微生物燃料电池改性阳极处理PTA废水

探讨了不同改性阳极对微生物燃料电池(microbial fuel cell,MFC)产电性能及其对MFC处理难降解废水能力的影响.以单室空气阴极为基础,利用0.1 g电气石、质量分数75%二氧化锰/埃洛石纳米管(manganese bioxide/halloysite nanotube,MnO_2/HNT)和多壁碳纳米管-羧基(multi-walled carbon nanotube-carboxyl,MWCNT-COOH)对MFC阳极进行修饰.结果表明,不同改性阳极的MFC对含精对苯二甲酸(purified terephthalic acid,PTA)废水的去除率均高于70%,且化学需氧量(chemical oxygen demand,COD)去除率在79%以上.相较于其他几种改性阳极,以MWCNT-COOH改性材料作阳极的MFC产生的最大输出电压最高,获得的最大功率密度最高,分别为529 mV和252.73 mW·m~(-2).     

Re-evaluation of thyroid hormone signaling antagonism of tetrabromobisphenol A for validating the T3-induced Xenopus metamorphosis assay

We developed the T3-induced Xenopus metamorphosis assay, which is supposed to be able to sensitively detect thyroid hormone(TH) signaling disruption of chemicals. The present study aimed to validate the T3-induced Xenopus metamorphosis assay by re-evaluating the TH signaling antagonism of tetrabromobisphenol A(TBBPA), a known TH signaling disruptor. According to the assay we developed, Xenopus tadpoles at stage 52 were exposed to 10–500 nmol/L TBBPA in the presence of 1 nmol/L T3. After 96 hr of exposure, TBBPA in the range of 10–500 nmol/L was found to significantly inhibit T3-induced morphological changes of Xenopus tadpoles in a concentration-dependent manner in term of body weight and four morphological endpoints including head area(HA), mouth width(MW), unilateral brain width/brain length(ULBW/BL), and hind-limb length/snout-vent length(HLL/SVL).The results show that these endpoints we developed are sensitive for characterizing the antagonistic effects of TBBPA on T3-induced metamorphosis. Following a 24-hr exposure,we found that TBBPA antagonized expression of T3-induced TH-response genes in the tail,which is consistent with previous findings in the intestine. We propose that the tail can be used as an alternative tissue to the intestine for examining molecular endpoints for evaluating TH signaling disruption. In conclusion, our results demonstrate that the T3-induced Xenopus metamorphosis assay we developed is an ideal in vivo assay for detecting TH signaling disruption.     

Applicability of LIVE/DEAD BacLight stain with glutaraldehyde fixation for the measurement of bacterial abundance and viability in rainwater

Rainwater contains substantial bacteria and rain is an efficient pathway for the dissemination of bacteria from the atmosphere to land and water surfaces.However,quantitative information on rainwater bacteria is very limited due to the lack of a reliable method.In this study,the epifluorescence microscopy enumeration with the LIVE/DEAD BacLight Bacterial Viability Kit stain was verified to quantify the abundance of viable and non-viable bacterial cells in rainwater,with the 4',6-diamidino-2-phenylindole(DAPI) stain for the reference of total cell counts.Results showed that the total counts of bacterial cells by LIVE/DEAD BacLight staining were consistent with those by DAPI staining,and the average detection efficiency was(109 ± 29)%.The ratio of cell count with glutaraldehyde fixation to that without fixation was(106 ± 5)%on average.The bacterial concentration in negative control was usually an order of magnitude lower than that in rainwater samples.However,in case of small precipitation,the abundance in negative control could be more than that in rainwater samples.These results indicate that the enumeration with LIVE/DEAD BacLight bacterial viability assay coupled with glutaraldehyde fixation and careful negative control investigation is an approach applicable to the measurement of the concentration and viability of bacterial cells in rainwater.     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

Performance and microbial community of a membrane bioreactor system——Treating wastewater from ethanol fermentation of food waste

In this study, a lab-scale biological anaerobic/anaerobic/anoxic/membrane bioreactor(A_-~3MBR) was designed to treat wastewater from the ethanol fermentation of food waste,a promising way for the disposal of food waste and reclamation of resources. The 454 pyrosequencing technique was used to investigate the composition of the microbial community in the treatment system. The system yielded a stable effluent concentration of chemical oxygen demand(202 ± 23 mg/L), total nitrogen(62.1 ± 7.1 mg/L), ammonia(0.3 ±0.13 mg/L) and total phosphorus(8.3 ± 0.9 mg/L), and the reactors played different roles in specific pollutant removal. The exploration of the microbial community in the system revealed that:(1) the microbial diversity of anaerobic reactors A_1 and A_2, in which organic pollutants were massively degraded, was much higher than that in anoxic A_3 and aerobic MBR;(2) although the community composition in each reactor was quite different, bacteria assigned to the classes Clostridia, Bacteroidia, and Synergistia were important and common microorganisms for organic pollutant degradation in the anaerobic units, and bacteria from Alphaproteobacteria and Betaproteobacteria were the dominant microbial population in A_3 and MBR;(3) the taxon identification indicated that Arcobacter in the anaerobic reactors and Thauera in the anoxic reactor were two representative genera in the biological process. Our results proved that the biological A_-~3MBR process is an alternative technique for treating wastewater from food waste.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.     

北京市铺装道路降尘污染特征及来源

为研究北京市道路降尘在不同季节的污染特征及来源,选取北京市4条典型道路得到64个采样点的道路尘样品,采集的道路尘样品经过预处理得到75 μm以下的颗粒物,经过再悬浮及实验室分析得到PM_2.5的粒径分布和化学成分谱.结果表明:不同采样高度及不同道路类型的颗粒物粒径大体分布规律一致,颗粒物质量频率存在三个峰值,分别为0.75 μm（微粒径）、2.50 μm（小粒径）、4.50 μm（大粒径）;各季节的降尘颗粒物的化学组分中质量分数最大的是元素,主要元素（含量>1%）季节变化为冬季>春季>秋季>夏季,元素富集因子法得到污染元素为Cr、Cd、Sn、Cu、Zn、Pb、As,双重元素为Bi、Ti、Ni、W、Mg、Ca、TI、Mo、V、Fe、Zr、Ba,其余16种为非富集元素;颗粒物中离子质量分数在夏季最大为9.31%,春季、秋季、冬季的离子质量分数相差不大,其中Ca2+、NO₃-、Cl-、SO₄2-占总离子质量的80%左右;碳素中w（OC）和w（EC）的季节变化均为夏季>秋季>春季>冬季,OC/EC[w（OC）/w（EC）]的季节变化规律为冬季>春季>秋季>夏季.不同季节w（OC）和w（EC）的相关性大小为夏季>秋季>春季>冬季.对PM_2.5中化学组分来源分析表明,污染元素受机动车和建筑尘影响较大,与机动车尾气相比,机动车磨损造成的污染也不容小视;燃煤影响一直存在,但供暖期污染有所改善.机动车尾气、建筑尘及土壤尘对离子均有贡献,在夏季土壤尘、建筑尘、二次反应的综合影响较大,春季土壤尘影响更为突出.碳在夏秋季节受汽车尾气和建筑尘的影响较大,夏季二次反应影响不大;冬季除气象因素外,燃煤和生物质燃烧也不可忽视;春季土壤尘影响较为突出.      

煤制烯烃废水处理与回用技术解析

针对煤制烯烃项目废水的来源及水质特点,从生化处理技术与回用处理技术方面阐述了煤制烯烃废水处理现状及存在问题,展望了煤制烯烃废水处理与回用技术未来发展方向,指出了新型脱氮工艺、膜集成工艺及分质结晶技术在煤制烯烃废水处理中的可行性,为煤化工废水处理与资源化利用提供理论参考。     

成都市污染边界层高度的演变特征分析

基于2014年1月21日至2月5日成都市人民南路四段逐时PM_(2.5)质量浓度、大气能见度资料以及同期Mie散射激光雷达探测数据,遵循消光系数与细颗粒物质量浓度之间的关系,探讨污染边界层高度的演变特征。结果表明:污染时段内的污染边界层高度偏低,平均为221m;污染边界层高度与地面PM_(2.5)浓度的变化具有明显相关性,但污染边界层高度改变在前,地面PM_(2.5)浓度响应在后;污染边界层高度的日变化表现为单峰单谷型,峰值和谷值分别出现在08:00时和14:00时前后。     

北京市大气重污染过程中AQI的时空扩散特征及其预测模型

通过对北京市大气重度污染时段AQI与气象因子分析,探讨AQI的时间和空间变化特征,并建立了AQI的空间预测模型。结果表明:1)风速>2.5 m/s,且持续时间长(超过5 h)时,AQI曲线特征呈现倒"V"型。若其在1.7 m/s中部>北部,4 d后则中部>南部>北部。3)各方向上中部和北部的AQI预测模型中幂函数模型精度最高,且两者受西南方向的影响最大。