Application of 15N–18O double stable isotope tracer technique in an agricultural nonpoint polluted river of the Yangtze Delta Region

One strategy to combat nitrate (NO₃-N) contamination in rivers is to understand its sources. NO₃-N sources in the East Tiaoxi River of the Yangtze Delta Region were investigated by applying a ¹⁵N–¹⁸O dual isotope approach. Water samples were collected from the main channel and from the tributaries. Results show that high total N and NO₃-N are present in both the main channel and the major tributaries, and NO₃-N was one of the most important N forms in water. Analysis of isotopic compositions (δ ¹⁸O, δD) of water suggests that the river water mainly originated from three tributaries during the sampling period. There was a wide range of δ ¹⁵N-NO₃ (?1.4 to 12.4 ‰) and a narrow range of δ ¹⁸O-NO₃ (3.7 to 9.0 ‰) in the main channel waters. The δ ¹⁵N and δ ¹⁸O-NO₃ values in the upper, middle, and lower channels along the river were shifted as 8.2, 3.5, and 9.5 ‰, and 9.0, 4.2, and 6.0 ‰, respectively. In the tributary South Tiao, the δ ¹⁵N and δ ¹⁸O-NO₃ values were as high as 9.5 and 7.0 ‰, while in the tributaries Mid Tiao and North Tiao, NO₃-N in most of the samples had relatively low δ ¹⁵N and δ ¹⁸O-NO₃ values from 2.3 to 7.5 ‰ and 4.7 to 7.0 ‰, separately. Our results also suggest that the dual isotope approach can help us develop the best management practice for relieving NO₃-N pollution in the rivers at the tributary scale.     

Swine wastewater treatment in a two stage sequencing batch reactor using real‐time control

Abstract

A laboratory scale two‐stage sequencing batch reactor (TSSBR) was used to study the effectiveness of pH as a real‐time control parameter in swine wastewater treatment. A Ringlace media was inserted into the A/O (Anoxic/Oxic) reactor for bacteria immobilization. The TSSBR was subjected to three levels of organic loading. The pH and ORP (Oxidation Reduction Potential) patterns obtained were consistent with distinct features, enabling the real‐time control strategy to effectively set a flexible aeration time pending on influent concentration, hence resulting in flexible cycle time and HRT (Hydraulic Retention Time) for the system. The real‐time process ensured a removal efficiency of over 99% and 95%, respectively, for ammonia and TOC (Total Organic Carbon). For NO₃ ^‐‐N and PO₄ ^‐3, the run with influent TOC = 4,000 mg/L yielded the most efficient removal of 61% and 95%, respectively. Test results suggest that pH can be a viable tool for on‐line real‐time control of a biological treatment process.     

Effects of pH and ionic strength on sulfamethoxazole and ciprofloxacin transport in saturated porous media

Many antibiotics regarded as emerging contaminants have been frequently detected in soils and groundwater; however, their transport behaviors in soils remain largely unknown. This study examined the transport of two antibiotics, sulfamethoxazole (SMZ) and ciprofloxacin (CIP), in saturated porous media. Laboratory columns packed with quartz sand was used to test the effects of solution pH and ionic strength (IS) on their retention and transport. The results showed that these two antibiotics behaved differently in the saturated sand columns. In general, SMZ manifested a much higher mobility than CIP for all experimental conditions tested. Almost all SMZ transported through the columns within one pore volume in deionized water (i.e., pH=5.6, IS=0), but no CIP was detected in the effluents under the same condition after extended column flushing. Perturbations in solution pH (5.6 and 9.5) and IS (0 and 0.1M) showed no effect on SMZ transport in the saturated columns. When pH increased to 9.5, however, ~93% of CIP was eluted from the sand columns. Increase of IS from 0 to 0.1M also slightly changed the distribution of adsorbed CIP within the sand column at pH 5.6, but still no CIP was detected in the effluents. A mathematical model based on advection-dispersion equation coupled with equilibrium and kinetic reactions successfully simulated the transport of the antibiotics in water-saturated porous media with R(2)=0.99.     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

MODELS FOR WATER AND POWER SCHEDULING FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A large-scale simulation/optimization model provides schedules for operation of water and power for the California State Water Project (SWP). The SWP consists of a series of reservoirs linked by rivers, pumping plants, canals, tunnels, and generating plants and is operated by the California Department of Water Resources. The Department provides water to municipal and agricultural users, and manages its electrical loads and resources. The model, therefore, performs hydraulic and electrical computations leading to optimal operation of the entire system. It consists of hydraulic network programming components to meet the storage objectives at all the reservoirs, a linear programming component to determine the schedules at pumping and generating plants, an electrical network programming component to balance electrical loads and resources, and a number of other simulation components. It operates on yearly, weekly, and daily bases. It is primarily used for real-time operation of the SWP and can provide hourly detail schedules which are implemented by the SWP staff via a computerized system.     

Inhibition of microbial activity of activated sludge by ammonia in leachate

Leachate samples were collected from the West New Territory Landfill (WENT), Hong Kong, and characterized in the laboratory. The analytical results confirmed that it has a typical nature of aged leachate with a low BOD₅/COD ratio of 0.22 and a high strength of ammonia-nitrogen around 5 g/L. A lab-scale study was conducted to investigate the inhibition of microbial activity of the activated sludge. In the first test, glucose-based synthetic wastewater was used in two parallel reactors. The experimental results demonstrated that COD removal declined from 95.1 to 79.1% and the dehydrogenase activity of the sludge decreased from 11.04 to 4.22 μg TF/mg mixed liquor suspended solids (MLSS), when the ammonia-nitrogen concentration increased from 50 mg/L to 800 mg/L progressively. The remaining NH₃⁺-N residue in the treated wastewater increased from 0.58 mg/L to 649 mg/L extensively. In the second test, mixed wastewater samples containing glucose and raw leachate were fed into six parallel biological reactors and operated on batch mode. The experimental results showed COD removal decreased from 97.7 to 78.1% and the dehydrogenase activity decreased from 9.29 to 4.93 μg triphenyl formazon (TF)/mg MLSS, respectively, when the ammonia-nitrogen concentration increased within the same range. Microbial inhibition could also be substantiated by a decrease of specific oxygen uptake rate (SOUR) from 68 to 45 mg O₂/g MLSS. These results suggested leachate containing high-strength ammonia-nitrogen should be pretreated to an acceptable NH₄⁺-N level before it is fed into biological reactors.     

Induced anti-predator responses of the green mussel, Perna viridis (L.), on exposure to the predatory gastropod, Thais clavigera Küster, and the swimming crab, Thalamita danae Stimpson

A laboratory experiment was conducted to test whether anti-predator responses could be induced in the green mussel, Perna viridis, on exposure to waterborne cues from two predators, the muricid gastropod, Thais clavigera, and the portunid crab, Thalamita danae, and from damaged conspecifics. There were five treatments in this study. Aquaria of two treatments housed either Thalamita danae or Thais clavigera. Another three treatments housed only intact mussels, broken and intact mussels, or no mussels. No significant differences were found among these five treatments in final shell weight and tissue dry weight. Induced defensive responses were predator-specific. Experimental mussels exposed to waterborne cues of T. clavigera had a higher percentage increase in shell length, height and width, whereas those exposed to waterborne cues of T. danae had a higher percentage increase in shell width and height. Mussels raised in the presence of crabs developed thicker shell at the umbo and lip margin, whereas mussels raised in the presence of gastropods had thicker shell lip. Predator preference for mussels from the control group and for those pre-exposed to waterborne cues of either of the predators was studied. T. clavigera preferentially selected mussels from the control group, whereas no prey preference was found for T. danae, although shell breaking time for mussels exposed to a crab was longer than that for the control. While the present results should be viewed with caution in the absence of a dietary control, this was the first time that prey handling was shown to be affected by defensive changes in the morphology of mussels.Communicated by T. Ikeda, Hakodate     

239+240Pu, 90Sr and 137Cs inventories in surface soils of Vietnam

Fallout 239+240Pu, 238Pu, 90Sr and 137Cs inventories in surface soils were measured for 20 locations in northern Vietnam yielding the mean values (+/- standard error) of 26.5+/-3.8 Bq m(-2) for 239+240Pu, 1048+/-143 Bq m(-2) for 137Cs and 212+/-28 Bq m(-2) for 90Sr. The concentrations of 137Cs and plutonium isotopes strongly correlate with each other resulting in a stable 239+240Pu/137Cs inventory ratio of 0.025+/-0.002. Among soil parameters, organic matter and fulvic acids strongly correlate with caesium and plutonium isotopes, especially in the 0-10 cm layer. 137Cs and 239+240Pu are distributed rather similarly over the 0-10 cm and 10-20 cm layers. At locations with high contents of sand (82-93%) along the South China Sea coast, the downward percolation by rainwater results in a higher accumulation of 239+240Pu and 137Cs in the 10-20 cm layer. The mean 137Cs/ 90Sr inventory ratio is 9.3+/-2.2, and the correlation is weak between these isotopes.     

Integrated effects of applied pressure,time, and polymer doses on alum sludge dewatering behaviour

In this study, combinations of applied pressure, pressing time and polymer dose were examined in an air pressure plate apparatus to explore their integrated influence on the dewatering of an alum sludge. Results of the investigation demonstrated that dewatering can be enhanced by increases in pressure and time. However, a point is reached at which continued increases in pressure and time offer little benefit. The data also confirmed that polymer affects the rate of water release rather than the extent of dewatering. Increased rates of water release due to increasing polymer dose can be attributed to the aggregation of sludge particles by polymer addition. It was also evident in this study that the initial sludge depth has a major impact on the average cake moisture content at a given dewatering time. It was apparent that once the initial sludge thickness exceeds about 2 cm, the water release follows a fairly similar pattern, which can be represented by a simple empirical model.     

Simulating interactive effects of symbiotic nitrogen fixation, carbon dioxide elevation, and climatic change on legume growth

The underlying mechanisms of interaction between the symbiotic nitrogen-fixation process and main physiological processes, such as assimilation, nutrient allocation, and structural growth, as well as effects of nitrogen fixation on plant responses to global change, are important and still open to more investigation. Appropriate models have not been adequately developed. A dynamic ecophysiological model was developed in this study for a legume plant [Glycine max (L.) Merr.] growing in northern China. The model synthesized symbiotic nitrogen fixation and the main physiological processes under variable atmospheric CO2 concentration and climatic conditions, and emphasized the interactive effects of these processes on seasonal biomass dynamics of the plant. Experimental measurements of ecophysiological quantities obtained in a CO2 enrichment experiment on soybean plants, were used to parameterize and validate the model. The results indicated that the model simulated the experiments with reasonable accuracy. The R2 values between simulations and observations are 0.94, 0.95, and 0.86 for total biomass, green biomass, and nodule biomass, respectively. The simulations for various combinations of atmospheric CO2 concentration, precipitation, and temperature, with or without nitrogen fixation, showed that increasing atmospheric CO2 concentration, precipitation, and efficiency of nitrogen fixation all have positive effects on biomass accumulation. On the other hand, an increased temperature induced lower rates of biomass accumulation under semi-arid conditions. In general, factors with positive effects on plant growth tended to promote each other in the simulation range, except the relationship between CO2 concentration and climatic factors. Because of the enhanced water use efficiency with a higher CO2 concentration, more significant effects of CO2 concentration were associated with a worse (dryer and warmer in this study) climate.