Effect of formaldehyde on biofilm activity and morphology in an ultracompact biofilm reactor for carbonaceous wastewater treatment.

The effects of formaldehyde on biofilm morphology and biomass activity were investigated in an ultracompact biofilm reactor (UCBR) for carbonaceous wastewater treatment. The wastewater contained a fixed amount of glucose (with a chemical oxygen demand concentration of 600 mg/L) and an increasing concentration of formaldehyde (ranging from 21.4 to 271.1 mg/L). An influent formaldehyde concentration higher than 75 mg/L could facilitate filamentous growth (on biofilm) control and lead to a higher biofilm density, which is desirable as it enhanced the UCBR performance stability. However, at an influent formaldehyde concentration higher than 214.4 mg/L, biomass production was inhibited and deteriorations of biofilm morphology and biomass activity were observed. This study showed that it was desirable to maintain an influent formaldehyde concentration lower than 202.2 mg/L, as this concentration could achieve a good biofilm morphology while not inhibiting its microbial activity.     

Individual PCBs as predictors for concentrations of non and mono-ortho PCBs in human milk

32 Dutch human milk samples were analyzed for PCBs with either HRGC-ECD or HRGC-LRMS in the NCI mode. Samples were collected from three different locations in The Netherlands: Amsterdam, Rotterdam and Groningen. Quantitatively, no differences could be observed between the three localities, while in addition the congener specific pattern showed a striking similarity for all individual samples. Only principal component analysis revealed slight individual differences. Based on similarities in the PCB profiles, linear relationships were calculated between 2,3′4,4′,5-PnCB (#118) or 2,2′4,4′5,5′HxCB (#153) and the most relevantnon andmonoortho PCBs exhibiting dioxinlike activity. These PCBs included 2,3,3′,4,4′-PnCB (#105), 3,3′,4,4′5-PnCB (#126) 2,3,3′,4,4′,5-HxCB (#156), 2,3,3′,4,4′,5′-HxCB (#157), 2,3′,4,4′,5,5′-HxCB (#167) and 3,3′,4,4′,5′5-HxCB (#169). Good linear relationships were observed between individual PCBs. Based on the results of this study, PCB #118 can be used to predict concentrations of the PCBs #105 and #126. PCB #153 can be used as a predictor for the PCBs #156, #157, #167 and #169, but also for the total toxic equivalencies (TEQs) ofnon andmonoortho PCBs present in human milk. This method using certain PCBs as predictors for other toxicological relevant congeners, can be useful and cost effective, e.g. for epidemiological studies. However, before applied a number of conditions should be met. These are:

1. A stable composition of the PCB matrix should be established.
2. A possible time dependent change in composition of the matrix should first be excluded when used over different time periods.

     

Intercomparison of reactive transport models applied to UO2 oxidative dissolution and uranium migration

Oxidative dissolution of uranium dioxide (UO₂) and the subsequent migration of uranium in a subsurface environment and an underground waste disposal have been simulated with reactive transport models. In these systems, hydrogeological and chemical processes are closely entangled and their interdependency has been analyzed in detail, notably with respect to redox reactions, kinetics of mineralogical evolution and hydrodynamic migration of species of interest.Different codes, where among CASTEM, CHEMTRAP and HYTEC, have been used as an intercomparison and verification exercise. Although the agreement between codes is satisfactory, it is shown that the discretization method of the transport equation (i.e. finite elements (FE) versus mixed-hybrid FE and finite differences) and the sequential coupling scheme may lead to systematic discrepancies.     

Solvent and surfactant enhanced solubilization, stabilization, and degradation of amitraz

In an effort to help with the development of effective dip vat management and waste disposal strategies this study determined how solution properties such as pH, buffer composition, ionic strength, temperature, solubility in organic solvents and the addition of commonly used solubilizing agents influenced the hydrolysis of amitraz. Amitraz degrade by means of hydrolysis described by a pseudo-first order rate process and a type ABCD pH rate profile. Hydrolysis increased with temperature and was fastest at low pH, slowest at neutral to slightly alkaline pH, and slightly increased above pH 10. However, buffer concentration and ionic strength influenced the hydrolysis rate and had to be accounted for before constructing a pH rate profile. Hydrolysis seems to depend on the dielectric constant of solvent mixtures and was fastest in water, slower in propylene glycol and ethanol solutions, and slowest in DMSO mixtures. In surfactant solutions, anionic micelles enhanced and cationic micelles retarded the hydrolysis rate. The magnitude of micellar effects decreased with increasing concentrations of the surfactants. The increased solubility and faster hydrolysis of amitraz in the sodium lauryl sulfate solutions showed that anionic surfactants potentially could be used for cleaning up amitraz spills, because it both solubilized the drug and catalyzed hydrolysis.     

Urban heat indicator map for climate adaptation planning

By 2050, 75 % of the world’s population will live in cities and the occurrence of heat wave events might have doubled. Mapping the climate and land use change impact for urban heat events should set the agenda for adaptation planning at the local scale. Literature on urban heat mapping does not reveal a clear indicator to visualise the urban heat impacts that includes consequences of land use and climate changes for planning purposes. This paper introduces a stepwise approach to develop a single complex indicator to map the urban heat impact for local climate adaptation planning processes. Information on climatic drivers and land use characteristics are combined and projected for future land use and climate change impacts. Next, several visualisation techniques are developed to investigate which techniques are most effective to visualise complex information with multiple variables in one visualisation. A usability test is performed to investigate how indicator and map meet the information and communication needs of policy makers. Our findings reveal that it is important to add information on future impacts to set the agenda for adaptation planning at the local scale. Applying cartographic techniques in a map series presentation has proven to be effective to map complex information in a single image and fulfil most of the identified information needs. Based on our finding, we introduce the information enrichment chain as a promising approach to support local adaptation planning.     

污水磷回收新产物——蓝铁矿

渐行渐近的磷危机使磷回收从理论已经走向实践.磷回收产物形式很多,但经济、具有高附加值的产物才能驱动企业自愿实施.在污水处理生物污泥中新近发现的蓝铁矿(Vivianite,Fe_3(PO_4)_2·8H_2O)沉淀物因潜在的特殊用途以及经济价值而备受关注.自然界,蓝铁矿广泛存在于地表水体沉积物中,是一种非常稳定(K_(sp)=10~(-36))的磷铁化合物.决定蓝铁矿生成的条件除富铁、富磷之内在因素外,还需要环境中存在合适的还原性条件(ORP-300 mV)以及中性上下的pH条件(6～9).实践中,污水或污水处理过程中有时刚好存在蓝铁矿形成的内、外在条件,荷兰污水处理厂在生物污泥中便检测发现有蓝铁矿物质的存在.为推动蓝铁矿基础及其应用研究,本文综述蓝铁矿化学性质、经济价值及回收潜力;分析pH、ORP、微生物、硫化物等环境影响因素;辨析其在生物污泥中的生成路径;提出从污泥中分离、提纯蓝铁矿的研发思路.