching in Porites cylindrica (Scleractinia)

Marine sponges can produce allelopathic compounds with specific roles in the competition for benthic space. Here we demonstrate that extracts from Callyspongia samarensis (Phylum Porifera) accelerate bleaching in Porites cylindrica (Phylum Cnidaria, Order Scleractinia) and exhibit in vitro anticancer activity. A column chromatography fraction and HPLC fraction, purified from the crude methanol extract of C. samarensis, were incorporated into agar gel cubes at natural concentrations and tested on P. cylindrica corals in a laboratory assay. Statistical analysis of percent bleached area and maximum quantum yield showed that a significant difference existed between P. cylindrica nubbins that were exposed to C. samarensis extracts versus the control group. This suggests that C. samarensis contains allelopathic compounds that can cause bleaching in P. cylindrica, possibly leading to tissue necrosis and death. Furthermore, the aforementioned HPLC fraction exhibited significant growth inhibition of the HCT-116 (human colon cancer) cell line. Understanding the strategies by which sponges exert dominance over other organisms is important because it provides information about the ecological roles of sponge allelopathy and can result in the discovery of compounds with biomedical potential.     

Sonication and grinding pre-treatments on <Emphasis Type="Italic">Gelidium amansii</Emphasis> seaweed for the extraction and characterization of Agarose

Various pretreatments methods including sonication and grinding were performed on red seaweed Gelidium amansii for the subsequent extraction of agarose. The agarose products are usually extracted from agar powder products from seaweeds. In this study, the agarose was extracted using a direct polyethylene glycol (PEG) method without the need to first process the agar from seaweed. The agar extract was frozen then thawed and mixed directly with PEG solution to precipitate the agarose. The quality of agarose obtained was evaluated through physico-chemical properties analysis which includes spectral technique (FTIR), melting and boiling point, gel strength and sulfate content. These properties were compared with a non-pretreated sample and it was found that the addition of pretreatment steps improved the quality of agarose but gave a slightly lower yield. The gel strength of pretreated samples was much higher and the sulfate content was lower compared to non-pretreated samples. The best pretreatment method was sonication which gave gel strength of 742 g cm^-2 and sulfate content of 0.63%. The extraction of agarose can be further improved with the use of different neutralizing agents. Pretreating the seaweed shows potential in improving the quality of agarose from seaweed and can be applied for future extraction of the agarose.

Open image in new window

     

Cost,environmental impact,and resilience of renewable energy under a changing climate: a review

Energy derived from fossil fuels contributes significantly to global climate change, accounting for more than 75% of global greenhouse gas emissions and approximately 90% of all carbon dioxide emissions. Alternative energy from renewable sources must be utilized to decarbonize the energy sector. However, the adverse effects of climate change, such as increasing temperatures, extreme winds, rising sea levels, and decreased precipitation, may impact renewable energies. Here we review renewable energies with a focus on costs, the impact of climate on renewable energies, the impact of renewable energies on the environment, economy, and on decarbonization in different countries. We focus on solar, wind, biomass, hydropower, and geothermal energy. We observe that the price of solar photovoltaic energy has declined from $0.417 in 2010 to $0.048/kilowatt-hour in 2021. Similarly, prices have declined by 68% for onshore wind, 60% for offshore wind, 68% for concentrated solar power, and 14% for biomass energy. Wind energy and hydropower production could decrease by as much as 40% in some regions due to climate change, whereas solar energy appears the least impacted energy source. Climate change can also modify biomass productivity, growth, chemical composition, and soil microbial communities. Hydroelectric power plants are the most damaging to the environment; and solar photovoltaics must be carefully installed to reduce their impact. Wind turbines and biomass power plants have a minimal environmental impact; therefore, they should be implemented extensively. Renewable energy sources could decarbonize 90% of the electricity industry by 2050, drastically reducing carbon emissions, and contributing to climate change mitigation. By establishing the zero carbon emission decarbonization concept, the future of renewable energy is promising, with the potential to replace fossil fuel-derived energy and limit global temperature rise to 1.5 °C by 2050.

     

Optimizing biomass pathways to bioenergy and biochar application in electricity generation,biodiesel production,and biohydrogen production

The current energy crisis, depletion of fossil fuels, and global climate change have made it imperative to find alternative sources of energy that are both economically sustainable and environmentally friendly. Here we review various pathways for converting biomass into bioenergy and biochar and their applications in producing electricity, biodiesel, and biohydrogen. Biomass can be converted into biofuels using different methods, including biochemical and thermochemical conversion methods. Determining which approach is best relies on the type of biomass involved, the desired final product, and whether or not it is economically sustainable. Biochemical conversion methods are currently the most widely used for producing biofuels from biomass, accounting for approximately 80% of all biofuels produced worldwide. Ethanol and biodiesel are the most prevalent biofuels produced via biochemical conversion processes. Thermochemical conversion is less used than biochemical conversion, accounting for approximately 20% of biofuels produced worldwide. Bio-oil and syngas, commonly manufactured from wood chips, agricultural waste, and municipal solid waste, are the major biofuels produced by thermochemical conversion. Biofuels produced from biomass have the potential to displace up to 27% of the world's transportation fuel by 2050, which could result in a reduction in greenhouse gas emissions by up to 3.7 billion metric tons per year. Biochar from biomass can yield high biodiesel, ranging from 32.8% to 97.75%, and can also serve as an anode, cathode, and catalyst in microbial fuel cells with a maximum power density of 4346 mW/m². Biochar also plays a role in catalytic methane decomposition and dry methane reforming, with hydrogen conversion rates ranging from 13.4% to 95.7%. Biochar can also increase hydrogen yield by up to 220.3%.

     

Artificial intelligence-based solutions for climate change: a review

Environmental Chemistry Letters - Climate change is a major threat already causing system damage to urban and natural systems, and inducing global economic losses of over $500 billion. These issues...     

Growth of Acropora pulchra

Transplantation experiments were carried out on the branching hermatypic coral Acropora pulchra (Brook) from October 1980 to March 1982 in the northern Philippines. Primary objectives were to determine the effects on the coral of the stresses associated with transplantation, relocation, and the use of different artificial substrates such as flagstones and tires, and to determine possible effects of sedimentation on survival and growth of the transslants. Results of transplantation at different times of the year were also assessed. Comparisons of the responses of transplants with those of undisturbed, control colonies indicated possible significant effects of transplantation tending to retard growth. Sedimentation likewise appeared to suppress growth of the transplants. Growth and survival of the transplants may have been further inhibited by transplantation during the warmer times of the year, and by setting them in prone positions on tires. Effects of relocation at varying distances from source colonies appeared to be negligible.     

Factors affecting the leaching of lead from UPVC pipes

This paper summarizes the results of a series of studies on the various factors that affect the leaching of lead from unplasticized poly(vinyl chloride) (UPVC) pipes. Factors that were studied include temperature, pH and extractants. Results showed that, for a given UPVC pipe, the rate of leaching of lead depended primarily on temperature and the nature of extractants. While the rate of leaching of lead was quite low with distilled water, it was very much enhanced by the presence of low concentration of anions such as Cl^-, HPO _inf4 ^sup2- HCO _inf3 ^sup- , NO _inf3 ^sup- , SO _inf4 ^sup2- and EDTA. EDTA, being a strong complexing agent, was most effective. Rates of leaching were found to be higher at elevated temperature except in the cases of HPO _inf4 ^sup2- and EDTA. Effect of pH was not pronounced. The temperature at which the UPVC pipes were extruded was found to affect the rate of leaching of lead. Pipes extruded at 190°C were found to have lower rate of leaching than those extruded at 180°C and 170°C. Analysis of the pipes by Scanning Electron Microscopy showed that the distribution of lead in the pipes extruded at 190°C was more uniform than those extruded at 170°C.     

Strontium/calcium ratio analysis of molluscan shells in Singapore waters using the X-ray fluorescence technique

The Sr/Ca ratios in molluscan shells in Singapore waters were measured using the X-ray fluorescence (XRF) technique. Our results show that the Sr/Ca ratio varies greatly among different species. However, within the same species, this ratio is practically the same for samples collected from sites close together but varies significantly for samples from sites far apart. Furthermore, this study shows that whole shell analysis using the XRF technique is simple and quick and that its application to environmental monitoring seems feasible.