基于GIS的太湖流域主要生态风险源危险度综合评价研究

以太湖流域主要生态风险源为评价对象,充分考虑多类型多等级风险源作用强度的差异性,构建了风险源危险度评价模型,并在此基础上依据风险源发生机率、强度及作用范围等建立了太湖流域洪涝、干旱、极端气象、土壤侵蚀及污染排放等主要生态风险源的危险度评价指标体系。在ArcGIS技术支持下,创建了太湖流域1 606个网格和24个县市的风险源危险度统计数据库,采用AHP权重法确定指标权重,运用叠加分析、空间分析等技术方法最终实现太湖流域单要素及综合生态风险源危险度的定量评价。结果表明流域内生态风险源的分布存在明显的空间分异规律。其中,高生态风险源危险区集中分布在环太湖北部一带,面积约占流域面积的1172%;较高危险区主要呈“西北 北 东北 东”半环状分布格局,所占面积约2452%,危险度较低的区域集中在流域西南部的苕溪流域一带,面积占1566%。此外,不同区域主导生态风险源组成亦不同,约599%的区域是以污染排放为主导生态风险源,主要分布在镇江 宜兴 长兴 安吉一线以东的地区;2545%的区域主导生态风险源为干旱,主要集中在镇江 宜兴 长兴 安吉一线以西;1244%的区域是以洪涝灾害为主导风险源,集中分布在湖州、宜兴等地;而以水土流失、极端气象灾害作为主导风险源地区相对较为分散,所占比例较小     

基于环境一号卫星高光谱数据的太湖富营养化遥感评价模型

采用环境一号卫星高光谱数据直接监测太湖富营养化状态的方法较多光谱影像监测有着更高的精度优势,对内陆水环境监测具有一定的意义。利用2009年4月地面实测高光谱数据模拟环境一号卫星星上数据,结合确定的太湖富营养化状态遥感评价的水质因子,构建富营养化状态评价模型,并采用实测数据和环境一号卫星高光谱影像数据对模型的精度和适用性进行验证。研究结果表明：（1）选用叶绿素a作为富营养化遥感监测的水质因子监测太湖富营养化状态与综合营养指数法相比,平均相对误差为597%;（2）采用模拟的环境一号卫星高光谱影像数据结合三波段模型与采用地面实测数据评价结果之间的相关系数r=0855,平均相对误差为919%;（3）结合环境一号卫星高光谱影像对2010年5月2日太湖进行富营养化监测评价,结果显示太湖水体整体成中营养状态,存在1129%的监测水域出现轻度富营养化状态     

面源磷负荷改进输出系数模型及其应用

传统的输出系数模型是模拟较大流域面源污染的有效手段,但它假设同一土地利用类型的输出系数相同,忽视了营养物径流和截留过程中其他流域特征对输出系数空间分布的影响,难以为流域分区管理提供依据。在传统输出系数模型基础上,引入产污因子（CI）和截留因子（RI）,校正地形、降雨、植被缓冲带对面源磷流失空间格局的影响。用改进输出系数模型模拟滇池流域面源磷负荷并将模拟结果应用于流域管理。结果表明,改进的输出系数模型能更好地模拟面源磷污染的空间格局,识别出面源总磷的关键风险区--湖滨平原地带以及与入滇河流邻近的山谷、台地。以2008年滇池流域面源总磷的模拟结果（3525 t）为基准,若单位面积磷肥施用量减少20%,面源总磷负荷将减少86%;若环湖公路内侧全部实现退耕还林或还草,面源总磷负荷将减少60%;若同时实施减少磷肥施用量和环湖公路内退耕两项措施,面源总磷负荷将减少130%     

絮凝#x02014;微波辐射#x02014;Fenton试剂氧化法深度处理焦化废水

用絮凝#x02014;微波辐射#x02014;Fenton试剂氧化法深度处理焦化废水,研究了微波辐射时间、微波功率、FeSO₄加入量、H₂O₂加入量和废水pH对废水处理效果的影响。实验结果表明：在聚合氯化铝加入量为350mg/L、聚丙烯酰胺加入量为12mg/L、废水pH=5、FeSO₄加入量为250mg/L、H₂O₂总加入量为1400mg/L、H₂O₂分3次投加、微波功率为400W、微波辐射时间为60min的条件下,处理后出水的浊度、色度和COD去除率分别为98.59%,97.62%,86.21%。处理后出水澄清透明,COD为50.34mg/L,满足GB50050#x02014;2007《工业循环冷却水处理设计规范》的要求。     

废旧纺织品的回收及再利用

随着人民生活水平的不断提高,居民家中淘汰的各类废旧纺织品的产生量快速增加。废旧纺织品作为一种可再生资源,其复杂性影响了回收后的资源化利用。废旧纺织品分类回收和再生纤维加工,提高了废旧纺织品回收及再利用水平,有助于弥补我国纺织原材料供给不足,实现织物资源的循环利用。     

一种包埋微生物复合填料的制备及性能评价

采用包埋法制备出一种复合生物填料,测其各项理化性质,并以NO。模拟废气验证其脱硝性能。填料主要由碳酸钙、牛粪堆肥腐殖质、菌剂载体、水泥、轻质珍珠岩、立体网状纤维及脱硝功能微生物等复合而成,粒径书12mm×20mm,自然堆积密度（471±0．8）kg／m2,持水量（49±1．3）％,比表面积3．91m2／g,平均机械强度（427．3±0．2）N,pH为10．5-0．2。填料能长期在潮湿环境中保持良好的粘结强度,并具有营养缓释及pH缓冲能力。包埋脱硝功能微生物复合填料中初期微生物数量5．3×10^5 CFU／g,运行60d后微生物数量达到8．6×10 8 CFU／g,闲置停运30d微生物有所减少,但重启后净化效率基本不变。当进气负荷低于I878mg／（13m3·h）,气体停留时间为14．47s时,BF,的去除率高达93．15％。     

电催化氧化处理除草剂异噁草酮废水的效能

为有效处理含异噁草酮除草剂废水,以Sb掺杂Ti／SnO2电极为阳极,不锈钢板为阴极,采用电催化氧化技术对异噁草酮废水进行降解,研究了不同影响因素对异噁草酮去除率的影响,并分析了异噁草酮的降解效果。结果表明,当异噁草酮初始浓度为100mg／L、电流密度为20mA／cm2、电解质投加量为0．10mol／L,反应120min后,异噁草酮去除率达到94％,此时TOC去除率为57．9％,能耗为25kWh／m2,且废水的可生化性能显著提高。     

Direct N2O decomposition over La2NiO4-based perovskite-type oxides

Direct decomposition of N₂O by perovskite-structure catalysts including La₂NiO₄, LaSrNiO₄, and La_0.7Ce_0.3SrNiO₄ was investigated. The catalysts were prepared by the Pechini method and characterized by x-ray diffraction (XRD), BET, scanning electron microscopy (SEM), and O₂-TPD. Experimental results indicate that the properties of La₂NiO₄ are significantly improved by partially substituting La with Sr and Ce. N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ are 44 and 36%, respectively, at 400ºC. As the temperature was increased to 600ºC, N₂O decomposition efficiency achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ reached 100% at an inlet N₂O concentration of 1,000 ppm, while the space velocity was fixed at 8,000 hr^?1. In addition, effects of various parameters including oxygen, water vapor, and space velocity were also explored. The results indicate that N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ are not significantly affected as space velocity is increased from 8,000 to 20,000 hr^?1, while La_0.7Ce_0.3SrNiO₄ shows better tolerance for O₂ and H₂O_(g). On the other hand, N₂ yield with LaSrNiO₄ as catalyst can be significantly improved by doping Ce. At a gas hour space velocity of 8,000 hr^?1, and a temperature of 600ºC, high N₂O decomposition efficiency and N₂ yield were maintained throughout the durability test of 60 hr, indicating the long-term stability of La_0.7Ce_0.3SrNiO₄ for N₂O decomposition.

Implications:Nitrous oxide (N₂O) not only has a high global warming potential (GWP₁₀₀ = 310), but also potentially destroys ozone in the stratosphere. Pervoskite-type catalysts including La₂NiO₄, LaSrNiO₄, and La_0.7Ce_0.3SrNiO₄ are applied for direct N₂O decomposition. The results show that N₂O decomposition can be enhanced as Sr and Ce are doped into La₂NiO₄. At 600ºC, N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ reach 100%, demonstrating high activity and good potential for direct N₂O decomposition. Effects of O₂ and H₂O_(g) contents on catalytic activities are also evaluated and discussed.     

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust

Water-emulsified diesel has proven itself as a technically sufficient improvement fuel to improve diesel engine fuel combustion emissions and engine performance. However, it has seldom been used in light-duty diesel engines. Therefore, this paper focuses on an investigation into the thermal efficiency and pollution emission analysis of a light-duty diesel engine generator fueled with different water content emulsified diesel fuels (WD, including WD-0, WD-5, WD-10, and WD-15). In this study, nitric oxide, carbon monoxide, hydrocarbons, and carbon dioxide were analyzed by a vehicle emission gas analyzer, and the particle size and number concentration were measured by an electrical low-pressure impactor. In addition, engine loading and fuel consumption were also measured to calculate the thermal efficiency. Measurement results suggested that water-emulsified diesel was useful to improve the thermal efficiency and the exhaust emission of a diesel engine. Obviously, the thermal efficiency was increased about 1.2 to 19.9%. In addition, water-emulsified diesel leads to a significant reduction of nitric oxide emission (less by about 18.3 to 45.4%). However, the particle number concentration emission might be increased if the loading of the generator becomes lower than or equal to 1800 W. In addition, exhaust particle size distributions were shifted toward larger particles at high loading. The consequence of this research proposed that the water-emulsified diesel was useful to improve the engine performance and some of exhaust emissions, especially the NO emission reduction.

Implications:The accumulated test results provide a good basis to resolve the corresponding pollutants emitted from a light-duty diesel engine generator. By measuring and analyzing transforms of exhaust pollutant from this engine generator, the effects of water-emulsified diesel fuel and loading on emission characteristics might be more clear. Understanding reduction of pollutant emissions during the use of water-emulsified diesel helps improve the effectiveness of the testing program. The analyzed consequences provide useful information to the government for setting policies to curb pollutant emissions from a light-duty diesel engine generator more effectively.     

Ni2 +对活性污泥活性及群落多样性的影响简

通过检测活性污泥的电子传递体系活性以及生物多样性,研究Ni²⁺对活性污泥微生物活性及群落多样性的影响。结果表明：与对照系统相比,5 mg/L的Ni²⁺对2,3,5-triphenylteltrazolium chloride（TTC-ETS）活性未产生显著的影响;但当Ni²⁺的浓度进一步增大到10、20和40 mg/L后,其对序批式反应器内活性污泥TTC-ETS活性的抑制率分别达到（36.79±11.14）%、（55.88±13.90）%和（70.97±6.78）%。低浓度Ni²⁺能增强活性污泥微生物对碳源的利用,但高于10 mg/L的Ni²⁺则显著抑制了活性污泥微生物对碳源的利用。各个SBR系统中微生物群落最常见的物种相近,物种丰富度和均一性则均有所不同,其中群落物种丰富度随着Ni²⁺浓度的增加而逐渐减小。TTC-ETS活性、平均每孔颜色变化率、Shannon指数和Simpson指数,与Ni²⁺的胁迫浓度之间的显著相关性表明,它们均可有效地表征Ni²⁺胁迫对活性污泥微生物活性及群落多样性的影响程度。