7B04铝合金和30CrMnSiA钢短期腐蚀的电化学行为研究

目的研究7B04铝合金和30CrMnSiA合金钢试样的电化学性能。方法采用电化学实验、扫描电子显微镜(SEM)、腐蚀坑深度测试分别对7B04铝合金和30CrMnSiA合金钢试样在是否经过天然海水浸泡的情况下进行测试分析,得到微观腐蚀形貌和腐蚀坑深度以及试样表面不带锈和带锈时的电化学性能。结果随着Na Cl浓度增大,7B04铝合金和30CrMnSiA钢的自腐蚀电流变大,两者之间存在明显的电位差,接触后会发生电偶腐蚀。电偶电流与阴阳极面积比和Na Cl浓度有关,阴阳极面积比增大或Na Cl浓度升高均会导致电偶效应增强。经过海水短期浸泡后,7B04铝合金表面的锈层不仅没有起到抑制腐蚀的作用,反而使自腐蚀加重,但电偶效应确实有所减弱。结论沿海设备在使用过程中应竭力避免铝合金在锈层下工作。     

飞机用铝合金腐蚀行为和腐蚀预测研究现状及问题分析

针对不同的航空铝合金结构及部位,从腐蚀机理、腐蚀行为和腐蚀预测技术三方面较为系统地分析了研究现状及进展。在此基础上,明确了航空铝合金腐蚀预测技术需要进一步研究的问题,分别为飞机结构表面腐蚀环境的确定问题,材料在海洋大气环境下腐蚀电化学性能的准确测量问题,腐蚀预测模型的选取问题。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

石化特种设备管理现状及风险控制对策

为加强特种设备管理,提高风险控制水平,对中国特种设备的管理法规标准体系、中国石化特种设备管理现状及存在的问题,进行了讨论和思考,并提出了石化特种设备风险控制对策。     

发光细菌生物毒性抑制率优化研究

发光细菌生物毒对水生生态环境有极大的破坏作用,为保护水体环境,提出发光细菌生物毒性抑制率优化研究。完成测试样品调制;设置菌悬液特征参数,利用pH、RLU及D600进行同步检测,完成发光细菌生物毒性重现;分析磺胺类药品于根际土壤的形态分布和生态毒性,完成发光细菌生物毒性抑制率优化研究。实验证明,三种磺胺类药品对发光细菌生物毒性的相对抑制率都小于30%,为低毒性;其中有机溶剂对发光细菌生物毒性的抑制率最大,水溶态较大,结合态最小。     

旅游风景区大型体育赛事的环境保护措施研究

结合旅游风景区举办大型体育赛事对环境的危害性,从减少污染排放源、从源头治理污染、加大管理层的监管力度等三方面进行环境污染监控管理。采用统计分析方法对环保治理效果进行量化评估,分析旅游风景区举办大型体育赛事期间的空气污染指数、废弃物排放数量以及水质污染情况,结合分组样本检验方法进行环保措施的有效性评价,并根据实际情况制定最优的环保措施,实现对旅游风景区的全方面环境治理,确保举办体育赛事对旅游景区的生态环境污染影响降到最低。     

8-氨基喹啉-5-偶氮-对苯酚荧光光度法测定微量铬(Ⅵ)

在盐酸介质中,铬(Ⅵ)与AQAPOH形成可被氯仿萃取的荧光化合物,其λex/λem=295nm/400nm.线性范围为0-1.0μg Cr(Ⅵ)/25ml(水相),检测限为0.7μg/L.除Mn(Ⅶ)外,常见金属离子无干扰,可在数千倍Cr(Ⅲ)存在下测定废水中微量铬(Ⅵ).初步探讨了荧光反应的机理.     

Microbiological characteristics in a zero-valent iron reactive barrier

Zero-valent iron (Fe⁰)-based permeable reactive barriertreatment has been generating great interest for passivegroundwater remediation, yet few studies have paid particularattention to the microbial activity and characteristics withinand in the vicinity of the Fe⁰-barrier matrix. The presentstudy was undertaken to evaluate the microbial population andcommunity composition in the reducing zone of influence byFe⁰ corrosion in the barrier at the Oak Ridge Y-12 Plantsite. Both phospholipid fatty acids and DNA analyses were usedto determine the total microbial population and microbialfunctional groups, including sulfate-reducing bacteria,denitrifying bacteria, and methanogens, in groundwater andsoil/iron core samples. A diverse microbial community wasidentified in the strongly reducing Fe⁰ environment despitea relatively high pH condition within the Fe⁰ barrier (up topH 10). In comparison with those found in the backgroundsoil/groundwater samples, the enhanced microbial populationranged from 1 to 3 orders of magnitude and appeared to increase from upgradient of the barrier to downgradient soil. Inaddition, microbial community composition appeared to change overtime, and the bacterial types of microorganismsincreased consistently as the barrier aged. DNA analysisindicated the presence of sulfate-reducing and denitrifyingbacteria in the barrier and its surrounding soil. However, theactivity of methanogens was found to be relatively low,presumably as a result of the competition by sulfate/metal-reducing bacteria and denitrifying bacteria because of the unlimited availability of sulfate and nitrate in the site groundwater. Results of this study provide evidenceof a diverse microbial population within and in the vicinity ofthe iron barrier, although the important roles of microbial activity, either beneficially or detrimentally, on the longevityand enduring efficiency of the Fe⁰ barriers are yet to be evaluated.     

Determination of PAHs by On-Line Polarization Synchronous Fluorescence with HPLC

A novel analytical method has been established for on-line simultaneous determination of fluorene and acenaphthene,chrysene and benzo[a]anthracene (B[a]A) by polarization synchronous fluoromet.y (PSF) coupled to high performance liquid chromatography (HPLC). The detection limits were: 0.039, 0.046, 0.016 and 0.042 mgL-1 for fluorene, acenaphthene, chrysene and B[a]A, respectively. The proposed method has been successfisily applied to simultaneous determination of these PAHs in environmental air and marine sediment samples.     

Soil Lead and Other Metal Levels in Industrial, Residential and Nature Reserve Areas in Singapore

The use of pressure feedback microwave digestion technique has permitted rapid and efficient digestion of soil and sediment samples. The evaluation of different acid mixtures to digest soil samples were studied by mixed-level orthogonal array design. The selected acid mixture of HCl-HNO3-HF was employed in the survey of Pb, Zn, Cu, Cr and Mn in soil samples. Surface soil samples were collected from industrial, residential and nature reserve areas in Singapore. The five metal concentrations were determined by flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. The lead and other metal contents in NBS SRM 1645, NIES CRM No. 2 and NRCC BCSS-1 sediment standard references were determined concurrently with the survey samples. Five measured metal loading on the surface soils was in the order: industrial area > residential area > nature reserve area. The trace metal concentrations in surface soil from areas of heavy traffic are higher than those from residential areas. The main sources of trace metal pollution are vehicular exhaust and industrial activities.