Morphology-dependent interfacial interactions of Fe2O3 with Ag nanoparticles for determining the catalytic reduction of p-nitrophenol

In this work,we fabricated three kinds of Ag/Fe_2O_3 model catalysts with different morphologies to study the interfacial interactions between Ag and Fe_2O_3,and how they affected the catalytic activity in hydrogenation of p-nitrophenol was explored.The hydrothermal method was used to synthesize the metal oxide supported silver catalyst,with various morphologies including nanoplates(NPs),nanospheres(NSs),and nanocubes(NCs).The crystal structure,morphology and surface elements of the composite were investigated by various measurements,such as X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray photoelectron spectroscopy(XPS).The catalytic activity was also evaluated by the reduction of p-nitrophenol to p-aminophenol.It was found that the activities of the above catalysts varied with the morphology of the support.Among them,Ag/Fe_2O_3 NPs promoted the highest performance,Ag/Fe_2O_3 NSs were slightly inferior,and Ag/Fe_2O_3 NCs were the worst.At last,we ascribed the remarkable activity of Ag/Fe_2O_3 NPs to the strong metal-support interactions between Ag and Fe_2O_3.     

On-going nitrification in chloraminated drinking water distribution system (DWDS) is conditioned by hydraulics and disinfection strategies

Within the drinking water distribution system (DWDS) using chloramine as disinfectant, nitrification caused by nitrifying bacteria is increasingly becoming a concern as it poses a great challenge for maintaining water quality. To investigate efficient control strategies, operational conditions including hydraulic regimes and disinfectant scenarios were controlled within a flow cell experimental facility. Two test phases were conducted to investigate the effects on the extent of nitrification of three flow rates (Q = 2, 6, and 10 L/min) and four disinfection scenarios (total Cl₂=1 mg/L, Cl₂/NH₃-N=3:1; total Cl₂=1 mg/L, Cl₂/NH₃-N=5:1; total Cl₂=5 mg/L, Cl₂/NH₃-N=3:1; and total Cl₂=5 mg/L, Cl₂/NH₃-N=5:1). Physico-chemical parameters and nitrification indicators were monitored during the tests. The characteristics of biofilm extracellular polymetric substance (EPS) were evaluated after the experiment. The main results from the study indicate that nitrification is affected by hydraulic conditions and the process tends to be severe when the fluid flow transforms from laminar to turbulent (2300<Re<4000). Increasing disinfectant concentration and optimizing Cl₂/NH₃-N mass ratio were found to inhibit nitrification to some extend when the system was running at turbulent condition (Q = 10 L/min, Re = 5535). EPS extracted from biofilm that was established at the flow rate of 6 L/min had greater carbohydrate/protein ratio. Furthermore, several nitrification indicators were evaluated for their prediction efficiency and the results suggest that the change of nitrite, together with total organic carbon (TOC) and turbidity can indicate nitrification potential efficiently.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

长江流域2000—2015年生态系统质量及服务变化特征

分析生态系统质量与服务现状及变化特征,有助于准确了解流域生态系统状况与趋势,为流域生态保护与修复的高效管理提供参考依据.采用相对生物量密度与相对植被覆盖度指数以及生态系统服务（土壤保持、防风固沙、洪水调蓄、粮食生产）评估模型,评估2000—2015年长江流域生态系统质量及服务变化特征.结果表明:①2000—2015年,长江流域森林、灌丛以及草地生态系统质量提升显著,56.56%的森林、45.65%的灌丛以及19.26%的草地生态系统质量得到不同程度的提高.②研究期间,长江流域粮食生产、洪水调蓄、土壤保持、防风固沙均呈显著上升趋势,其中粮食生产能力增加13.7%,洪水调蓄功能提升10.1%,土壤保持服务提高19.5%,防风固沙总量增加30.0%.③长江流域生态系统质量不高,处于低与差质量等级的生态系统面积比例在25%~35%之间;受不同类型的自然和人类活动影响,长江流域生态系统质量与服务均存在局部退化现象.研究显示,在生态质量与服务评估的基础上,分区域、分类型实施不同的生态系统保护与恢复途径,是今后长江流域加强生态系统管理的重要途径.      

基于PCA-SOM的北京市平谷区地下水污染溯源

为了解北京市平谷区地下水污染物来源,以平谷区2010—2018年监测数据为基础,使用PCA(主成分分析法)识别了地下水水质指标因子,使用自组织映射识别了污染物的空间分布.结果表明:通过监测指标间的Pearson检验发现, 平谷区地下水电导率与ρ(Ca2+)(p=0.936)、总碱度与ρ(HCO₃2-)(p=0.981)、ρ(Mg2+)与总硬度(p=0.944)指标之间显著相关.地下水化学类型主要以HCO₃-Ca型为主,其次为HCO₃-Mg型.NH₄+、SO₄2-、Cd、Fe(Ⅱ)、NO₂指标空间分布离散性和差异性较大,存在局部富集现象.通过因子分析法筛选出影响平谷区地下水水质的8个公因子,首要影响因子为溶滤-富集作用(贡献率为22.398%),次要影响因子为农业、养殖业和填埋场等人为活动作用(贡献率为16.533%),雨水下渗作用(贡献率为8.035%)、工业源人为活动(贡献率为7.466%)对地下水也有一定影响.通过比较各指标的SOM(Self-Organizing Map,自组织映射)特征图像和监测井映射特征图像,发现NH₄+受山前地带林业、种植业和平原地带农业、养殖业的双重影响,Na+、Mn受平原地带人为活动的影响;同时,NH₄+、NO₃-、NO₂三者之间及Fe(Ⅱ)与Fe(Ⅲ)之间来源不同,Cd、Al、氰化物三者具有同一来源.研究显示,PCA-SOM(PCA与SOM相结合)可以对地下水化学组分来源进行定性识别与定量分析.      

基于能值理论的农田—畜禽生产系统可持续动态

为了解我国东南丘陵山区农业生产动态及其可持续性,以福建典型山区德化县为例,构建废弃物能值比例、环境污染能值负产出等指标,运用能值理论定量分析德化县2007—2016年农田—畜禽生产系统投入产出、环境负荷及可持续性的变化。结果表明：德化县农田—畜禽生产系统能值投入以购买能值为主,占能值总投入的68%~79%,水资源能值约占21%~31%;畜禽子系统能值产出占72%以上;能值密度在2.68×10¹²~3.33×10¹² sej·m^-2之间波动上升,净能值产出率下降40%,环境负荷明显加重,2015年以来有所减轻;可持续发展指数在2007—2010年短暂上升后快速下降,由1.14降至0.42。从构建的指标来看,系统废弃物能值比例有所下降,环境污染能值产出减少约22%,综合经济效益和废弃物利用情况,近年来可持续发展状况逐渐好转。德化县目前正处于农田—畜禽系统产出结构调整期,应增加系统内部反馈能值用量,控制化肥、饲料投入,提高废弃物利用率,以实现可持续发展。     

三江源植被碳利用率动态变化及其对气候响应

本文基于MODIS GPP/NPP数据估算了三江源植被碳利用率（CUE）,结合气象数据和高程数据采用一元线性回归和相关分析法,探讨了2001~2017年三江源植被CUE的时空变化特征及植被CUE对气温、降水量和蒸散量变化的响应.结果表明：（1）三江源植被CUE年内3~10月表现为先增加后降低的变化趋势,其中6月植被CUE最高.（2）三江源年植被碳利用率位于0.73~1,平均水平为0.85;植被CUE空间上呈现北高南低,西高东低的分布特征.（3）整体上,三江源4~10月植被碳利用率与同期气温、降水量和蒸散量分别呈现正相关、负相关和负相关关系,降水量是影响三江源植被CUE变化的主要影响因素,气温为次要因素,蒸散量影响程度最小.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.