正The folloing works were presented at the 5th Sino-French Joint Workshop on Atmospheric Environment:Air Quality Improvement and Future Challenges:Sciences,TechnologiesSolutions on October 11-14,2016.They received the Best Poster Awards that were sponsored by the Journal of Environmental Sciences. 相似文献
To reveal the basic characteristics and controlling factors of water quality change in the project Wenyu to Chaobai reclaimed water diversion, the water quality in the study area was monitored for one year at seven monitoring sites. Inverse geochemical models of the statistical groups were developed using PHREEQC to elucidate the hydrochemistry characteristics of reclaimed water and the factors. The monitoring results indicated that nitrogen and phosphorus contents were significantly reduced along the river mainly caused by seasonal and location variation. The pH ranged from 7.44 to 9.81. Photosynthesis of algae and denitrification in anaerobic microenvironment ultimately led to a sudden p H increase after the Jian River and the Chaobai River confluence. Mg~(2+)and SO_4~(2-) levels dropped obviously in the summer and increased in winter seasons after intersection. Na+and Cl-are relatively stable, and marked drop in the concentration only after the two rivers meet. And there is a decrease of Ca~(2+) and HCO~(3-) and increase in CO_3~(2-) during monitoring period. As a whole, the primary ions and nutrient components, including nitrogen and phosphorus, had high levels in winter. Algae's photosynthesis and respiration were observed to have an impact on the river water quality; there was precipitation–dissolution of minerals and denitrification from upstream to downstream. Inverse geochemical PHREEQC modeling confirmed that there was precipitation of aragonite or calcite, and gypsum or anhydrite in summer, and dissolution in winter; as well as precipitation of dolomite in winter, and cationic exchange and denitrification along the river. 相似文献
The pH-dependent leaching of antimony (Sb) and arsenic (As) from three typical Sb-bearing ores (Banxi, Muli and Tongkeng Antimony Mine) in China was assessed using a pH-static leaching experiment. The pH changes of the leached solutions and pH-dependent leaching of Sb and As occurred in different ways. For the Banxi and Muli Sb ores, alkaline conditions were more favorable for the release of Sb compared to neutral and acidic conditions, but the reverse was true for the pH-dependent release of As. For the Tongkeng Sb ore, unlike the previous two Sb-bearing ores, acidic conditions were more favorable for Sb release than neutral and alkaline conditions. The ores with lower Sb and As contents released higher percentages of their Sb and As after 16 day leaching, suggesting that they are the largest potential sources of pollution. This work may provide key information on the geochemistry of Sb and As in the weathering zone. 相似文献
Removal of toxic pollutants from water and wastewater is becoming an important process with the increase of industrial activities. The present study focused on assessing the suitability and efficiency of water bamboo leaves (WBL) for the removal of cationic dye from aqueous solutions. The effect of different variables in the batch method including solution pH (2–12), initial dye concentration (50–250 mg L?1), adsorbent dose (0.05–0.30 g), contact time (5–180 min) and temperature (283–333 K) on the dye removal was investigated. The adsorption kinetics was discussed in view of four kinetics models. The results showed that the pseudo-second-order kinetics model described dye adsorption on WBL very well. The experimental equilibrium data were also tested by four isotherm models. It was found that adsorption of dye on WBL fitted well with the Langmuir isotherm model, implying the binding energy on the whole surface of the adsorbent was uniform and the dye molecules onto the surface of the adsorbent were monolayer coverage. Calculation of various thermodynamic parameters of the adsorption process indicated feasibility and exothermic nature of dye adsorption. 相似文献
Tests were performed to compare the evaporation rate of 10 volume percent (vol%) ethanol-blended gasoline (E10) with the evaporation rate of its base gasoline. Weight loss, temperature, pressure, and humidity were monitored as lab-blended E10 and base gasolines were evaporated concurrently from glass cylinders placed on balances located side by side under an exhaust hood. The averaged results of four tests at about 70°F showed that the E10 lost more total weight to evaporation than the base fuel, but less gasoline. The increased weight was due to ethanol, which was present in the E10 evaporative emissions at concentrations of about 13 weight percent (wt%). In two-hour tests at temperatures near 70°F, during which 4.5 to 5.3 wt% of initial fuel samples were evaporated, E10 fuels lost an average of about 5% less gasoline than their base fuels. A similar result was obtained for a one-hour test, during which about 2.4 to 2.5 wt% of the initial fuel samples were evaporated. Gas chromatography (GC) component analysis indicated that the compositions of the ethanol-free emissions from the two fuels were similar. Reid vapor pressure (RVP) measurements made using a Grabner CCA-VPS according to ASTM D5191-91 indicated that E10 fuels underwent an approximate 5% greater RVP reduction than their respective base fuels. 相似文献
Environmental Science and Pollution Research - The conversion of CO2 into useful raw materials for fuels and chemicals by solar energy is described using a plasmonic photocatalyst comprised of Ag... 相似文献
Humic acids (HAs) determine the distribution, toxicity, bioavailability, and ultimate fate of heavy metals in the environment. In this work, ten HA fractions (F1–F10) were used as adsorbent, which were sequentially extracted from natural sediments of Lake Wuliangsuhai, to investigate the binding characteristics of Cu2+ to HA. On the basis of the characterization results, differences were found between the ten extracted HA fractions responding to their elemental compositions and acidic functional groups. The characterization results reveal that the responses of ten extracted HA fractions to their elemental compositions and acidic functional groups were different. The O/C and (O + N)/C ratio of F1–F8 approximately ranged from 0.66 to 0.53 and from 0.72 to 0.61, respectively; the measured results showed that the contents of phenolic groups and carboxyl groups decreased from 4.46 to 2.60 mmol/g and 1.60 to 0.58 mmol/g, respectively. The binding characteristics of Cu2+ to the ten HA fractions were well modeled by the bi-Langmuir model; the binding behavior of Cu2+ to all the ten HA fractions were strongly impacted by pH and ionic strength. The FTIR and SEM-EDX image of HA fractions (pre- and post-adsorption) revealed that carboxyl and phenolic groups were responsible for the Cu2+ sorption on the ten sequentially extracted HA fractions process, which is the same with the analysis of the ligand binding and bi-Langmuir models Accordingly, the adsorption capacity of the former HA fractions on Cu2+ were higher than the latter ones, which may be attributed to the difference of carboxyl and phenolic group contents between the former and latter extracted HA fractions. Additionally, the functional groups with N and S should not be neglected. This work is hopeful to understand the environmental effect of humic substances, environmental geochemical behavior, and bioavailability of heavy metals in lakes.