黔中地区二级阶地堆积物边坡稳定性对工程建设的影响

结合在建工程清水河大花水电站实例,本文对黔中地区二级阶地堆积物边坡成因、堆积物物质成份、结构与其物理力学特性作了分析、总结,初步探讨了贵州省二级阶地堆积物边坡稳定性对工程建设的影响,望能给正在进行工程建设的同行以一定的参考,并对工程建设区的二级地堆积物边坡稳定性引起重视。     

Multimedia model of atrazine in plant-soil-groundwater system with a fugacity approach

ＩｎｔｒｏｄｕｃｔｉｏｎＣｏｎｔａｍｉｎａｔｉｏｎｏｆｅｄｉｂｌｅｖｅｇｅｔａｔｉｏｎｂｙｐｅｒｓｉｓｔｅｎｔ,ｕｂｉｑｕｉｔｏｕｓｃｈｅｍｉｃａｌｓｓｕｃｈａｓＰＣＢｓ,ｄｉｏｘｉｎｓ,ｐｅｓｔｉｃｉｄｅｓ,ａｎｄｈｅｒｂｉｃｉｄｅｓｐｒｏｖｉｄｅｓａｍａｊｏｒｅｘｐｏｓｕｒｅｒｏｕｔｅｔｏｈｕｍａｎｓ ,ｄｏｍｅｓｔｉｃａｎｉｍａｌｓａｎｄｗｉｌｄｌｉｆｅ .Ｕｐｔａｋｅｏｆｔｈｅｓｅｏｒｇａｎｉｃｃｈｅｍｉｃａｌｓｂｙｐｌａｎｔ,ａｎｄｓｕｂｓｅｑｕｅｎｔｄｉｓｔｒｉｂｕｔｉｏｎｉｎｔｈｅｐｌａｎ…     

我国热带地区胶—茶—鸡农林复合系统物质循环研究

以海南省文昌市典型的胶—茶—鸡农林复合模式为研究对象 ,以单作胶园、胶茶间作园为对照 ,采用定量研究与定性分析相结合的方法 ,研究其物质循环规律。结果表明 ,胶—茶—鸡农林复合系统的氮、磷输入、输出量最大 ,系统外物质投入率比另两系统明显减少 ,系统内养分循环量增加 ,因此 ,该系统具有较合理的物质循环结构。     

德兴地区超大型铜、金矿床成矿控制因素及其模拟实验

在深入研究德兴地区超大型铜、金矿成矿地质背景的基础上 ,从构造地球化学方面着重研究德兴地区超大型铜、金矿床成矿的控制因素 ,并进行构造控矿模拟实验。研究结果表明 ,德兴地区超大型铜、金矿床的形成除因其处于特殊的构造位置 ,具有特殊的地质背景及成矿环境外 ,还与多种地质作用、多种控矿因素耦合作用及地质构造长期发展演化使成矿物质多次叠加富集密切相关     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

内蒙古发展循环经济的方向与政策初探

本文从内蒙古资源、经济与环境问题现状出发，分析了发展循环经济的必要性、紧迫性和可行性，提出了我区建立循环经济的发展战略应考虑的基本原则，发展方向和法律、政策方面的建议。     

建设项目竣工环境保护验收监测工作探讨

论述建设项目竣工环境保护验收监测的作用,对制约验收监测规范发展的一些主要问题提出改进建议。     

大顶子山航电枢纽工程建库后上游水质总量控制研究

松花江大顶子山枢纽工程建设后,库区内水体流线及扩散规律的变化将影响库区内水质,受沿江排污影响,其规划目标的水环境容量将发生改变,因此对建库后上游水质总量控制进行研究很有意义.     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.