Assessment of multiple anthropogenic contaminants and their potential genotoxicity in the aquatic environment of Plitvice Lakes National Park,Croatia

In this study, the influence of anthropogenic pollution on the aquatic environment of Plitvice Lakes National Park (PLNP) was investigated during 2011–2012 using a combination of chemical and cytogenetic analyses. Four groups of major contaminants [(volatile organic compounds: benzene, toluene, ethylbenzene, and xylenes (BTEX); persistent organochlorine pollutants: organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs); major and trace elements; anthropogenic radionuclides (⁹⁰Sr, ¹³⁴Cs, and ¹³⁷Cs)] were determined in three aquatic compartments (water, sediment, fish). Mass fractions of inorganic constituents in different compartments reflected the geological background of the area, indicating their origin from predominantly natural sources. Levels of volatile and persistent organic compounds in water and fish, respectively, were very low, at levels typical for remote pristine areas. Analysis of anthropogenic radionuclides in water and sediment revealed elevated activity concentrations of ¹³⁷Cs in water, and measurable ¹³⁴Cs in the upper sediment layers from April 2011, possibly as a consequence of the Fukushima nuclear accident in March 2011. The potential genotoxicity of river and lake water and lake sediment was assessed under laboratory conditions using the alkaline comet assay on human peripheral blood lymphocytes, and measured levels of primary DNA damage were within acceptable boundaries. The results showed that despite the protected status of the park, anthropogenic impact exists in both its terrestrial and aquatic components. Although contaminant levels were low, further monitoring is recommended to make sure that they will not rise and cause potentially hazardous anthropogenic impacts.     

Simultaneous determination of iprodione,procymidone, and chlorflurenol in lake water and wastewater matrices by GC-MS after multivariate optimization of binary dispersive liquid-liquid microextraction

This study reports the optimization of a binary dispersive liquid-liquid microextraction method for the determination of iprodione, procymidone, and chlorflurenol by gas chromatography mass spectrometry. The study was aimed at using two extraction solvents to increase the extraction efficiency of all analytes. The binary solvents recorded results higher than the mono-solvents. After examining the effects of main experimental parameters and their interactions by analysis of variance, 200 μL of binary mixture (dichloromethane and 1,2-dichloroethane), 2.5 mL of ethanol, and 15 s vortex were obtained as optimum parameters. The detection and quantification limits calculated for the analytes were found to be between 0.30–1.6 and 1.0–5.3 ng/mL, respectively. Enhancement in detection power calculated as a ratio of the binary extraction detection limit to the detection limit of direct GC-MS analysis was 105-, 214-, and 233-fold for chlorflurenol, iprodione, and procymidone, respectively. In order to check the accuracy of the developed method, recovery study was performed. Water sampled from a lake and two wastewater samples from treatment facilities were spiked at two concentrations, and the percent recovery calculated for the samples ranged between 87 and 116%. These results confirmed the suitability of the method to real samples for accurate determination of the analytes at trace levels.     

Odor dispersion modeling with CALPUFF: Case study of a waste and residue treatment incineration and utilization plant in Kocaeli,Turkey

This study addresses the odor problem at a waste and residue treatment incineration and utilization plant located within the borders the Alikahya district of the Kocaeli province in Turkey. In the first stage of the study, odor measurements were made at designated sampling points, while in the second stage, odor concentrations were determined at the receptor points through dispersion modelling using a USEPA (United States Environmental Protection Agency) certified long-range (>50 km) CALPUFF lagrangian puff model. In the final stage, an analysis of the predicted and observed values was carried out using such statistical methods as geometric mean bias (MG), geometric variance (VG) and fractions of predictions within a factor of two observations (FAC2).

During the modelling study, the highest one-hour concentration level was found to be 1868.10 OU (Odor Units), and the 24-hour concentration level was found to be 1316 OU, representing a decrease of approximately 30 percent. According to the measurement made, the maximum concentration value was 2455 OU. Odor measurements were carried out at 13 points within the area in order to assess the prediction results. When the results were assessed using the MG, VG and FAC2 statistical methods, it was observed that an acceptable model performance was not achieved for the whole sampling point. When the reason for this was investigated, it was concluded that the observed values were lower than the predicted values due to the fact on the measurement days, the odor was dispersed by wind. It was further concluded that the observed values were higher than the predicted values as a result of odors emitted by other plants in the area. When the measurements in residential areas were examined to identify the effect of the odors, it was determined that although the primary density of settlement is to the southwest of the plant, it was not this area that was affected most, but rather the area to the northeast, where there is a lower settlement density.     

Throughfall,stemflow, and interception characteristics of coniferous forest ecosystems in the western black sea region of Turkey (Daday example)

This study aims to identify precipitation, throughfall, stemflow, precipitation, and interception processes in pure black pine, pure Scots pine, and mixed black pine–Scots pine forest ecosystems and present the precipitation partitioning according to different stand types. Throughfall and stemflow measurements were performed using five standard precipitation gauges in a pilot area established to represent pure black pine, pure Scots pine, and mixed black pine–Scots pine stands in the Bezirgan Basin. The total precipitation was measured in an open field close to the study area. Throughfall values were calculated as the percentage of precipitation measured in an open field. According to the results of the study, the throughfall values were 69.8% in black pine, 73.9% in Scots pine, and 77.7% in the mixed black pine–Scots pine stands; the stemflow values were 2.6% in black pine, 5.9% in Scots pine, and 3.1% in the mixed black pine–Scots pine stands; the amounts of precipitation reaching the forest floor were 72.3% in black pine, 79.8% in Scots pine, and 80.7% in the mixed black pine–Scots pine stands; and the interception values were found to be 27.7% in black pine, 20.2% in Scots pine, and 19.2% in the mixed black pine–Scots pine stands.     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.     

The reuse of reclaimed water for irrigation around the Mediterranean Rim: a step towards a more virtuous cycle?

Regional Environmental Change - Climate change and a growing population around the Mediterranean Rim are increasing the need for water and, consequently, the pressure on resources in terms of both...     

Resistance in bacteria and indirect beta-lactamase detection in E. coli isolated from Culex pipiens detected by matrix-assisted laser desorption ionization time of flight mass spectrometry

The aim of this study was detections of antibiotic resistance and resistance mechanism in bacteria isolated from mosquitos (Culex pipiens) living near humans. Therefore, antibiotic resistance in bacteria isolated from Culex pipiens was investigated by disk diffusion test and MIC E-test in this study. MALDI-TOF mass spectrometry was used for detection of resistant mechanism. In this study, hydrolytic breakdown products after a few hours of incubation of the bacteria isolated from Culex pipiens were detected. Results show that enzymatic destruction of ampicillin by beta-lactamases is able to be detected by MALDI-TOF mass spectrometry from wild strains of potential pathogens. The MALDI-TOF mass spectrometry is useful method for routine detection of beta-lactamases resistant mechanism, but overnight incubation of pure culture is necessary. The results are important for proper and fast intervention to limit the spread of beta-lactamase-producing wild bacteria and provide information for appropriate initial therapy of the infections caused by these microbes.     

Multi-class determination of pharmaceuticals in wastewaters by solid-phase extraction and liquid chromatography tandem mass spectrometry with matrix effect study

Environmental Science and Pollution Research - In this work, a multi-class analytical method for determination of 22 frequently used pharmaceuticals was developed and validated. Analytes were from...     

Tributyltin chloride disrupts aortic vascular reactivity and increases reactive oxygen species production in female rats

Environmental Science and Pollution Research - Organotin compounds, such as tributyltin (TBT), are environment contaminants that induce bioaccumulation and have potential toxic effects on marine...     

Revisiting nitrous acid (HONO) emission from on-road vehicles: A tunnel study with a mixed fleet

Nitrous acid (HONO) is an important precursor of OH radicals in the atmosphere. In urban areas, emissions from vehicles are the main source of air pollutants, including reactive nitrogen. Previously reported emission ratios of HONO (HONO/NO_x) from vehicles were measured in the late 1990s and need to be updated due to the significant changes in emission control technologies. We measured the emission ratio of a fleet of vehicles (38% diesel on average) from March 11 to 21, 2015, in a road tunnel in Hong Kong. The emission ratio of 1.24% (±0.35%) obtained is greater than the commonly adopted 0.8% or 0.3%. The elevated emission ratio is found to be related to the presence of vehicles equipped with diesel particle filters (DPFs). Positive correlation between HONO and black carbon (BC) shows that HONO and BC were emitted together, while the lack of correlation or even anticorrelation between HONO/NO_x and BC indicates that the BC-mediated conversion of NO₂ to HONO in the dark was insignificant in the immediate vicinity of the emission sources.

Implications: Vehicular emission is a key source for HONO in the urban atmosphere. However, the most commonly used emission ratio HONO/NO_x in modeling studies was measured more than 15 years ago. Our tunnel study suggests that a mixed fleet nowadays has a higher emission ratio, possibly because of the diesel particle filter (DPF) retrofit program and the growing share of Euro IV or more advanced diesel vehicles. Our study also provides new insight into the role of black carbon in HONO formation from vehicles.