Comparative sorption,desorption and leaching potential of aminocyclopyrachlor and picloram

Sorption and desorption of aminocyclopyrachlor (6-amino-5-chloro-2-cyclopropylpyrimidine-4-carboxylic acid) were compared to that of the structurally similar herbicide picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid) in three soils of differing origin and composition to determine if picloram data is representative of aminocyclopyrachlor behavior in soil. Aminocyclopyrachlor and picloram batch sorption data fit the Freundlich equation and was independent of concentration for aminocyclopyrachlor (1/n = 1), but not for picloram (1/n = 0.80–0.90). Freundlich sorption coefficients (K _f) for aminocyclopyrachlor were lowest in the eroded and depositional Minnesota soils (0.04 and 0.12 μmol ^(1–1/n) L^1/n kg^?1) and the highest in Molokai soil (0.31 μmol ^(1–1/n) L^1/n kg^?1). For picloram, K _f was lower in the eroded (0.28 μmol ^(1–1/n) L^1/n kg^?1) as compared to the depositional Minnesota soil (0.75 μmol ^(1–1/n) L^1/n kg^?1). Comparing soil to soil, K _f for picloram was consistently higher than those found for aminocyclopyrachlor. Desorption of aminocyclopyrachlor and picloram was hysteretic on all three soils. With regard to the theoretical leaching potential based on groundwater ubiquity score (GUS), leaching potential of both herbicides was considered to be similar. Aminocyclopyrachlor would be ranked as leacher in all three soils if t_1/2 was > 12.7 days. To be ranked as non-leacher in all three soils, aminocyclopyrachlor t_1/2 would have to be <3.3 days. Calculated half-life that would rank picloram as leacher was calculated to be ～15.6 d. Using the current information for aminocycloprachlor, or using picloram data as representative of aminocycloprachlor behavior, scientists can now more accurately predict the potential for offsite transport of aminocycloprachlor.     

The influence of environmental factors on the molluscicidal activity of Euphorbia milii latex

Abstract

The present study was undertaken to investigate the influence of biotic (snail size and presence of food during the test) and abiotic factors (temperature, water hardness and concentration of organic materials) on the molluscicidal activity of Euphorbia milii latex. Bioassays were conducted with B. glabrata (10 snails per concentration) and snail lethality was evaluated after 24 hr and 48 hr of exposure to lyophilized latex solutions. Neither the degree of water hardness, nor the presence of food during the test affected latex‐induced snail mortality. The snail size had a minor influence on E.milii‐induced snail lethality. Newly‐hatched (shell diameter ≤ 1mm) as well as young (3–8 mm) snails were slightly less susceptible than older (10–25 mm) mollusks. On the other hand, the molluscicidal effect of E.milii latex was modified by environmental factors such as temperature (i.e. LC₅₀ and LC₉₀ values were halved for every 10°C rise in temperature) and concentration of organic materials in the water (i.e. the higher the concentration of organic matter, the higher the LC₅₀ value). The efficacy of E.milii latex as a molluscicide can be modified by factors such as water temperature and concentration of organic materials, and to a lesser extent by snail size.     

Sulphur Gas Analysis in the Pulp and Paper Industry

Various techniques of determining total reduced sulphur (TRS) gases that are emitted in the manufacture of pulp and paper, particularly in the kraft pulping process, are reviewed. Particular emphasis is placed on two types of popular TRS analyzers used in Canada, viz. coulometers and gas chromatographs, with a discussion on the automation of the latter.     

Perfluorinated alkylated substances in vegetables collected in four European countries; occurrence and human exposure estimations

The human diet is recognised as one possible major exposure route to the overall perfluorinated alkylated substances (PFAS) burden of the human population, resulting directly from contamination of dietary food items, as well as migration of PFAS from food packaging or cookware. Most European countries carry out national monitoring programs (food basket studies) to monitor contamination with pollutants. Usually, for PFASs, non-coordinated approaches are used in Europe, since food basket studies are mainly carried out by national authorities following national requirements and questions, making comparisons between different countries difficult. A harmonised sampling campaign collecting similar food items in a uniform procedure enabling direct comparison between different regions in Europe was designed. We selected four countries (Belgium, Czech Republic, Italy and Norway), representing the four regions of Europe: West, East, South and North. In spring 2010 and 2011, 20 different types of vegetables were sampled in Belgium, Czech Republic, Italy and Norway. Perfluorinated carboxylic acids (PFCAs) were the main group of detected PFASs, with perfluorinated octanoic acid (PFOA) as the most abundant PFCA (with exception of samples from Czech Republic), followed by perfluorinated hexanoic acid and perfluorinated nonanoic acid. Dietary intake estimates for PFOA show only low human exposure due to vegetable consumption for adults and children, mostly governed by high intake of potatoes.     

Using iron-loaded sepiolite obtained by adsorption as a catalyst in the electro-Fenton oxidation of Reactive Black 5

This study explores the possibility of using iron-loaded sepiolite, obtained by recovering iron from polluted water, as a catalyst in the electro-Fenton oxidation of organic pollutants in textile effluents. The removal of iron ions from aqueous solution by adsorption on sepiolite was studied in batch tests at iron concentrations between 100 and 1,000 ppm. Electro-Fenton experiments were carried out in an electrochemical cell with a working volume of 0.15 L, an air flow of 1 L/min, and 3 g of iron-loaded sepiolite. An electric field was applied using a boron-doped diamond anode and a graphite sheet cathode connected to a direct current power supply with a constant potential drop. Reactive Black 5 (100 mg/L) was selected as the model dye. The adsorption isotherms proved the ability of the used adsorbent. The removal of the iron ion by adsorption on sepiolite was in the range of 80–100 % for the studied concentration range. The Langmuir and Freundlich isotherms were found to be applicable in terms of the relatively high regression values. Iron-loaded sepiolite could be used as an effective heterogeneous catalyst for the degradation of organic dyes in the electro-Fenton process. Successive batch processes were performed at optimal working conditions (5 V and pH 2). The results indicate the suitability of the proposed combined process, adsorption to iron remediation followed by the application of the obtained iron-loaded sepiolite to the electro-Fenton technique, to oxidize polluted effluents.     

Levels of organochlorine pesticides in Amazon turtle (Podocnemis unifilis) in the Xingu River,Brazil

Abstract

Due to the toxicity and high environmental persistence of organochlorine pesticides in aquatic organisms, turtles have been studied as environment biomonitors. These animals are important sources of protein for the riverside and indigenous peoples of the Brazilian amazon. In the present study, organochlorine pesticide contamination was investigated in Podocnemis unifilis. Liver, muscle and fatty tissue samples were removed from 50 specimens collected from five sampling points located in the Xingu River basin. Fourteen organochlorine pesticides were analysed via gas chromatography with an electron capture detector (CG-ECD). Eight organochlorine pesticides were detected with average concentrations of ∑DDT, ∑Endossulfan and ∑HCH which were 26.17?±?26.35, 14.38?±?23.77 and 1.39?±?8.46?ng g^?1 in moisture content, respectively. DDT compounds were the most predominant, with a greater concentration of pp′-DDT in the liver and pp′-DDD in the muscle. Significant differences were noted between the types of tissues studied, and the concentration of OCPs varied between sampling sites.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Vehicle routing for the eco-efficient collection of household plastic waste

Plastic waste is a special category of municipal solid waste. Plastic waste collection is featured with various alternatives of collection methods (curbside/drop-off) and separation methods (source-/post-separation). In the Netherlands, the collection routes of plastic waste are the same as those of other waste, although plastic is different than other waste in terms of volume to weight ratio. This paper aims for redesigning the collection routes and compares the collection options of plastic waste using eco-efficiency as performance indicator. Eco-efficiency concerns the trade-off between environmental impacts, social issues and costs. The collection problem is modeled as a vehicle routing problem. A tabu search heuristic is used to improve the routes. Collection alternatives are compared by a scenario study approach. Real distances between locations are calculated with MapPoint. The scenario study is conducted based on real case data of the Dutch municipality Wageningen. Scenarios are designed according to the collection alternatives with different assumptions in collection method, vehicle type, collection frequency and collection points, etc. Results show that the current collection routes can be improved in terms of eco-efficiency performance by using our method. The source-separation drop-off collection scenario has the best performance for plastic collection assuming householders take the waste to the drop-off points in a sustainable manner. The model also shows to be an efficient decision support tool to investigate the impacts of future changes such as alternative vehicle type and different response rates.     

The Historical Dynamics of Social–Ecological Traps

Environmental degradation is a typical unintended outcome of collective human behavior. Hardin’s metaphor of the “tragedy of the commons” has become a conceived wisdom that captures the social dynamics leading to environmental degradation. Recently, “traps” has gained currency as an alternative concept to explain the rigidity of social and ecological processes that produce environmental degradation and livelihood impoverishment. The trap metaphor is, however, a great deal more complex compared to Hardin’s insight. This paper takes stock of studies using the trap metaphor. It argues that the concept includes time and history in the analysis, but only as background conditions and not as a factor of causality. From a historical–sociological perspective this is remarkable since social–ecological traps are clearly path-dependent processes, which are causally produced through a conjunction of events. To prove this point the paper conceptualizes social–ecological traps as a process instead of a condition, and systematically compares history and timing in one classic and three recent studies of social–ecological traps. Based on this comparison it concludes that conjunction of social and environmental events contributes profoundly to the production of trap processes. The paper further discusses the implications of this conclusion for policy intervention and outlines how future research might generalize insights from historical–sociological studies of traps.