Coupling effects of foam ceramics on the flame and shock wave of gas explosion

The coupling of gas explosion flame and shock wave is analyzed. In the gas explosion process, shock wave is affected by the flame directly, and shock wave also induces the flame. Inhibiting explosion can be achieved by the interference between the flame and shock wave propagation. If the coupling effects can be damaged, the adverse effects caused by the explosion should be mitigated and controlled. According to the structure characteristics of foam ceramics, the coupling effects mechanism of ceramic foam on gas explosion flame and shock wave is researched. When the explosion goes through the structure of foam ceramics, the flame can be quenched and the shock wave be attenuated. After the flame is quenched, the supply of precursor shock wave energy is cut off. Due to lack of energy supply, the destructive effects of blast wave will be reduced effectively. Coupling effects of the flame and shock wave can be damaged by the special structure of foam ceramics. Studies suggest that a certain function to represent the structure characteristics of foam ceramics must exist. For a certain material of foam ceramics, the sure porosity δ and the pore diameter d also can be get, which is the key to research and develop foam ceramic suppression technology of gas explosion.     

油品真实蒸汽压多元非线性回归

油品蒸气压是从事油品蒸发损耗研究、计算油品蒸发损耗量的重要参数,但是仅有美国石油学会给出的诺模图,给利用计算机来计算储罐蒸发损耗带来了很大困难.为了利用计算机来计算储罐的蒸发损耗,运用Excel中的回归功能,对原始数据进行必要的转换,进行了真实蒸气压的多元非线性回归,回归出了油品真实蒸气压计算公式.结果显示,回归的方程具有很高的精度,利用回归方程编制了计算软件,为储罐蒸发损耗计算提供帮助.     

管制员安全能力模型研究

为准确评价管制员安全能力,基于能力的定义和管制员工作职责,界定管制员安全能力的内涵;依据该内涵及其工作特性,建立由身体素质、业务素质和意识3个结构维度组成的管制员安全能力模型。其中,身体素质包括生理状况和心理状况;业务素质包括教育状况、培训状况、技能状况和经验状况;意识包括安全意识和工作意识。在各项指标性质差异较大情况下,利用功效系数法实现评价指标的标准化以减小误差,客观反映指标情况,同时采用G1-法和熵值法集成的主客观综合赋权法确定指标的权重,在一定程度上弥补主客观单一赋权的不足,最后通过逼近理想解排序法(TOPSIS)评价管制员安全能力。结果表明,按照从大到小排序对管制员安全能力的影响因素依次为意识、身体素质和业务素质。就对所论能力的影响而言,心理状况强于生理状况;技能状况强教育、培训和经验状况;安全意识对意识的影响大于工作意识。     

液化侧扩流场地桩基动力反应振动台试验数值模拟

针对已完成的振动台试验,采用OpenSees数值模拟计算平台,建立液化侧扩流场地群桩振动台试验数值模型。该模型中,采用线弹性梁柱单元模拟桩和挡墙,采用刚性连接单元和零长度单元模拟桩-土界面。自由水体通过施加节点孔压和节点力模拟。引入多屈服面塑性本构模拟饱和砂层,采用两相完全耦合的u—p形式模拟土体位移和孔压。通过对比振动台试验结果表明,建立的有限元数值模型能够可靠地再现砂层和桩基的动力响应,进而验证数值模型的可靠性。同时,针对两个代表性时刻,分析了桩-土体系的侧向变形响应。所采用的分析方法和相关结论也为同类桩-土体系数值模拟提供一般性分析方法和思路。     

Potential CO2 intrusion in near-surface environments: a review of current research approaches to geochemical processes

Environmental Geochemistry and Health - Carbon dioxide (CO2) capture and storage (CCS) plays a crucial role in reducing carbon emissions to the atmosphere. However, gas leakage from deep storage...     

Compositional data analysis and geochemical modeling of CO2–water–rock interactions in three provinces of Korea

Environmental Geochemistry and Health - The CO2-rich spring water (CSW) occurring naturally in three provinces, Kangwon (KW), Chungbuk (CB), and Gyeongbuk (GB) of South Korea was classified based...     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

The impact trilemma of energy prices,taxation, and population on industrial and residential greenhouse gas emissions in Europe

Environmental Science and Pollution Research - As a major source of pollution and the cause of climate change, greenhouse gas emissions are attracting the attention of scholars, policymakers, and...     

Nanoplastic occurrence,transformation and toxicity: a review

Environmental Chemistry Letters - Nanoplastics are emerging contaminants of concern for living organisms and ecosystems, yet nanoplastics are difficult to extract and analyse. Once released into...