Mercury and selenium levels in lemon sharks (Negaprion brevirostris) in relation to a harmful red tide event

Tissue levels of mercury (Hg; total, organic) and selenium (Se) were assessed in juvenile lemon sharks (Negaprion brevirostris) from Florida nearshore waters collected during a harmful algal bloom (HAB, brevetoxin) event and compared with sharks not exposed to HABs. In all sharks studied, total Hg levels in the muscle were generally present in a molar excess over Se (which may protect against Hg toxicity) and mean muscle Hg levels (0.34  $\upmu $ g/g) exceed safe human consumption guidelines. While there was generally no difference in tissue Hg and Se levels following exposure of sharks to HABs, hepatic Hg levels were significantly lower (56% reduction) in the HAB-exposed sharks compared to controls. As Hg and HABs are globally increasing in scope and magnitude, further work is warranted to assess their interactions and biotic impacts within aquatic ecosystems, especially for a species such as the lemon shark that is classified as a near-threatened species by the International Union for the Conservation of Nature.     

A survey of parabens in aquatic environments in Hanoi,Vietnam and its implications for human exposure and ecological risk

Environmental Science and Pollution Research - Seven parabens including methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), iso-propylparaben (iPrP), butylparaben (BuP), benzylparaben...     

Characterization of compaction and CBR properties of recycled concrete aggregates for unbound road base and subbase materials in Vietnam

Journal of Material Cycles and Waste Management - Mechanical properties of recycled concrete aggregates (RCA) such as compaction and California bearing ratio (CBR) are important for application as...     

Effect of biogeochemical interactions on bioaccessibility of arsenic in soils of a former smelter site in Republic of Korea

The total concentration-based regulations for soil remediation do not consider the possible changes in bioaccessibility of remaining arsenic (As) in soils due to biogeochemical interactions after remediation. This study used As-contaminated soil and pore water samples that were collected from the rice paddy and forest/farmland located in the vicinity of a former smelter site in Republic of Korea to elucidate the changes in As bioaccessibility due to biogeochemical interactions. Bioaccessibility and chemical forms of As in soils were determined by using an in vitro method and sequential extraction, respectively, and soil microbial community was evaluated. Bioaccessibility of As in the rice paddy soil samples was higher than that in the forest/farmland soil samples. This could be attributed to relatively higher dependence of bioaccessible As in the rice paddy soils on the soil concentration of iron (Fe), aluminum, or manganese, which could lead to greater changes in bioaccessible As via reductive dissolution. The strong linear relationship (R ² = 0.90, p value ≤0.001) between the pore water As and Fe concentrations, and the greater portion of bacterial species related to reductive dissolution of Fe oxides in the rice paddies can support the higher As bioaccessibility promoted by reductive dissolution. Therefore, it is necessary to consider the potential changes in the bioaccessible As due to biogeochemical interactions in remediation of As-contaminated soils, particularly when soils are likely to be reused under reductive dissolution-promoting conditions (e.g., flooded conditions).     

Optimal water quality monitoring network design for river systems

Typical tasks of a river monitoring network design include the selection of the water quality parameters, selection of sampling and measurement methods for these parameters, identification of the locations of sampling stations and determination of the sampling frequencies. These primary design considerations may require a variety of objectives, constraints and solutions. In this study we focus on the optimal river water quality monitoring network design aspect of the overall monitoring program and propose a novel methodology for the analysis of this problem. In the proposed analysis, the locations of sampling sites are determined such that the contaminant detection time is minimized for the river network while achieving maximum reliability for the monitoring system performance. Altamaha river system in the State of Georgia, USA is chosen as an example to demonstrate the proposed methodology. The results show that the proposed model can be effectively used for the optimal design of monitoring networks in river systems.     

Metabolites change of Scenedesmus obliquus exerted by AgNPs

With increasing emission of silver nanoparticles (AgNPs) into the environment, it is important to understand the effects of ambient concentration of AgNPs. The biological effects of AgNPs on Scenedesmus obliquus, a ubiquitous freshwater microalgae, was evaluated. AgNPs exerted a minor inhibitory effect at low doses. Non-targeted metabolomic studies were conducted to understand and analyze the effect of AgNPs on algal cells from a molecular perspective. During the 48?hr of exposure to AgNPs, 30 metabolites were identified, of which nine had significant changes compared to the control group. These include d-galactose, sucrose, and d-fructose. These carbohydrates are involved in the synthesis and repair of cell walls. Glycine, an important constituent amino acid of glutathione, increased with AgNP exposure concentration increasing, likely to counteract an increased intracellular oxidative stress. These results provide a new understanding of the toxicity effects and mechanism of AgNPs. These metabolites could be useful biomarkers for future research, employed in the early detection of environmental risk from AgNPs.     

Characterization of controlled-release KMnO4 (CRP) barrier system for groundwater remediation: a pilot-scale flow-tank study

Release and spreading of permanganate (MnO(4)(-)) in the well-based controlled-release potassium permanganate (KMnO(4)) barrier system (CRP system) was investigated by conducting column release tests, model simulations, soil oxidant demand (SOD) analyses, and pilot-scale flow-tank experiments. A large flow tank (L x W x D=8m x 4m x 3m) was constructed. Pilot-scale CRP pellets (OD x L=0.05 m x1.5m; n=110) were manufactured by mixing approximately 198 kg of KMnO(4) powders with paraffin wax and silica sands in cylindrical moulds. The CRP system (L x W x D=3m x 4m x 1.5m) comprising 110 delivery wells in three discrete barriers was constructed in the flow tank. Natural sands (organic carbon content=0.18%; SOD=3.7-11 g MnO(4)(-)kg(-1)) were used as porous media. Column release tests and model simulations indicated that the CRP system could continuously release MnO(4)(-) over several years, with slowly decreasing release rates of 2.5 kg d(-1) (day one), 109 g d(-1) (day 100), 58 g d(-1) (year one), 22 g d(-1) (year five), and 12 g d(-1) (year 10). Mean MnO(4)(-) concentrations within the CRP system ranged from 0.5 to 6 mg l(-1) during the 42 days of testing period. The continuously releasing MnO(4)(-) was gradually removed by SOD limiting the length of MnO(4)(-) zone in the porous media. These data suggested that the CRP system could create persistent and confined oxidation zone in the subsurface. Through development of advanced tools for describing agent transport and facilitating lateral agent spreading, the CRP system could provide new approach for long-term in situ treatment of contaminant plumes in groundwater.     

The effect of variability in industrial emissions on ozone formation in Houston, Texas

Ambient observations have indicated that high concentrations of ozone observed in the Houston/Galveston area are associated with plumes of highly reactive hydrocarbons, mixed with NO_x, from industrial facilities. Ambient observations and industrial process data, such as mass flow rates for industrial flares, indicate that the VOCs associated with these industrial emissions can have significant temporal variability. To characterize the effect of this variability in emissions on ozone formation in Houston, data were collected on the temporal variability of industrial emissions or emission surrogates (e.g., mass flow rates to flares). The observed emissions variability was then used to construct regionwide emission inventories with variable industrial emissions, and the impacts of the variability on ozone formation were examined for two types of meteorological conditions, both of which lead to high ozone concentrations in Houston. The air quality simulations indicate that variability in industrial emissions has the potential to cause increases and decreases of 10–52 ppb (13–316%), or more, in ozone concentration. The largest of these differences are restricted to regions of 10–20 km², but the variability also has the potential to increase regionwide maxima in ozone concentrations by up to 12 ppb.     

A high efficiency all glass sampling and concentration device for adsorptive semivolatile organics

A low-volume, inert sampling and enrichment device for semivolatile organic vapors is described. The device consists of two concentric fused silica capillaries. A small portion of the inter-capillary volume, cooled with a burst of compressed carbon dioxide, serves as a trap for the semivolatile organics. The low mass of the trap permits rapid sampling and desorption cycles suitable for applications requiring fast monitoring of semivolatile chemicals. The device is devoid of switching valves in the sampling train and consequently does not suffer from analyte loss due to irreversible adsorption or interference resulting from cross contamination. The device was successfully used for sampling low concentrations of highly adsorptive nitroaromatic compounds and is applicable for polychlorinated dibenzo-p-dioxins (PCDDs) and polyaromatic hydrocarbons (PAHs).