Genetic relationship between offspring and guardian adults of a rhacophorid frog and its care effort in response to paternal share

The rhacophorid frog, Kurixalus eiffingeri, is one of only a few frog species that exhibits polyandry and paternal care of eggs. Previous studies predicted that multiple paternity within an egg clutch could influence the degree of paternal care and reproductive strategies. We used microsatellite DNA markers to assess the prevalence of multiple paternity within egg clutches and the relationship between male paternal care and the percent of male’s genetic contribution to the clutch, i.e., paternal share. We conducted field observations of paternal care and collected tissues from both male frogs and tadpoles for parentage analyses. Our results showed that at least five out of 31 egg clutches had multiple paternity. Attending males were always the genetic fathers of some, if not all of the eggs in the clutch they guarded. All egg clutches except one were attended by one male frog but the attending male did not necessarily sire the majority of offspring. Multiple paternity in all cases consisted of two fathers and one mother and most likely resulted from synchronous polyandry. Paternal care effort correlated significantly with the male’s genetic contribution to the clutch, suggesting that male frogs adjust the effort expended in care in response to paternal share. In addition, our results suggest that externally fertilizing species with parental care and multiple paternity may develop novel reproductive and behavioral strategies to safeguard their parental investment and overcome sperm competition.     

Leaf ontogeny interacts with Bt modification to affect innate resistance in GM aspens

Bioassays with a non-target slug (Deroceras spp.) and chemical analyses were conducted using leaf tissue from already existing genetically modified insect-resistant aspen trees to examine whether genetic modifications to produce Bacillus thuringiensis (Bt) toxins could affect plant phytochemistry, which in turn might influence plant–herbivore interactions. Three major patterns emerged. First, two independent modifications for Bt resistance affected the phytochemical profiles of leaves such that both were different from the isogenic wild-type (Wt) control leaves, but also different from each other. Among the contributors to these differences are substances with a presumed involvement in resistance, such as salicortin and soluble condensed tannins. Second, bioassays with one Bt line suggest that the modification somehow affected innate resistance (“Innate” is used here in opposition to the “acquired” Bt resistance) in ways such that slugs preferred Bt over Wt leaves. Third, the preference test suggests that the innate resistance in Bt relative to Wt plants may not be uniformly expressed throughout the whole plant and that leaf ontogeny interacts with the modification to affect resistance. This was manifested through an ontogenetic determined increase in leaf consumption that was more than four times higher in Bt compared to Wt leaves. Our result are of principal importance, as these indicate that genetic modifications can affect innate resistance and thus non-target herbivores in ways that may have commercial and/or environmental consequences. The finding of a modification–ontogeny interaction effect on innate resistance may be especially important in assessments of GM plants with a long lifespan such as trees.     

Spatial factors affecting statistical power in testing marine fauna displacement

Impacts of offshore wind farms on marine fauna are largely unknown. Therefore, one commonly adheres to the precautionary principle, which states that one shall take action to avoid potentially damaging impacts on marine ecosystems, even when full scientific certainty is lacking. We implement this principle by means of a statistical power analysis including spatial factors. Implementation is based on geostatistical simulations, accommodating for zero-inflation in species data. We investigate scenarios in which an impact assessment still has to be carried out. Our results show that the environmental conditions at the time of the survey is the most influential factor on power. This is followed by survey effort and species abundance in the reference situation. Spatial dependence in species numbers at local scales affects power, but its effect is smaller for the scenarios investigated. Our findings can be used to improve effectiveness of the economical investment for monitoring surveys. In addition, unnecessary extra survey effort, and related costs, can be avoided when spatial dependence in species abundance is present and no improvement on power is achieved.     

Element determination in environmental samples using Z-GFAAS with variable magnetic field

Electrothermal atomic absorption spectrometry methods with Zeeman effect background correction (Z-GFAAS) for determination of As, Sb, Se, Ag, Cd, Pb, Cu, Fe, Zn, Cr, and Ni in water and sludge samples were developed. The measurements using Z-GFAAS and variable magnetic field at the three-field dynamic mode permit the sensitivity adaptation for higher analytical concentrations. Calibration ranges were expanded over two orders of magnitude within one measurement run by the applying three-field dynamic mode of this correction system. There are presented calibration data, furnace programs, modifiers, and microwave digestion programs of the obviously monitored elements in the environmental samples. Very low detection limits (3σ criterion) were obtained. Quality assurance was checked by the suitable CRM. The study brings simultaneous determination of the samples with different element concentration range and different sample matrixes, as an important application information for an analyst working in the area of the eco-analytical research.     

Solid waste disposal site selection with GIS and AHP methodology: a case study in Senirkent�CUluborlu (Isparta) Basin, Turkey

The appropriate site selection for waste disposal is one of the major problems in waste management. Also, many environmental, economical, and political considerations must be adhered to. In this study, landfill site selection is performed using the Geographic Information System (GIS), the Analytical Hierarchy Process (AHP), and the remote sensing methods for the Senirkent?CUluborlu Basin. The basin is located in the E?irdir Lake catchment area, which is one of the most important fresh water in Turkey. So, waste management must be regulated in the basin. For this aim, ten different criteria (lithology, surface water, aquifer, groundwater depth, land use, lineaments, aspect, elevation, slope, and distance to roads) are examined in relation to landfill site selection. Each criterion was identified and weighted using AHP. Then, each criterion is mapped using the GIS technique, and a suitability map is prepared by overlay analyses. The results indicate that 96.3% of the area in the basin is unsuitable; 1.6%, moderately suitable; and 2.1%, most suitable. Finally, suitable regions in the basin are determined for solid waste landfill disposal and checked in the field. The selected and investigated regions are considered to be suitable for the landfill.     

Land degradation assessment by geo-spatially modeling different soil erodibility equations in a semi-arid catchment

Land degradation by soil erosion is one of the most serious problems and environmental issues in many ecosystems of arid and semi-arid regions. Especially, the disturbed areas have greater soil detachability and transportability capacity. Evaluation of land degradation in terms of soil erodibility, by using geostatistical modeling, is vital to protect and reclaim susceptible areas. Soil erodibility, described as the ability of soils to resist erosion, can be measured either directly under natural or simulated rainfall conditions, or indirectly estimated by empirical regression models. This study compares three empirical equations used to determine the soil erodibility factor of revised universal soil loss equation prediction technology based on their geospatial performances in the semi-arid catchment of the Saraykoy II Irrigation Dam located in Cankiri, Turkey. A total of 311 geo-referenced soil samples were collected with irregular intervals from the top soil layer (0-10?cm). Geostatistical analysis was performed with the point values of each equation to determine its spatial pattern. Results showed that equations that used soil organic matter in combination with the soil particle size better agreed with the variations in land use and topography of the catchment than the one using only the particle size distribution. It is recommended that the equations which dynamically integrate soil intrinsic properties with land use, topography, and its influences on the local microclimates, could be successfully used to geospatially determine sites highly susceptible to water erosion, and therefore, to select the agricultural and bio-engineering control measures needed.     

Short-term responses of soil chemistry, needle macronutrients and tree growth to clinker dust and fertiliser in a stand of Scots pine

Waste management of clinker dust by spreading it on forest soil was studied in a 25-year-old Scots pine stand on acidic sandy soil. Clinker dust (0.5 kg m?2), fertiliser (N, P, K, Mg, 0.05 kg m?2; N 190 kg ha?1) and untreated soil were applied on 120-m2 plots in four replicates. The fertiliser was included to confirm the nutrient limitation in the stand. Clinker dust increased the soil pH by 1.2 units relative to the pH of 4.6 in the untreated soil by the second year. Soil K and Mg concentrations were larger in the dust and fertiliser treatments. Nutrient diagnostics indicated that needles of untreated trees were deficient in N and K. Fertiliser treatment indicated that the growth of trees was limited by N, since the fertiliser tended to increase needle K, N, N/P, needle dry mass and diameters of stem and shoots. By an auxiliary dataset, no effects of the dust and fertiliser on possible excess of the micronutrient Mn were observed. Clinker dust increased needle K concentration, but due to the N limitation, there was no increase in the growth of stems, branches, shoots and needles. It was concluded that in plots of 120 m2 application of clinker dust at a rate of 0.5 kg m?2 was safe for the 21-year-old Scots pine stand in this trial on an acid nutrient-poor sandy soil during 4 years after the treatment.     

Long-term use of galvanized steel in external applications. Aspects of patina formation, zinc runoff, barrier properties of surface treatments, and coatings and environmental fate

Galvanized steel structures are used in a large variety of external constructions in the modern urban society, and their beneficial properties from a corrosion and oxidation perspective are well known. Less investigated is the extent of their contribution to the diffuse dispersion of zinc in the society and also to the environmental fate of corrosion-induced released zinc. This paper presents long-term runoff rates of zinc from galvanized steel surfaces with main focus on hot-dipped galvanized steel exposed for up to 10 years at nonsheltered urban atmospheric conditions. The long-term capacities of a naturally formed patina and the presence of surface treatments and coatings to hinder and reduce corrosion-induced zinc runoff from galvanized steel are elucidated. The environmental interaction of zinc runoff and concrete surfaces in pavement and urban storm drain systems is highlighted and the high capacity of concrete to retain released zinc presented.     

Assessment of elemental distribution and trace element contamination in surficial wetland sediments, Southern Tibetan Plateau

In order to analyze and evaluate different trace metals on surface water of the Changjiang River, concentrations of dissolved trace metals (Cu, Ni, Fe, Co, Sc, Al, Zn, Pb, Cd, Se, As, Cr, and Hg), major elements(Ca and Mg), and nutrient(NO $_{3}^{-})$ were measured. Samples were taken at 76 positions along Changjiang River in flood and dry seasons during 2007?C2008. Spatial distributions identified two main large zones mainly influenced by mineral erosion (sites 1?C22) and anthropogenic action (sites 23?C76), respectively. Principal component analysis (PCA) and hierarchical cluster analysis were used to identify the variance distinguishing the origin of water. Four significant components were extracted by PCA, explaining 74.91% of total variable. Cu, Ni, Fe, Co, Sc, Al, Ca, and Mg were mainly associated with the weathering and erosion of various rocks and minerals, while an anthropogenic source was identified for Cd and As. Although erosion was one source of Pb and Zn, they were also input by atmospheric deposition and industrial pollutions. NO $_{3}^{-}$ and Se were mainly associated with agriculture activities. However, Hg and Cr showed different sources. CA confirmed and completed the results obtained by PCA, classifying the data into two large groups representing different areas. Group 1 referred to the upper reaches which represented samples mainly corresponding to natural background areas. Group 2 referred to the middle and lower reaches including samples under anthropogenic influence. Meanwhile, group 2 was subdivided into three new groups, representing agricultural, industrial, and various artificial pollution sources, respectively.     

Atmospheric BTEX concentrations in the vicinity of the crude oil refinery of the Baltic region

Among chemical industries, petroleum refineries have been identified as large emitters of a wide variety of pollutants. Benzene, toluene, ethylbenzene, and xylene (BTEX) form an important group of aromatic volatile organic compounds (VOCs) because of their role in the troposphere chemistry and the risk posed to human health. A very large crude oil refinery of the Baltic States (200,000 bbl/day) is situated in the northern, rural part of Lithuania, 10 km from the town of Ma?eikiai (Lithuania). The objectives of this study were: (1) to determine of atmospheric levels of BTEX in the region rural and urban parts at the vicinity of the crude oil refinery; and (2) to investigate the effect of meteorological parameters (wind speed, wind direction, temperature, pressure, humidity) on the concentrations measured. The averaged concentration of benzene varied from 2.12 ppbv in the rural areas to 2.75 ppbv in the urban areas where the traffic was determined to be a dominant source of BTEX emissions. Our study showed that concentration of benzene, as strictly regulated air pollutant by EU Directive 2008/50/EC, did not exceed the limit of 5 ppbv in the region in the vicinity of the crude oil refinery during the investigated period. No significant change in air quality in the vicinity of the oil refinery was discovered, however, an impact of the industry on the background air quality was detected. The T/B ratio (0.50-0.81) that was much lower than 2.0, identified other sources of pollution than traffic.