La/Ce-codoped Bi2O3 composite photocatalysts with high photocatalytic performance in removal of high concentration dye

A series of La/Ce-codoped Bi_2O_3 composite photocatalysts were fabricated via hydrothermal–calcination process. The as-prepared products were intensively characterized by some physicochemical characterizations like N_2 physical adsorption, X-ray powder diffraction(XRD), scanning electron microscope(SEM), transmission electron microscope(TEM), UV–Vis diffuse reflectance(UV–Vis DRS), Fourier transform infrared spectroscopy(FT-IR),photoelectrochemical measurements, and photoluminescence(PL) spectroscopy. The characterization results indicated that La and Ce doping induced obvious crystal phase transformation in Bi_2O_3, from monoclinic to tetragonal phase. La and Ce codoping also gave rise to the obvious synergetic effects, e.g., the lattice contraction of Bi_2O_3, the decrease of crystal size and the increase of surface area. The photocatalytic performance of the prepared catalysts was evaluated by removal of dye acid orange II with high concentration under visible light irradiation. Results showed that La/Ce-codoped Bi_2O_3 displayed much higher photocatalytic performance than that of bare Bi_2O_3, single La or Ce doped Bi_2O_3 samples. The superior photocatalytic activity was mainly attributed to the improved texture and surface properties and the synergistic effects of La and Ce codoping on suppressing the recombination of photo-generated electrons(e~-) and holes(h~+).     

Performance of CH4MOD wetland for the case study of different regions of natural Chinese wetland

Reliable national estimates of CH₄ emissions from natural wetlands depend on model validation based on site observations. We therefore evaluated the performance of the CH4MOD_wetland model in simulating CH₄ emissions from 11 representative wetland sites in five regions of China. Model performance analysis showed that this method effectively simulates differences in the CH₄ fluxes between different sites and regions. The model efficiency for estimating the daily CH₄ fluxes in the northeastern China (NE), Inner Mongolia and northwestern China (NW), the North China plain and the Middle-Lower Yangtze Plain (E) and the Qinghai Tibetan Plateau (SW) was 0.51, 0.20, 0.52 and 0.65, respectively. The efficiency for estimating the annual mean CH₄ fluxes in southern China (S) was 0.99. Systematic negative deviation between the simulated and observed CH₄ emissions existed in all regions, especially in the NW region, which had a mean deviation (RMD) value of − 36.7%. On the national scale, the root mean square error (RMSE), the RMD, the model efficiency (EF) between the simulated and observed seasonal values were 28.7%, − 7.8% and 0.93, respectively. The CH₄ emissions showed the highest sensitivity to air temperature in the NE and SW regions, and to water table depth in the E region. Based on the sensitivity analysis, future climate warming and wetting are likely to increase the wetland CH₄ emissions at different levels in all regions of China.     

燃煤电厂湿法脱硫对细颗粒物的脱除特性

应用DGI承重撞击器对四台燃煤机组湿法脱硫前、后细颗粒物进行采集,分析细颗粒物的粒径分布、元素组成以及脱硫系统的脱除效率.结果表明:脱硫前细颗粒物粒径峰值出现在0.20~0.40 μm处,脱硫后峰值出现在0.20~0.30 μm处.经过湿法脱硫系统后ρ(PM_2.5)、ρ(PM₁)、ρ(PM_0.5)、ρ(PM_0.2)出现不同程度的增长,平均增长率分别为13.28%、19.57%、28.79%、33.51%.分粒径颗粒物中ρ(Si)、ρ(Al)在脱硫前、后均随着颗粒物粒径的减小呈递减趋势,并且脱硫后ρ(Si)、ρ(Al)均有不同程度的降低,ρ(Fe)随颗粒物粒径的减小呈增加趋势,表现出一定的富集特性;湿法脱硫后Ca在PM₁中的质量浓度出现明显的增长,ρ(Ca)由18.86~51.47 μg/m3增至41.87~84.83 μg/m3. Si、Al是PM_2.5中的主要元素,经过湿法脱硫后ρ(Si)、ρ(Al)由59%~72%降至43%~59%;而Ca在PM_2.5中表现出相反的变化趋势,ρ(Ca)由8%~13%升至17%~26%.      

沈阳市生态文明体制改革规划研究

以制度体制推进环境管理的有效性,是改善环境质量、解决环境问题及实现绿色发展最为直接且经济有效的手段。通过规划,对现有生态环境制度体系存在问题进行分析,提出沈阳市制度体制改革内容,明确改革方向。设计以空间管控、生态补偿、环境监管、治理市场、绩效追责、公众参与为核心,以绿色环保产业为承接的沈阳市"6+1"生态文明制度体系,明晰政府部门责任,建立联动机制,将单项制度孤岛联系起来,以制度创新及制度体系构建推动环境管理制度改革及沈阳市生态文明建设。     

悬浮颗粒物浓度对溢油沉潜过程影响的试验研究

溢油事故发生后,漂浮油会与水中的悬浮颗粒物发生相互作用形成油-悬浮颗粒物聚合体（oil-suspended particulate matter aggregates,OSAs）,进而分散在水中或沉降到水底。实验室通过批量振荡实验,利用紫外分光光度法,研究了天然沙土对阿曼原油沉潜过程的影响。结果表明,当振荡频率一定时,沙土能够显著促进阿曼原油在水中的沉潜,其中大部分以半潜油的形式悬浮在水中,少部分与沙土相互作用形成了油-悬浮颗粒物聚合体。随着振荡时间的增加,阿曼原油的沉潜率迅速增大,达到最大值后趋于稳定。当沙土的浓度在100~400 mg/L范围内增加时,阿曼原油的最大沉潜率和沉潜速率提高,沉潜过程达到平衡所需要的时间缩短。     

金属掺杂锐钛矿型TiO_2光催化氧化水中As(Ⅲ)的试验研究

对不同掺杂比例的3d过渡金属和稀土掺杂的TiO_2对水中三价砷离子[As(Ⅲ)]的光催化氧化效果进行试验。结果表明:Yb~(3+)以0.8%的掺杂比例掺杂锐钛矿[Yb_(0.8%)/TiO_2]的光催化氧化能力最强,且Zn_(0.1%)/TiO_2、La_(0.3%)/TiO_2、Tb_(0.5%)/TiO_2和Dy_(0.1%)/TiO_2的光催化氧化能力都比纯TiO_2强;pH值对Yb_(0.8%)/TiO_2的光催化氧化反应的影响不明显;Yb_(0.8%)/TiO_2的光催化氧化反应表现为假零级反应动力学。正交试验表明:[光]、[Yb_(0.8%)/TiO_2]、[Yb_(0.8%)/TiO_2]×[光]和[As(Ⅲ)]对试验效果的影响显著,是光催化氧化反应的主要影响因素。     

苏锡常地区PM2.5污染特征及其潜在源区分析

利用2014年12月—2015年11月苏锡常地区国控大气环境质量监测站发布的逐时数据,分析了研究区PM_(2.5)浓度的季节变化和空间分布特征,并利用HYSPLIT模型分析了大气污染物的输送路径及苏锡常地区PM_(2.5)的潜在源区.结果表明,苏锡常地区PM_(2.5)浓度日均值变化趋势基本一致,均呈现冬季高、夏季低的规律.PM_(2.5)浓度四季空间差异显著,不同监测站之间的差异较小.四季PM_(2.5)浓度与其它污染物之间相关性显著.单位面积污染物排放量与空气质量分布的空间错位,表明该地区PM_(2.5)污染与区域性污染物迁移有较大关系.苏锡常地区气流后向轨迹季节变化特征明显,冬、春、秋季的气流主要来自西北内陆地区,夏季气流以东南和西南方向输入居多.聚类分析表明,来自内陆的污染气流和来自海洋的清洁气流是苏锡常地区两种主要输送类型,外源污染气流不仅直接输送颗粒物,还贡献了大量的气态污染物.山东南部、江苏西部、安徽东部、浙江北部及江西西北地区对苏锡常冬季PM_(2.5)浓度贡献较大,春、夏、秋季的潜在源区主要分布在苏锡常本地和周边城市.     

通过剖析达钢二次能源综合利用分析钢铁行业节能减排潜力

二次能源综合利用是我国钢铁行业完成节能减排既定目标的技术关键.本文通过对达钢二次能源综合利用的剖析,评述了钢铁行业节能减排的潜力.     

Source apportionment of ambient PM10 in urban areas of Wuxi, China

A total of 168 PM₁₀ samples were collected during the year of 2005 at eight sites in the city of Wuxi in China. Fifteen chemical elements, three water-soluble ions, total carbon and organic carbon were analyzed. Six source categories were identified and their contributions to ambient PM₁₀ in Wuxi were estimated using a nested chemical mass balance method that reduces the effects of colinearity on the chemical mass balance model. In addition, the concentrations of secondary aerosols, such as secondary organic carbon, sulfate and nitrate, were quantified. The spatially averaged PM₁₀ was high in the spring and winter (123 ??g·m^?3 and low in the summer-fall (90 ??g·m^?3). According to the result of source apportionment, resuspended dust was the largest contributor to ambient PM₁₀, accounting for more than 50% of the PM₁₀ mass. Coal combustion (14.6%) and vehicle exhaust (9.4%) were also significant source categories of ambient PM₁₀. Construction and cement dust, sulfates, secondary organic carbon, and nitrates made contributions ranging between 4.1% and 4.9%. Other source categories such as steel manufacturing dust and soil dust made low contributions to ambient PM₁₀.     

产生物表面活性剂耐盐菌的筛选鉴定及其对石油污染盐渍化土壤的修复作用

为得到高效产生物表面活性剂耐盐菌,从黄河三角洲石油污染盐渍化土壤中分离出41株细菌,经测定发酵液排油活性、表面张力和乳化值（EI24）,得到1株高效产生物表面活性剂耐盐菌BF40.通过形态、生理生化特征和16S rDNA序列分析,确定该菌为沙雷氏菌（Serratia sp.）.通过液体培养试验,研究了BF40的耐盐特性和降解原油能力,并通过室内土壤培养试验研究了BF40及其产生的生物表面活性剂对石油污染盐渍化土壤的修复作用.结果表明,在含5~70 g·L^-1NaCl液体培养基中BF40生长良好,属中度耐盐菌.BF40能有效利用原油,在含10 g·L^-1NaCl液体培养基中培养7d,原油降解率达到56.7%.添加BF40产生的生物表面活性剂或接入BF40能明显促进盐渍化土壤石油烃的降解,修复60 d,土壤石油去除率与对照相比分别提高了24.6%和13.4%.接种BF40能降低土壤溶液表面张力,明显提高土壤脱氢酶活性,更能有效促进沥青质降解.添加生物表面活性剂土壤脱氢酶活性与对照相比没有显著差异,但更能有效降低土壤溶液表面张力,促进饱和烃降解,表明接种BF40和添加生物表面活性剂可能对促进石油污染盐渍化土壤的生物修复存在不同作用机制.