棉秆基活性炭的制备及其对2,4-二硝基苯酚的吸附

以棉秆为原料,以KOH为活化剂,制备了高比表面棉秆基生物质活性炭。分析了制得的活性炭的元素组成、表面官能团、吸附能力等物化性能,探讨了浸渍比,活化温度,活化时间等工艺参数对制备活性炭得率、表面官能团、碘值、亚甲基蓝值等性能的影响,并通过静态吸附实验比较了不同条件下制备活性炭对2,4-二硝基苯酚的吸附性能,探讨了典型炭样品对2,4-二硝基苯酚的等温吸附特性。结果表明,KOH活化棉秆基生物质活性炭的表面物化性质随浸渍比、活化温度等工艺参数变化而变化,活化适宜条件为浸渍比1：3、活化温度800℃、活化时间90 min,在此条件下制得的炭样的碘值为1 251 mg/g,亚甲基蓝吸附值为478 mg/g,分别是国家一级品标准的1.25倍与3.54倍;对2,4-二硝基苯酚的Langmuir最大吸附量为747 mg/g,与Freundlich模型相比,Langmuir模型能较好地描述2,4-二硝基苯酚在炭样上的吸附行为,表明制备活性炭样品表面吸附位的能量分布较为均一。     

RuO2-IrO2/Ti阳极电催化降解偶氮染料甲基橙模拟废水

以自制Ti基RuO2-IrO2镀层形稳电极为阳极,采用电催化氧化处理偶氮染料甲基橙模拟废水。以硫酸钠为支持电解质,在自然pH条件下分别考察了电解时间、电极间距、电流密度和电解质浓度等因素对甲基橙去除率的影响,并分析其原因。实验结果表明,在自然pH、电极间距为1.0 cm、电流密度为30.0 mA/cm2、电解质硫酸钠浓度为20.0 g/L、电解1.0 h,甲基橙去除率高达90.0%以上。 因此,电催化氧化法作为一种高效、简便的染料废水处理技术,具有一定的应用潜力。     

Fe(Ⅱ)EDTA络合吸收-铁粉还原再生脱除NO性能

利用Fe(Ⅱ)EDTA络合吸收-铁粉间歇还原再生脱除NO并回收氨资源的方法,实验研究了铁粉还原再生Fe(Ⅱ)(NO)EDTA的过程及其影响因素。结果表明,以0.015 mol/L的Fe(Ⅱ)EDTA做吸收剂,在起始pH 5.5、温度323K条件下吸收400×10-6~500×10-6的NO,脱除率95%以上;铁粉还原再生Fe(Ⅱ)(NO)EDTA过程可用缩芯模型阐释;铁粉添加量与搅拌强度直接决定了铁粉质点数量,是影响反应的重要因素;实验中Fe(Ⅱ)(NO)EDTA络合液150 mL,氧气含量为5%时,搅拌速度900 r/min、粒径为0.12 mm的铁粉浓度5.3 g/L、温度353 K、pH=6为最适宜再生条件。     

Formation of shaped barium sulfate-dye hybrids: waste dye utilization for eco-friendly treatment of wastewater

Purpose

Owing to the present complexity and difficulty of concentrated dye wastewater treatment, this work aimed to synthesize a reproducible waste-sorbing material for the treatment of wastewater by forming the dye-conjugating complex hybrid.

Methods

The inorganic/organic hybridization was applied to prepare the objective material by immobilizing waster dye-Mordant blue 9 (MB) with barium sulfate (BaSO₄). The composition and pattern of the formed material were determined by spectrometry and characterized by SEM and XRD, and their formation process was clarified. The adsorption of cationic dye-basic blue BO (BB) and copper ion was investigated..

Results

The hybrid of MB alone into growing BaSO₄ formed the pineapple-like particles while that of the MB/BB-conjugating complex was the rhombus material. The adsorption of BB on the MB–BaSO₄ hybrid was probably attributed to ion-pair equilibrium and that of Cu²⁺ may result from the complexation. The treatment of dye and heavy metal wastewaters indicated that the MB hybrid material removed 99.8% BB and 97% Cu²⁺ and the dye-conjugating hybrid with growing BaSO₄ 100% MB, 99.5% BB, and 44% Cu²⁺.

Conclusion

The waste MB–BaSO₄ hybrid material is efficient to treat cationic dye and Cu²⁺ wastewater. The dye-conjugating hybridization method is the first to be advanced for in situ wastewater treatment, and it showed a combined effect for the removal of both organic dyes and heavy metals.     

Cadmium accumulation, activities of antioxidant enzymes, and malondialdehyde (MDA) content in Pistia stratiotes L.

The aquatic plant Pistia stratiotes L. (water lettuce) was studied due to its capability of absorption of contaminants in water and its subsequent use in wetlands constructed for wastewater treatment. The effects of Cd on root growth, accumulation of Cd, antioxidant enzymes, and malondialdehyde (MDA) content in P. stratiotes were investigated. The results indicated that P. stratiotes has considerable ability to accumulate Cd. Cadmium induced higher superoxide dismutase (SOD) and peroxidase (POD) activities than catalase activity, suggesting that SOD and POD provided a better defense mechanism against Cd-induced oxidative damage. The accumulation of Cd promoted MDA production.     

A highly resolved temporal and spatial air pollutant emission inventory for the Pearl River Delta region, China and its uncertainty assessment

A highly resolved temporal and spatial Pearl River Delta (PRD) regional emission inventory for the year 2006 was developed with the use of best available domestic emission factors and activity data. The inventory covers major emission sources in the region and a bottom–up approach was adopted to compile the inventory for those sources where possible. The results show that the estimates for SO₂, NO_x, CO, PM₁₀, PM_2.5 and VOC emissions in the PRD region for the year 2006 are 711.4 kt, 891.9 kt, 3840.6 kt, 418.4 kt, 204.6 kt, and 1180.1 kt, respectively. About 91.4% of SO₂ emissions were from power plant and industrial sources, and 87.2% of NO_x emissions were from power plant and mobile sources. The industrial, mobile and power plant sources are major contributors to PM₁₀ and PM_2.5 emissions, accounting for 97.7% of the total PM₁₀ and 97.2% of PM_2.5 emissions, respectively. Mobile, biogenic and VOC product-related sources are responsible for 90.5% of the total VOC emissions. The emissions are spatially allocated onto grid cells with a resolution of 3 km × 3 km, showing that anthropogenic air pollutant emissions are mainly distributed over PRD central-southern city cluster areas. The preliminary temporal profiles were established for the power plant, industrial and on-road mobile sources. There is relatively low uncertainty in SO₂ emission estimates with a range of −16% to +21% from power plant sources, medium to high uncertainty for the NO_x emissions, and high uncertainties in the VOC, PM_2.5, PM₁₀ and CO emissions.     

2013年苏州春季一次重污染天气的过程分析

研究了2013年3月在江苏范围内的一次重污染天气过程,重点分析苏州在此次污染过程中大气污染的变化特征。污染过程中,苏州市颗粒物浓度上升较为明显, PM10的小时质量浓度最高达548μg／m3, PM2．5质量浓度也达到197μg／m3,污染持续时间为2 d,3月8—9日当地空气质量均达到中度污染水平。根据后向轨迹模型、颗粒物离子浓度的分析,此次污染是由外来浮尘及苏州本地污染物排放所造成的区域霾污染影响所致。根据监测结果与实际污染特征,针对性地提出了对策和措施。     

Determination of PAHs by On-Line Polarization Synchronous Fluorescence with HPLC

A novel analytical method has been established for on-line simultaneous determination of fluorene and acenaphthene,chrysene and benzo[a]anthracene (B[a]A) by polarization synchronous fluoromet.y (PSF) coupled to high performance liquid chromatography (HPLC). The detection limits were: 0.039, 0.046, 0.016 and 0.042 mgL-1 for fluorene, acenaphthene, chrysene and B[a]A, respectively. The proposed method has been successfisily applied to simultaneous determination of these PAHs in environmental air and marine sediment samples.     

凹凸棒黏土对水体和底泥中Cr (Ⅵ)的吸附

为考察凹凸棒黏土对水体和底泥中Cr（Ⅵ）污染治理与修复效果,通过实验室模拟试验,运用Langmuir和Frundlich等温吸附模型及准一级和准二级动力学模型,研究了天然凹凸棒黏土对水体中Cr（Ⅵ）的吸附特性,并研究了pH对吸附过程的影响及凹凸棒黏土对底泥中Cr（Ⅵ）金属形态的影响,通过XRF（X-射线荧光光谱仪）和SEM（扫描电镜）确定凹凸棒黏土的化学组成和微观形貌结构.结果表明:天然凹凸棒黏土内部呈纤维状且多孔隙,成分中含有铁、铝、钙等元素,吸附后的材料中发现了Cr元素;Langmuir-Frundlich吸附等温模型（R2=0.996）和准一级动力学模型（R2=0.993）较好地拟合了凹凸棒黏土对Cr（Ⅵ）的吸附热力学与动力学过程,动力学模拟的Cr（Ⅳ）平衡吸附量及实测值分别为1.38和1.37 mg/g.溶液pH对Cr（Ⅵ）的吸附具有影响,其最佳pH为3,此时吸附率最高,为85.80%.研究显示,向底泥中添加凹凸棒黏土能促使Cr形态由不稳定态（酸溶态和铁铝还原态之和）向稳定态（可氧化态和残渣态之和）转化,从而达到修复底泥中Cr（Ⅵ）污染的目的.      

木质素降解酶及其调控机理研究的进展

近年来有关木质素降解微生物和木质素降解酶的产与调控机理的研究表明，腐霉和细菌在木质自然降解中起着重要作用，腐霉的降解作用发生在次级代谢阶段，而细菌发生在初级代谢阶段，影响木质素降解酶的产生酶活力高低的因素有碳氮的选择与限制；诱导物的添加；表面活性剂的使用；某些金属离子浓度水平的改变；菌丝的固定化，温度和摇床转速的变换等。