Sub-lethal exposure to ultraviolet radiation reduces prey consumption by Atlantic cod larvae (Gadus morhua)

Levels of ultraviolet-B radiation (UV-B: 280–315 nm) reaching the earth’s surface have increased over the past few decades due to ozone depletion. It is well documented that exposure to UV-B radiation increases mortality in marine fish larvae. However, few studies have examined sub-lethal effects of UV-B radiation such as, for example, the possibility that it affects prey consumption by fish larvae. Atlantic cod larvae were exposed to a sub-lethal level of ultraviolet-B radiation (UV-B: 280–315 nm) for 15 h. After the exposure, rotifers (4/mL) were fed to cod larvae at three different post-exposure intervals (20 min, 3 and 6 h). Trials were replicated three times for each post-exposure interval. The number of rotifers in the gut and the percent of empty guts (number of fish with empty gut/number of fish examined × 100) were analyzed. Results were compared to those of unexposed fish (the control treatment). UV-B exposed cod larvae had consumed significantly fewer rotifers than control fish at all post-exposure intervals. There was no significant difference in the frequency of empty guts between fish in the UV-B treatment versus fish in the control treatment at any of the post-exposure time points (although the difference at 20 min post-exposure was borderline significant). These observations suggest that cod larvae exposed to sub-lethal levels of UV-B have lower net energy gain which may lead to reduced growth rate and possibly poorer survival.     

Muscle tetanus and loading condition effects on the elastic and viscous characteristics of the thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G( infinity )) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

An assessment of global warming and biodiversity: CGE EMEDA analyses

Environmental Economics and Policy Studies - Genetic resources have been widely used for agricultural animal breeding, drug development, and biomaterials. Coherent assessments of global warming on...     

Separation and recovery of carbon dioxide by a membrane flash process

A novel process for carbon dioxide (CO₂) separation, which was named a membrane flash process, was developed to realize an energy-saving technology and to substitute it for a conventional regenerator. The electric energy for CO₂ recovery in a membrane flash process using aluminum oxide and diethanolamine was lower than the thermal energy of the conventional chemical absorption process. Flashing at elevated temperature by the low temperature energy significantly reduced the electric energy and required much less membrane area. This process has potentiality of low cost capture of CO₂ when the low temperature energy, which is not available for other purposes, can be utilized to elevate flashing temperature.     

Variation of dust layer height in the northern Taklimakan Desert in April 2002

LIDAR observations were conducted in the northern Taklimakan Desert to investigate the vertical distribution of dust in April 2002. During the observation period, a dust outbreak occurred on 13 April, remaining over the desert for several days. Despite only slight variations being observed in dust layer height before the dust event, marked diurnal variation in dust layer height was observed after the dust event. In this study, we conducted two numerical simulations to investigate differences in the variation exhibited by the dust layer heights before and after the dust event, and assessed the influence of meteorological conditions on this variation. The simulated results show that the clearly diurnal variation in dust layer height is strongly influenced by local circulation which is affected by the characteristic topography and synoptic conditions of the Tarim Basin.     

GIS aided prediction of CO2 emission dispersion from geothermal electricity production

CO₂ is the dominant constituent of non-condensable gases in the steam phase of most geothermal fluids. This paper attempts to present the results of a study conducted to develop prediction modeling of CO₂ dispersion in the surrounding atmosphere from a planned 50 MWe geothermal power plant prior to its production. Dispersion models are widely used for predicting future concentrations of environmental emissions on a range of geographic scales. The dispersion type for gases and their average removal rate depends on the meteorological conditions such as wind direction, wind speed, precipitation, atmospheric stability, and surface roughness and topography. Geographic Information System (GIS) capabilities were used for quality visualization of the model outputs and presenting an accurate numerical copy of the study area. The results by the prediction model show that the natural transfer of CO₂ will be from the power plant toward east and northeast and CO₂ concentration trends after the power plant utilization will be similar to the background conditions with minor changes. This dispersion test was carried out to validate and field test the GIS aided dispersion modeling approach described in the paper and the procedure may be applicable for other studies assessing the emission dispersion of pollutants from a point source.     

Electrolytic aminated carbon materials for the electrocatalytic redox reactions of inorganic and organic compounds

Some kinds of amine groups can be introduced to the glassy carbon surface by the electrode oxidation of the carbon electrode surface in ammonium carbamate solution, and this amine groups modified electrode is named as an aminated glassy carbon electrode. The existences of not only primary amine but also secondary and tertially amines were confirmed by X ray photoelectron spectroscopy. The applications of the aminated carbon material for the electrocatalytic reductions of oxygen, hydrogen peroxide, and organic compounds such as quinones were carried out, and the effects of amination on the formation of electrocatalytic sites for many species were revealed. The electrocatalyzed cyclic voltammograms of metal ions and metal chelate compounds obtained by aminated glassy carbon electrodes are also discussed. Moreover, we intend to describe that the aminated carbon electrode can exhibit the large reduction waves of inorganic oxoacids such as N0₂? or bromide ion. The introduced functional groups containing nitrogen atom can change the distribution of the electron densities of the graphite carbon surface, and this specific electron distribution environment may generate the various electrocatalytic activities.     

Seasonal variations of water column nutrients in the inner area of Ariake Bay, Japan: the role of muddy sediments

To investigate seasonal variations of nutrient distribution in the mudflat–shallow water system, we conducted field surveys once a month from August 2007 to July 2008 in the inner area of Ariake Bay (IAB), Japan. The NH₄ ⁺–N concentration of the water column increased in autumn because of the high NH₄ ⁺ release from the sediments, ranging from 850 to 3,001 μmol?m^?2?day^?1. The NO₃ ^?–N concentration was maximal in January, which was thought to be caused by NO₃ ^? release from the oxic sediments and by NO₃ ^? regeneration due to water column nitrification. The PO₄ ^3?–P concentration of the water column was high in summer–autumn due to the high PO₄ ^3? release from the reduced sediments, ranging from 22 to 164 μmol?m^?2?day^?1. We estimated the total amounts of DIN and PO₄ ^3?–P release (R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ , respectively) from the muddy sediment area of the IAB. In summer–autumn, R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ corresponded to about 47.7 % of DIN input and about 116.6 % of PO₄ ^3?–P input from the river, respectively. Thus, we concluded that the muddy sediments were an important source of nutrients for the water column of the IAB during summer–autumn. In addition, we found that phosphorus necessary for the growth of Porphyra (Porphyra yezoensis, Rhodophyceae) would be insufficient in the water column when phosphorus during the Porphyra aquaculture period is supplied only from the river. Therefore, the phosphorus release from the muddy sediments was thought to play an important role in the sustainable production of Porphyra in Ariake Bay.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests

An alkaline comet assay and a micronucleus test were carried out on erythrocytes of the European chub, Squalius cephalus L., collected in spring and autumn in 2005 and 2006 at three sampling sites in River Sava, near Zagreb, Croatia. The results of comet assay showed the lowest genotoxic influence at the least polluted site, while higher DNA damage was observed at the polluted sites. Although the basal levels of DNA damage were elevated, a clear gradation of DNA damage was found due to pollution intensity in all sampling periods. The lowest cytogenetic damage as revealed by the micronucleus test (MNT) was observed as well at the least polluted site. High variations in MN frequency were observed between sampling periods, although the number of micronucleated erythrocytes was consistently the highest one at the polluted site. The comet assay as a biomarker of genotoxic effect exhibited higher sensitivity in discriminating the genotoxic capacity of studied polluted sites while the MNT was less sensitive. However, both tests should be used together in biomonitoring studies because they can reveal different aspects of DNA damage; comet assay, the early event of genotoxic exposure, and MNT, its final result as a mutagenic potential.