Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

环境保护因素对落后地区旅游开发的促进作用研究

为了提高落后地区旅游开发的质量,分别从低碳环保旅游以及生态旅游两方面,研究环保因素对落后地区旅游开发的促进作用。提出低碳环保旅游,并分析低碳环保对落后地区旅游业可持续发展的意义,在落后地区旅游开发中实施低碳饮食、低碳住宿、低碳交通以及低碳能源的旅游开发模式。对中国落后地区生态旅游现状和意义实施研究,分析生态旅游对落后地区旅游开发的促进作用。最终给出了落后地区实现生态旅游开发的建议,构建落后地区低碳环保的新型生态旅游模式,实现落后地区旅游的可持续发展。     

A study on the interactions among several plant secondary compounds and aphids

The research, focused on the specific interactions among seven plant secondary compounds and aphids, was carried out and the preliminary results showed: (1) "T-typed tube method" was regarded as the best method compared with others designed to observe the interactions. (2) Cabbage aphid was able to be attracted by laurolene while it was not susceptible to α-pinene, β-pinene and diamylene. (3) Gossypol, a major secondary substance in cotton, was able to be implicated as feeding attractant to cotton aphid. (4) Rutin might be implicated repellent to cotton aphid.     

Determination of Trace Organochlorinated Pesticides and Polychlorinated Biphenyls in Water

A modified steam distillation liquid-liquid extraction (SDE) device is developed for the enrichment of trace organochlorinated pesticides (OCPs) and polychlorinated biphenyls (PCBs) in up to one litre of water samples. One ml of n-hexane is sufficient to extract the analytes. The extract can be analysed directly by a capillary gas chromatography-electron capture detector. The recoveries range from 84.6 to 102.3% for OCPs and 80.5 to 106.2% for PCBs, respectively. Matrice materials such as lipids and humic substances were removed by the SDE method from the extract and no further cleanup and concentration steps were needed.     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

内蒙古发展循环经济的方向与政策初探

本文从内蒙古资源、经济与环境问题现状出发，分析了发展循环经济的必要性、紧迫性和可行性，提出了我区建立循环经济的发展战略应考虑的基本原则，发展方向和法律、政策方面的建议。     

硫酸法钛白生产水洗工序清洁生产技术初探

通过开展水洗工段用水审计并试验了温度、偏钛酸ξ电位和漂白工艺对水洗的影响效果，从实践和理论上探讨了为其提高钛白质量改进水洗工艺的清洁生产方案的可行性和合理性。     

温差拉深法在制造大型杯形件中的应用

用温差拉深法制造大型杯形件毛坯,可避免毛坯拉断和起皱,最大限度地降低拉深系数、减少拉深次数、降低加工成本。     

薄壁深孔件拉深过程的数值模拟

利用上限元技术(UBET)模拟出薄壁深孔件在变薄拉深成形过程中，几种主要工艺参数对断裂的影响程度，由此得出防止断裂产生的措施。