Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

垃圾焚烧烟气中HCl与消石灰的反应机理研究

测试了两种消石灰与垃圾焚烧烟气中HCl的反应率,得出了消石灰的反应率与反应时间的反应曲线,分析了消石灰与HCl的反应机理及影响消石灰最终反应率的因素。试验结果表明,消石灰与HCl反应初期按灰层扩散控制进行,两种消石灰的最终反应率分别为16％和36％。     

GB/T18664-2002《呼吸防护用品的选择、使用与维护》系列讲座第二讲了解呼吸防护用品的分类和防护功能

有关呼吸防护用品的知识非常重要,它不仅使我们了解每类产品的功能和特点,更重要的是了解其局限性,因为没有一种防护用品是万能的,所以这些知识可帮助我们做出尽可能安全的选择。呼吸防护用品主要分过滤式和隔绝式两类(表1)。     

Study on the regional atomized dust suppression technological system based on the measured law of dust concentration distribution in longwall fully mechanized mining faces

Environment, Development and Sustainability - In order to reveal the distribution and migration law of downwind and upwind coal cutting, total dust (TD) and respirable dust (RD) concentration...     

Effects of Different Litter Treatments on Seed Germination and Seedling Growth of Pinus densata in Southeast Tibet,China

Russian Journal of Ecology - The aim of this study is to explore the effects of the litter cover thickness and cleaning methods on seed germination and seedling growth of Pinus densata. The overall...     

亚热带稻田土壤碳氮磷生态化学计量学特征

为了解稻田土壤中是否存在稳定的土壤有机碳(C)、氮(N)和磷(P)比值,基于亚热带区110个水稻土剖面和587个发生层的土壤调查数据库,在区域尺度上分析了典型水稻土C∶N∶P比值的生态化学计量学特征,并应用相关分析和冗余分析,研究水稻土C∶N∶P比值与土壤-环境因子(地形和母质、土壤发生层、土壤类型和土壤理化性质)的关系.结果显示,亚热带区稻田土壤C∶N、C∶P和N∶P的剖面加权平均值分别为12. 6、49和3. 9,C∶N∶P为38∶3. 2∶1.不同母质起源、不同土壤亚类和不同发生层的水稻土C∶N变异相对较小;但C∶P和N∶P的变异很大,两者均值也远低于全球(186和13. 1)和中国土壤(136和9. 3)的C∶P和N∶P的平均水平.尽管稻田土壤剖面的C∶N∶P相对不稳定,但由于稻田表土生物与环境相互作用强烈,表土C∶N相对稳定(14. 2).这反映长期水耕熟化作用下,稻田表土中C和N仍存在紧密的耦合作用.然而,在稻田土壤剖面上,C∶P和N∶P并不稳定,SOC与全P含量、全N与全P含量也无显著相关性,表明环境变化可能导致土壤C∶N∶P解耦.地形、土壤质地、氧化铁和容重是调控稻田土壤剖面C∶N∶P的关键土壤环境因子.