Radon in indoor air of primary schools: determinant factors,their variability and effective dose

Radon is a radioactive gas, abundant in granitic areas, such as in the city of Porto at the north-east of Portugal. This gas is a recognized carcinogenic agent, being appointed by the World Health Organization as the leading cause of lung cancer after smoking. The aim of this preliminary survey was to determine indoor radon concentrations in public primary schools, to analyse the main factors influencing their indoor concentration levels and to estimate the effective dose in students and teachers in primary schools. Radon concentrations were measured in 45 classrooms from 13 public primary schools located in Porto, using CR-39 passive radon detectors for about 2-month period. In all schools, radon concentrations ranged from 56 to 889 Bq/m³ (mean = 197 Bq/m³). The results showed that the limit of 100 Bq/m³ established by WHO IAQ guidelines was exceeded in 92 % of the measurements, as well as 8 % of the measurements exceeded the limit of 400 Bq/m³ established by the national legislation. Moreover, the mean annual effective dose was calculated as 1.25 mSv/y (ranging between 0.58 and 3.07 mSv/y), which is below the action level (3–10 mSv). The considerable variability of radon concentration observed between and within floors indicates a need to monitor concentrations in several rooms for each floor. A single radon detector for each room can be used, provided that the measurement error is considerably lower than variability of radon concentration between rooms. The results of the present survey will provide useful baseline data for adopting safety measures and dealing effectively with radiation emergencies. In particular, radon remediation techniques should be used in buildings located in the highest radon risk areas of Portugal. The results obtained in the current study concerning radon levels and their variations will be useful to optimize the design of future research surveys.     

Simulations of the flow in the Mahakam river–lake–delta system,Indonesia

Large rivers often present a river–lake–delta system, with a wide range of temporal and spatial scales of the flow due to the combined effects of human activities and various natural factors, e.g., river discharge, tides, climatic variability, droughts, floods. Numerical models that allow for simulating the flow in these river–lake–delta systems are essential to study them and predict their evolution under the impact of various forcings. This is because they provide information that cannot be easily measured with sufficient temporal and spatial detail. In this study, we combine one-dimensional sectional-averaged (1D) and two-dimensional depth-averaged (2D) models, in the framework of the finite element model SLIM, to simulate the flow in the Mahakam river–lake–delta system (Indonesia). The 1D model representing the Mahakam River and four tributaries is coupled to the 2D unstructured mesh model implemented on the Mahakam Delta, the adjacent Makassar Strait, and three lakes in the central part of the river catchment. Using observations of water elevation at five stations, the bottom friction for river and tributaries, lakes, delta, and adjacent coastal zone is calibrated. Next, the model is validated using another period of observations of water elevation, flow velocity, and water discharge at various stations. Several criteria are implemented to assess the quality of the simulations, and a good agreement between simulations and observations is achieved in both calibration and validation stages. Different aspects of the flow, i.e., the division of water at two bifurcations in the delta, the effects of the lakes on the flow in the lower part of the system, the area of tidal propagation, are also quantified and discussed.     

利用大型土柱自然淋溶条件下研究土壤重金属的迁移及形态转化

为研究不同重金属在土壤中的迁移和形态转化,通过分层填装土柱,在土柱0~5 cm深度范围内添加Pb、Ag、Bi、In、Sb和Sn等重金属污染土壤,并在自然条件下淋溶4 a,分析各重金属在红壤、潮土、黑土和砂土中的迁移速率及其形态组成. 结果表明:①在>30 cm深度范围内,红壤、潮土和黑土中各重金属质量分数与其相应本底值相比变化不大;与试验前土壤相比,砂土整个剖面中6种重金属质量分数均较高. ②6种重金属在4种土壤中的残留率表现为砂土<潮土<黑土<红壤;对于0～10 cm土壤中Pb的残留率,在潮土中大于Ag和Sb,在黑土中大于Ag,在红壤中大于In,在砂土中则大于Sn. ③模拟试验后残留在土柱中的重金属主要分布在土壤表层(0～30 cm),而深层(>30 cm)较少;6种重金属在红壤、潮土、黑土和砂土中的残留率平均值分别为98.0%、65.1%、65.9%和56.5%. ④与添加污染土壤之前相比,试验后土壤中残渣态等稳定形态重金属质量分数较低,其中Pb、In和Sb均以碳酸盐结合态和有机金属络合态为主,Ag和Sn分别以有机金属络合态、双氧水可提取有机结合态和有机金属络合态、无定形铁锰氧化物结合态为主,而Bi则以碳酸盐结合态和双氧水可提取有机结合态为主. 结果显示,红壤中Pb的迁移风险较低,潮土和黑土中Ag、Sb的迁移风险较高,而砂土中Sn和Sb的迁移风险需要格外关注.      

Sustainable development in the BRICS countries: an efficiency analysis by data envelopment

There is much concern about the social and environmental impacts caused by the economic growth of nations. Thus, to evaluate the socio-economic performance of nations, economists have increasingly addressed matters related to social welfare and the environment. It is within the scope of this context that this work discusses the performance of countries in the BRICS group regarding sustainable development. The objective of this study regards evaluating the efficiency of these countries in transforming productive resources and technological innovation into sustainable development. The proposed objective was achieved by using econometric tools as well as the data envelopment analysis method to then create economic, environmental, and social efficiency rankings for the BRICS countries, which enabled to carry out comparative analyses on the sustainable development of those countries. The results of such assessments can be of interest for more specific scientific explorations.     

Metals in the sediment and liver of four fish species from different trophic levels in Tisza River,Serbia

In aquatic environments metals originate from various natural and anthropogenic sources. The degree of contamination in fish tissues depends on the pollutant, fish species, their mode of feeding, sampling site and trophic level. This study presents concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, Sr and Zn in sediment and liver of four ecologically different fish species: piscivorous northern pike (Esox lucius L.), benthivorous sterlet (Acipenser ruthenus L.) and silver bream (Brama brama L.), and omnivorous common carp (Cyprinus carpio L.). Fish were caught at four sites along the stretch of the River Tisza in Serbia during October 2010. The concentrations of metals have been assessed using the inductively coupled plasma – optical emission spectrometry. Results revealed that metals with the highest values in sediment and fish samples were Al and Fe, respectively and sometimes concentrations of Zn are in the same order of magnitude as Fe concentrations. The highest concentration of metals was recorded in omnivorous common carp.     

Quantifying the effect of wind on internal wave resonance in Lake Villarrica,Chile

Lake Villarrica, located in south central Chile, has a maximum depth of 167 m and a maximum fetch of about 20 km. The lake is monomictic, with a seasonal thermocline located at a depth of approximately 20 m. Field data show the presence of basin-scale internal waves that are forced by daily winds and affected by Coriolis acceleration. A modal linear and non-linear analysis of internal waves has been used, assuming a two-layer system. The numerical simulations show good agreement with the internal wave field observations. The obtained modes were used to study the energy dissipation within the system, which is necessary to control the amplitude growth. Field data and numerical simulations identify (1) the occurrence of a horizontal mode 1 Kelvin wave, with a period of about a day that coincides with the frequency of daily winds, suggesting that this mode of the Kelvin waves is in a resonant state (subject to damping and controlled by frictional effects in the field) and (2) the presence of higher-frequency internal waves, which are excited by non-linear interactions between basin-scale internal waves. The non-linear simulation indicates that only 10 % of the dissipation rate of the Kelvin wave is because of bottom friction, while the rest 90 % represents the energy that is radiated from the Kelvin wave to other modes. Also, this study shows that modes with periods between 5 and 8 h are excited by non-linear interactions between the fundamental Kelvin wave and horizontal Poincaré-type waves. A laboratory study of the resonant interaction between a periodic forcing and the internal wave field response has also been performed, confirming the resonance for the horizontal mode 1 Kelvin wave.     

Layer-by-Layer Deposition of Antibacterial Polyelectrolytes on Cotton Fibres

The introduction of molecules with biological properties on textile materials is essential for a number of biotechnological applications. With the purpose of testing new processes applied to textiles, in this study, we present the first results on the feasibility of using the Layer-by-Layer (LbL) deposition process in natural fibers such as cotton, with natural polyelectrolytes like chitosan (CH) and alginic acid sodium salt (ALG), the durability of CH/ALG multilayer on cotton were evaluated. The increase of negative charges to the substrate cotton was made with NaBr and TEMPO, to ensure the success of the process of LbL. Three characterization methods to assess electrostatic LbL deposition were performed: the contact angle between a liquid (water) and the sample surface, in order to characterize the wettability of the samples with the different layers of CH and ALG; dyeing of the CH/ALG assembled cotton fabric with cationic methylene blue that shows regular changes in terms of color depth (K/S value), which indicate that the surface were alternately deposited with CH and ALG layers and, finally, the analysis by infrared spectroscopy using Fourier Transform with Attenuated Total Reflection (ATR-FTIR), to assess the changes in the interaction between CH and ALG deposited on cotton samples.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Urinary level of homovanillic acid and mercury in autistic children

Catecholamines and their metabolites affect children's nervous system. Dopamine is an important neurotransmitter in the brain. In the routine analysis for diagnostics of diseases, the dopamine metabolite homovanillic acid (HVA) is determined. Mercury is a neurotoxic agent and can cause different undesirable effects on the brain. In the present work a putative correlation between HVA, the main metabolite of dopamine, and mercury in urine of healthy and autistic children was studied. The level of HVA was higher in the urine of autistic children (14.5 ± 8.3 mg L^?1) compared to generally healthy children (4.4 ± 0.5 mg L^?1). The level of mercury in the urine of autistic children was lower (0.36 ± 0.24 µg L^?1) than in the urine of healthy children (2.1 ± 1.0 µg L^?1) showing that there is no correlation between HVA and mercury.