关于地震灾后过渡性安置和恢复重建

三、完善了地震灾后恢复重建制度 （一）强化了政府对地震灾后恢复重建工作的领导、组织和协调职能。 本法第六十四条规定了各级人民政府及其有关部门在恢复重建工作的职责。灾后恢复重建是一项十分紧迫、复杂、艰巨的任务,必须举全社会之力,组织各有关部门,共同努力,才能有力、有序、有效地做好,这就要求政府必须加强领导、组织和协调。     

Experimental study on pollutant movement in surf zone

The experiments on pollutant movement in surf zone were conducted on the two gentle beaches(with slope of 1:100 and 1:40, respectively), for diverse wave cases. The movement contours and direction of pollutants, under the action of regular and random waves with diverse wave amplitudes, were provided and studied in this paper. It was shown that, due to complicated hydrodynamics in surf zone, the pollutant movement state is quite complicated and different from that in pure current zone.     

Occurrence and volatility of several trace elements in pulverized coal boiler

The contents of eight trace elements(Mn, Cr, Pb, As, Se, Zn, Cd, Hg) in raw coal, bottom ash and fly ash were measured in a 220 t/h pulverized coal boiler. Factors affecting distribution of trace elements were investigated, including fly ash diameter, furnace temperature, oxygen content and trace elements‘ characters. One coefficient of Meij was also improved to more directly show element enrichment in combustion products. These elements may be classified into three groups according to their distribution: Group 1. Hg, which is very volatile. Group 2: Pb, Zn, Cd, which are partially volatile. Group 3: Mn, which is hardly volatile. Se may be located between groups 1 and 2. Cr has properties of both group ! and 3. In addition, the smaller diameter of fly ash, the more relative enrichment of trace elements (except Mn). The fly ash showed different adsorption mechanisms of trace elements and the volatilization of trace elements rises with furnace temperature. Relative enrichments of trace elements(except Mn and Cr) in fly ash are larger than that in bottom ash. Low oxygen content can not always improve the volatilization of trace elements. Pb is easier to form chloride than Cd during coal combustion. Trace elements should be classified in accordance with factors.     

Physicochemical interaction and its influence on deep bed filtration process

The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep bed filtration process were also studied theoretically. Through the comparison of the hydraulic and physicochemical forces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the microflocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and the experimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoretical prediction was reasonably consistent with the experimental results under different conditions, which indicated that the regulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of the physicochemical interactions. Further theoretical and experimental research should be carried out to investigate the interaction mechanism and its application in the deep bed filtration and other cases.     

Kinetics study of aqueous sorption of phenanthrene to humic acids and sediments

IntroductionThesorptionofhydrophobicorganiccontaminants(HOCs)onnaturalgeosorbentsplaysasignificantroleintheirtransport,degradationandultimatefateintheaquaticenvironment (Alexander,1995 ;Luthy ,1997;Weber,2 0 0 1) .Sincethelate 1970s,theorganicmatter(OM)ha…     

Multilevel air quality evolution in Shenyang: Impact of elevated point emission reduction

Visibility observed at different altitudes is favorable to understand the causes of air pollution. We conducted 4-years of observations of visibility at 2.8 and 60 m and particulate matter(PM) concentrations from 2015 to 2018 in Shenyang, a provincial city in Northeast China. The results indicated that visibility increased with the increasing height in winter(especially at night), and decreased with height in summer(especially at the daytime). PM concentration exhibited opposite vertical variati...     

Combined application of chemical fertilizer with green manure increased the stabilization of organic carbon in the organo-mineral complexes of paddy soil

Environmental Science and Pollution Research - The influence of the combined application of chemical fertilizer with green manure on the stabilization of organic carbon (C) was explored in the...     

Numerical and experimental studies of turbulence in vegetated open-channel flows

Environmental Fluid Mechanics - A numerical model based on the double-averaged (spatial and ensemble averaged) method has been developed to simulate vegetated free surface flows. The classical $$k...     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

Environmental effects and risk control of antibiotic resistance genes in the organic solid waste aerobic composting system: A review

• ARGs were detected in livestock manure, sludge, food waste and fermentation dregs. • The succession of microbial community is an important factor affecting ARGs. • Horizontal transfer mechanism of ARGs during composting should be further studied. Antibiotic resistance genes (ARGs) have been diffusely detected in several kinds of organic solid waste, such as livestock manure, sludge, antibiotic fermentation residues, and food waste, thus attracting great attention. Aerobic composting, which is an effective, harmless treatment method for organic solid waste to promote recycling, has been identified to also aid in ARG reduction. However, the effect of composting in removing ARGs from organic solid waste has recently become controversial. Thus, this article summarizes and reviews the research on ARGs in relation to composting in the past 5 years. ARGs in organic solid waste could spread in different environmental media, including soil and the atmosphere, which could widen environmental risks. However, the conventional composting technology had limited effect on ARGs removal from organic solid waste. Improved composting processes, such as hyperthermophilic temperature composting, could effectively remove ARGs, and the HGT of ARGs and the microbial communities are identified as vital influencing factors. Currently, during the composting process, ARGs were mainly affected by three response pathways, (I) “Microenvironment-ARGs”; (II) “Microenvironment-microorganisms-ARGs”; (III) “Microorganisms-horizontal gene transfer-ARGs”, respectively. Response pathway II had been studied the most which was believed that microbial community was an important factor affecting ARGs. In response pathway III, mainly believed that MGEs played an important role and paid less attention to eARGs. Further research on the role and impact of eARGs in ARGs may be considered in the future. It aims to provide support for further research on environmental risk control of ARGs in organic solid waste.