Screening of phthalic acid esters in raw materials,premixes and feed additives

Phthalates are animal carcinogens and may cause death or tissue deformities. Samples of feedstuffs collected in 2005 and 2006 from industrial feed manufacturers in the Czech Republic were analysed for contamination with phthalic acid esters (PAEs), specifically di-2-ethylhexyl phthalate (DEHP) and di-n-butyl phthalate (DBP). Samples of feed additives, premixes and raw materials were collected (year 2005, n = 26). For soybean oil, the total volume of phthalates measured (DBP + DEHP) reached a level of 131.42 mg kg⁻¹; for rapeseed oil, fish meal and animal fats, the levels measured were 15.00, 7.96 and 58.87 mg kg⁻¹, respectively. The lowest level of DBP + DEHP was found in corn (2.03 mg kg⁻¹). Since phthalates were detected, samples of feed additives (n = 28) and raw materials (n = 28) were collected again in 2006. The highest levels of DBP + DEHP were found in raw materials containing fat. Phthalate levels in rapeseed oil samples ranged from 1.38 to 32.40 mg kg⁻¹ DBP + DEHP. For feed additives, contamination levels in vitamins and amino acids ranged from 0.06 to 3.15 and 1.76 to 4.52 mg kg⁻¹ DBP + DEHP, respectively. Here, we show that the levels of PAEs found in cereals such as wheat, barley and corn may be regarded as being alarmingly high, because cereals make up the largest proportion of compound feed of farm animals.     

Evaluation of metabisulfite and a commercial steel wool for removing chromium(VI) from wastewater

Efficiency of metabisulfite and a commercial steel wool as reducing agents in the removal of Cr(VI) from wastewaters was evaluated. Chromium(VI) was converted to Cr(III), precipitated with NaOH, and removed by filtration. A reduction of more than 1.0 × 10⁵ and 4.0 × 10⁵ fold in total Cr and the Cr(VI) concentrations, respectively, was observed by employing steel wool masses as low as 0.4420 g to 30-mL solutions of wastewater. Chromium(III) hydroxide obtained after the treatment was recycled and used as marker in cattle nutrition studies. The liquid residue obtained after the treatment was reused as precipitation agent replacing NaOH.     

Removal of malachite green from water samples by cloud point extraction using Triton X-100 as non-ionic surfactant

A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing malachite green using Triton X-100 as non-ionic surfactant. The effects of the concentration of the surfactant, temperature and salt concentration on the different concentrations of dye have been studied and optimum conditions were obtained for the removal of malachite green. The concentration of malachite green in the dilute phase was measured using UV–Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of malachite green was very effective in the presence of NaCl as an electrolyte. The results showed that up to 500 ppm of malachite green can quantitatively be removed (>95%) by CPE procedure in a single extraction using optimum conditions.     

Photo-polymerization of triclosan in aqueous solution induced by ultraviolet radiation

The formation of 2,8-dichlorodibenzo-p-dioxin and other harmful degradation products in the photo-degradation process of triclosan is of increasing concern. Here we worked on the identification of polymerized products at high triclosan concentration and on the mechanism of photoreaction. Five dimmers and two trimers of triclosan were detected by liquid chromatography-mass spectrum analysis. 2,8-dichlorodibenzo-p-dioxin was also identified by comparing with an authentic standard. Relatively low pH and high concentration favored the polymerization of triclosan. Three main routes of photoreaction were postulated, namely dechlorination, ring closure and polymerization.     

Ethylenediamine-modified activated carbon for aqueous lead adsorption

This study is to develop a carbon-based adsorbent containing multiple functional ligands for effective removal of lead ions from aqueous media. Activated carbon was oxidized by nitric acid, followed by chlorination with thionyl chloride and reaction with ethylenediamine. Modified activated carbon (MAC) was characterized using scanning electron microscopy in conjunction of energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FT-IR), and potentiometric titration. Surface characterizations confirmed that carboxyl, amine, and chlorine functional groups were effectively introduced onto the carbon surface by the treatments. The modifications lowered the pH at the point of zero charge (pH_pzc) from 9.6 to 2.55 and resulted in more negatively charged surfaces. Adsorptive experiments showed that aqueous Pb removal by MAC was faster, with a 62% higher capacity than the original activated carbon (60.2 vs. 37.2 mg g⁻¹).     

Perception of people for the risk of Tianwan nuclear power plant

A questionnaire survey of residents’ risk perceptions related to Taiwan nuclear power plant in China was carried out to explore the determining factors that affect individual risk perception. This study proposed to pursue a more comprehensive understanding of factors that affected individual risk perception to nuclear power plants. Covariance structure analysis was conducted using risk perceptions of nuclear power as dependent variable and including interest and knowledge levels of nuclear power, acceptability, benefit perception, trust in nuclear power operation, and trust in government as independent variables. The use of the hypothesis of Elaboration likelihood model (ELM) was also proposed. The results showed that persons with higher levels of interest and knowledge of nuclear power had their own perceptions of risk closely associated with acceptability and potential benefits of nuclear power. In contrast, persons with no interest in and knowledge of nuclear power would have risk perceptions related to their trust in nuclear operation and the government, which partially supported the ELM hypothesis. All these results indicated that the government in China plays an important role in rational risk perceptions, and well-designed communication of risks will help the public to be involved in risk management and improve people’s rational acceptance of risk.     

Public perception of environmental issues across socioeconomic characteristics: A survey study inWujin,China

In developing countries, there is controversy over the correct perception regarding environmental and developmental issues. Few studies have examined the perception of low-income nationals in regards to social and environmental issues. This paper looks at the relationship between socio-demographic factors and the groups’ perceived priority regarding environmental and social issues in Wujin County. The results indicated that most residents, specifically the young, government employed and the urban community consider environmental issues to be serious, especially in relation to air pollution and water pollution. Furthermore, many residents feel it is important to rank environmental problems that are related to other social and economic issues, and that environmental protection must be set as a priority in Wujin County. Compared to social issues, environmental concern was greater among the young, government employed, and the urban community, because of their higher education and affluence. In addition, 66.2% of residents consider environmental protection to be more important than economic development. Thus, environmental protection must be set as a high priority in Wujin County, in order to face the many social and environmental challenges inherent in development.     

Nitrogen-retaining property of compost in an aerobic thermophilic composting reactor for the sanitary disposal of human feces

Aerobic composting is a method for the sanitary disposal of human feces as is used in bio-toilet systems. As the products of composting can be utilized as a fertilizer, it would be beneficial if the composting conditions could be more precisely controlled for the retention of fecal nitrogen as long as possible in the compost. In this study, batch experiments were conducted using a closed aerobic thermophilic composting reactor with sawdust as the bulk matrix to simulate the condition of a bio-toilet for the sanitary disposal of human feces. Attention was paid to the characteristics of nitrogen transformation. Under the controlled conditions of temperature at 60°C, moisture content at 60%,anda continuous air supply, more than 70% fecal organic removal was obtained, while merely 17% fecal nitrogen loss was observed over a two-week composting period. The nitrogen loss was found to occur mainly in the first 24 h with the rapid depletion of inorganic nitrogen but with an almost unchanged organic nitrogen content. The fecal NH₄-N which was the main component of the inorganic nitrogen ( > 90%) decreased rapidly in the first day, decreased at a slower rate over the following days, and finally disappeared entirely. The depletion of NH₄-N was accompanied by the accumulation of NH₃ gas in the ammonia absorber connected to the reactor. A mass balance between the exhausted NH₃ gas and the fecal NH₄-N content in the first 24 hours indicated that the conversion of ammonium into gaseous ammonia was the main reason for nitrogen loss. Thermophilic composting could be considered as a way to keep a high organic nitrogen content in the compost for better utilization as a fertilizer.     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Impact of solids on biphasic biodegradation of phenanthrene in the presence of hydroxypropyl-<Emphasis Type="Italic">β</Emphasis>-cyclodextrin (HPCD)

The consequence of polycyclic aromatic hydrocarbons (PAHs) in the environment is of great concern. The hydrophobic properties of PAHs significantly impact phase distribution causing limited bioavailability. Enhanced biodegradation has been extensively carried out by surfactants and the redeployment effect was recognized. However, the quantitative relationship concerning the impact of solids was rarely reported. A batch of biphasic tests were carried out by introducing Mycobacterium vanbaalenii PYR-1 and hydroxypropyl-β-cyclodextrin (HPCD) into a mixture of phenanthrene solution and various glass beads (GB37-63, GB105-125, and GB350-500). The comparative results demonstrated that HPCD had little effect on microbial growth and was not degradable by bacterium. A model was proposed to describe the biodegradation process. The regression results indicated that the partition coefficient k _d (1.234, 0.726 and 0.448 L·g^?1) and the degradation rate k (0 mmol·L^?1: 0.055, 0.094, and 0.112; 20 mmol·L^?1: 0.126, 0.141, and 0.156; 40 mmol·L^?1: 0.141, 0.156 and 0.184 d^?1) were positively and negatively correlated with the calculated total surface area (TSA) of solids, respectively. Degradation enhanced in the presence of HPCD, and the enhancing factor f was calculated (20 mmol·L^?1: 15.16, 40.01, and 145.5; 40 mmol·L^?1: 13.29, 37.97, and 138.4), indicating that the impact of solids was significant for the enhancement of biodegradation.