Future production of rainfed wheat in Iran (Khorasan province): climate change scenario analysis

Projecting staple crop production including wheat under future climate plays a fundamental role in planning the required adaptation and mitigation strategies for climate change effects especially in developing countries. The main aim of this study was to investigate the direction and magnitude of climate change impacts on grain yield of rainfed wheat (Triticum aestivum L.) production and precipitation within growing season. This study was performed for various regions in Khorasan province which is located in northeast of Iran. Climate projections of two General Circulation Models (GCM) for four locations under three climate change scenarios were employed in this study for different future time periods. A stochastic weather generator (LARS-WG5) was used for downscaling to generate daily climate parameters from GCMs output. The Decision Support System for Agrotechnology Transfer (DSSAT) Version 4.5 was employed to evaluate rainfed wheat performance under future climate. Grain yield of rainfed wheat and precipitation during growth period considerably decreased under different scenarios in various time periods in contrast to baseline. Highest grain yield and precipitation during growth period was obtained under B1 scenario but A1B and A2 scenarios resulted in sharp decrease (by ?57 %) of grain yield. Climate change did not have marked effects on evapotranspiration during the rainfed wheat growth. A significant correlation was detected between grain yield, precipitation and evapotranspiration under climate change for both GCMs and under all study scenarios. It was concluded, that rainfed wheat production may decline during the next 80 years especially under A2 scenario. Therefore, planning the comprehensive adaptation and mitigation program is necessary for avoiding climate change negative impact on rainfed wheat production.     

Evaluating the relationship between the respiratory exposure to the benzene with the primary damages of deoxyribonucleic acid and total antioxidant capacity in one of the oil companies in Iran

Environmental Science and Pollution Research - Benzene is a carcinogenic chemical substance which causes the injuries and damages through producing the free radicals in DNA (deoxyribonucleic acid)...     

An integrative framework for sustainable supply chain management practices in the oil and gas industry

This paper proposes a framework for understanding the contextual factors of sustainable supply chain management (SSCM) practices in the O&G industry. It is based on a literature review of studies related to SSCM of O&G topics. The review reveals that there is a lack of SSCM research specific to the industry. Present studies focus on individual stages of its supply chain and do not consider all dimensions of sustainable development, namely economic, environmental and social factors. In addition, existing frameworks lack important contextual aspects of the industry's business and organizational environment. To address these gaps, our research develops an overarching framework operationalizing the internal and external contextual factors of the O&G industry environment that can influence the outcome of its SSCM practices. The proposed framework is useful as a tool in the formulation and implementation of SSCM strategy that enables alignment of a company's internal capabilities with its external environment.     

Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

A novel photocatalytic reactor for wastewater treatment was designed and constructed. The main part of the reactor was an aluminum tube in which 12 stainless steel circular baffles and four quartz tube were placed inside of the reactor like shell and tube heat exchangers. Four UV–C lamps were housed within the space of the quartz tubes. Surface of the baffles was coated with TiO₂. A simple method was employed for TiO₂ immobilization, while the characterization of the supported photocatalyst was based on the results obtained through performing some common analytical methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and BET. Phenol was selected as a model pollutant. A solution of a known initial concentration (20, 60, and 100 ppmv) was introduced to the reactor. The reactor also has a recycle flow to make turbulent flow inside of the reactor. The selected recycle flow rate was 7?×?10^?5 m³.s^?1, while the flow rate of feed was 2.53?×?10^?7, 7.56?×?10^?7, and 1.26?×?10^?6 m³.s^?1, respectively. To evaluate performance of the reactor, response surface methodology was employed. A four-factor three-level Box–Behnken design was developed to evaluate the reactor performance for degradation of phenol. Effects of phenol inlet concentration (20–100 ppmv), pH (3–9), liquid flow rate (2.53?×?10^?7?1.26?×?10^?6 m³.s^?1), and TiO₂ loading (8.8–17.6 g.m^?2) were analyzed with this method. The adjusted R ² value (0.9936) was in close agreement with that of corresponding R ² value (0.9961). The maximum predicted degradation of phenol was 75.50 % at the optimum processing conditions (initial phenol concentration of 20 ppmv, pH?～?6.41, and flow rate of 2.53?×?10^?7 m³.s^?1 and catalyst loading of 17.6 g.m^?2). Experimental degradation of phenol determined at the optimum conditions was 73.7 %. XRD patterns and SEM images at the optimum conditions revealed that crystal size is approximately 25 nm and TiO₂ nanoparticles with visible agglomerates distribute densely and uniformly over the surface of stainless steel substrate. BET specific surface area of immobilized TiO₂ was 47.2 and 45.8 m² g^?1 before and after the experiments, respectively. Reduction in TOC content, after steady state condition, showed that maximum phenol decomposition occurred at neutral condition (pH?～?6). Figure

The schematic view of the experimental set-up     

Correction to: Evaluating the relationship between the respiratory exposure to the benzene with the primary damages of deoxyribonucleic acid and total antioxidant capacity in one of the oil companies in Iran

Environmental Science and Pollution Research -     

A strategic scheme for partnership supply networks focusing on green multi-agent transportations: a game theory approach

Environmental Science and Pollution Research - Competition to gain more market share leads to the development of a dynamic environment and the fulfillment of an improvement cycle in supply...     

Lean,agile, resilient,and green human resource management: the impact on organizational innovation and organizational performance

Environmental Science and Pollution Research - There are four paradigms of lean, agile, resilient, and green (LARG) which can promote human resource culture to create novel ideas and increase...     

A case–control study on the relationship between urine trace element levels and autism spectrum disorder among Iranian children

Autism spectrum disorder (ASD) is a type of neurodevelopmental disorder characterized mainly by qualitative deficiencies in social communication skills, accompanied by repetitive and restricted behavior patterns. This study was conducted to investigate the associations between the risk of ASD development in children and exposure to trace elements (arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn)). Two groups of children, including 44 ASD and 35 typically developing (TD) children, were selected, and their fasting urine samples were obtained. The concentration levels of trace elements were assayed using ICP-MS. The results showed that as compared to the TD group, the concentration levels of As (p = 0.002) and Pb (p < 0.001) and also Cr (p < 0.001), Cu (p = 0.001), and Ni (p < 0.001) were significantly higher among ASD children. In terms of gender, boys with ASD showed elevated levels of Cr, Cu, Ni, and Pb, whereas the urine levels of As, Cr, Cu, Ni, and Pb were markedly higher among girls when compared to the non-ASD children. Under the logistic regression model, the risk difference for As, Co, Cr, Cu, Ni, Pb, and Zn remained significant when adjustment was applied for age and gender confounders.

     

Removal of Reactive Blue 19 dye from synthetic wastewater using UV/H2O2 and UV/Cl advanced oxidation processes

The textile and dyeing industries are among the largest water-consuming and polluting industries in the world. The most important feature of the textile dyeing industry wastewater is its color, due to the use of colored materials. Most of these dye compounds are resistant to conventional purification methods and their biodegradation is very low through secondary purification processes, resulting in incomplete removal. Therefore, selecting the optimal method to remove these color compounds is essential. In this study, we studied the removal of an organic dye contaminant (Reactive Blue dye 19 [RB19]) using advanced oxidation processes (AOPs). For this purpose, ultraviolet (UV) mercury lamps with a wavelength of 254 nm and a voltage of W16 inside a reactor were used as an energy source. The experiments were performed in a collimated beam reactor inside a dark chamber. Two oxidizers, sodium hypochlorite (NaOCl) and hydrogen peroxide (H₂O₂), were used to remove RB19 from the artificial sewage stream. Removal of RB19 with a concentration of 20 mg/L with variable pH (5, 7, and 9), oxidant concentrations (5, 10, and 20 mg/L), and time (5, 10, 15, and 30 min) were investigated during the processes of photolysis, chemical oxidation (by H₂O₂ and NaOCl), and UV/NaOCl and UV/H₂O₂ AOPs. The photolysis process did not remove the RB19. The highest removal efficiencies of RB19 by chemical oxidation processes with NaOCl and H₂O₂, UV/NaOCl, and UV/H₂O₂ at optimal conditions (pH = 5, [oxidant] = 20 mg/L, RB19 = 20 mg/L, and radiation intensity of 1005 mJ/cm²) were 64.49%, 0.88%, 99.7%, and 13.31%, respectively. These results indicate that the hydroxyl radical was produced, under optimum conditions, more in the acidic medium; thus, the RB19 removal efficiency was higher in the acidic medium. The combination of UV rays with oxidants resulted in the production of more hydroxyl radicals and increased removal efficiency.