Consolidation of degraded ornamental porous limestone stone by calcium carbonate precipitation induced by the microbiota inhabiting the stone

Although it has already been shown that calcareous stone can be consolidated by using a bacterially inoculated culture medium, a more user-friendly method is the in situ application of a sterile culture medium that is able to activate, among the microbial community of the stone, those bacteria with a potential for calcium carbonate precipitation. In order to test this new method for stone consolidation, non-sterilized decayed porous limestone was immersed in sterile nutritional media. Results were compared to those of the runs in which stone sterilized prior to the treatment was used. The effects of the microbial community on stone consolidation were determined by recording the evolution of the culture media chemistry. The treated stone was tested for mechanical resistance and porosity. Results demonstrate that the tested media were able to activate bacteria from the microbial community of the stone. As a consequence of the growth of these bacteria, an alkalinization occurred that resulted in calcium carbonate precipitation. The new precipitate was compatible with the substrate and consolidated the stone without pore plugging. Therefore, a good candidate to in situ consolidate decayed porous limestone is the application of a sterile culture medium with the characteristics specified in the present study.     

Chromatographic retention-activity relationships for prediction of the toxicity pH-dependence of phenols

An investigation of the use of the chromatographic retention (log k) as an in vitro approach for modeling the pH-dependence of the toxicity to Guppy of phenols is developed. A data set of 19 phenols with available experimental toxicity-pH data was used. The importance of the mechanism of toxic action (MOA) of phenols was studied. log k data at three pH values were used for the phenols classification and two groups or 'MODEs' were identified. For one 'MODE' a quantitative retention-activity relationship (QRAR) model was calculated. Finally, the model was used to assess the toxicity to Guppy of phenols at different pH values. The results of this investigation suggest that chromatographic retention data allows fish toxicity modeling, in the 5.5-8 pH range of interest.     

Behavior of selected priority organic pollutants in horizontal subsurface flow constructed wetlands: a preliminary screening

A discrete injection experiment was carried out in a constructed wetland to evaluate the behavior of selected priority pollutants. A horizontal subsurface flow pilot plant located in the NE of Spain was selected for this study. A total of eight European Priority Pollutants listed in the Water Framework Directive were considered, including a commonly used herbicide (mecoprop). The pollutants encompassed a variety of chemical classes and physicochemical properties. They included organochlorine, organophosphorus, phenols, chloroacetanilides, triazine, phenoxycarboxylic acid and phenylurea pesticides. A time series of composite effluent samples and discrete gravel bed samples from the wetland were analyzed. Response curves for all the pollutants injected from effluent concentrations were obtained and compared with the tracer (clofibric acid). On the basis of an analysis of the samples taken 21 days after the injection, priority pollutants were classified into four groups according to their removal efficiency. These groups were (i) the highly efficiently removed (>90%), namely lindane, pentachlorophenol, endosulfan and pentachlorobenzene; (ii) the efficiently removed (80-90%), namely alachlor and chlorpyriphos; (iii) poorly removed (20%), namely mecoprop and simazine; and (iv) recalcitrant to elimination, namely clofibric acid and diuron. Taking into account the poor accumulation of the injected contaminants in the gravel bed (0-20%), biodegradation and plant uptake are postulated as the most likely elimination pathways for the pollutants.     

Fine and coarse particulate matter chemical characterization in a heavily industrialized city in central Mexico during Winter 2003

This paper presents the results of the first reported study on fine particulate matter (PM) chemical composition at Salamanca, a highly industrialized urban area of Central Mexico. Samples were collected at six sites within the urban area during February and March 2003. Several trace elements, organic carbon (OC), elemental carbon (EC), and six ions were analyzed to characterize aerosols. Average concentrations of PM with aerodynamic diameter of less than 10 microm (PM10) and fine PM with aerodynamic diameter of less than 2.5 microm (PM2.5) ranged from 32.2 to 76.6 [g m(-3) and 11.1 to 23.7 microg m(-3), respectively. OC (34%), SO4= (25.1%), EC (12.9%), and geological material (12.5%) were the major components of PM2.5. For PM10 geological material (57.9%), OC (17.3%), and SO4= (9.7%) were the major components. Coarse fraction (PM,, -PM2.5), geological material (81.7%), and OC (8.6%) were the dominant species, which amounted to 90.4%. Correlation analysis showed that sulfate in PM2.5 was present as ammonium sulfate. Sulfate showed a significant spatial variation with higher concentrations to the north resulting from predominantly southwesterly winds above the surface layer and by major SO2 sources that include a power plant and refinery. At the urban site of Cruz Roja it was observed that PM2.5 mass concentrations were similar to the submicron fraction concentrations. Furthermore, the correlation between EC in PM2.5 and EC measured from an aethalometer was r(2) = 0.710. Temporal variations of SO2 and nitrogen oxide were observed during a day when the maximum concentration of PM2.5 was measured, which was associated with emissions from the nearby refinery and power plant. From cascade impactor measurements, the three measured modes of airborne particles corresponded with diameters of 0.32, 1.8, and 5.6 microm.     

A vehicle emissions system using a car simulator and a geographical information system: Part 1--System description and testing

A methodology for estimating vehicular emissions comprising a car simulator, a basic traffic model, and a geographical information system is capable of estimating vehicle emissions with high time and space resolution. Because of the extent of the work conducted, this article comprises two sections: In Part 1 of this work, we describe the system and its components and use examples for testing it. In Part 2 we will study in more detail the emissions of the sample fleet using the system and will make comparisons with another emission model. The experimental data for the car simulator is obtained using on-board measuring equipment and laboratory Fourier transform IR (FTIR) measurements with a dynamometer following typical driving cycles. The car simulator uses this data to generate emission factors every second. These emission factors, together with information on car activity and velocity profiles of highways and residential and arterial roads in Mexico City in conjunction with a basic traffic model, provide emissions per second of a sample fleet. A geographical information system is used to localize these road emissions.     

The efficiency of electrocoagulation in treating wastewater from a dairy industry, part I: iron electrodes

Iron electrodes were used for electrocoagulation (EC) treatment of wastewater from a dairy plant. Electrolysis time, pH, current density and distance between electrodes were considered to assess the removal efficiency of chemical oxygen demand (COD), total solids (TS) and their fractions and turbidity. Samples were collected from the effluent of a dairy plant using a sampling methodology proportional to the flow. The treatments were applied according to design factorial of half fraction with two levels of treatments and three repetitions at the central point. The optimization of parameters for treating dairy industry effluent by electrocoagulation using iron electrodes showed that electric current application for 15 minutes, an initial sample pH close to neutral (pH 7.0) and a current density of 50 A (.)(m-2) resulted in a significant reduction in COD by 58 %; removal of turbidity, suspended solids and volatile suspended solids by 95 %; and a final treated effluent pH of approximately 9.5. Negative consequences of the type of electrode used were the emergence of an undesirable color and an increase in the proportion of dissolved solids in the treated effluent.     

Effects of mussel shell addition on the chemical and biological properties of a Cambisol

The use of a by-product of the fisheries industry (mussel shell) combined with cattle slurry was evaluated as soil amendment, with special attention to the biological component of soil. A wide number of properties related to soil quality were measured: microbial biomass, soil respiration, net N mineralization, dissolved organic carbon, dissolved organic nitrogen, dissolved inorganic nitrogen, dehydrogenase, β-glucosidase, urease and phosphomonoesterase activities. The amendments showed an enhancement of soil biological activity and a decrease of aluminium held in the cation exchange complex. No adverse effects were observed on soil properties. Given that mussel shells are produced in coastal areas as a by-product and have to be managed as a waste and the fertility constraints in the local soils due to their low pH, our research suggest that there is an opportunity for disposing a residue into the soil and improving soil fertility.     

Global distribution of a key trophic guild contrasts with common latitudinal diversity patterns

Most hypotheses explaining the general gradient of higher diversity toward the equator are implicit or explicit about greater species packing in the tropics. However, global patterns of diversity within guilds, including trophic guilds (i.e., groups of organisms that use similar food resources), are poorly known. We explored global diversity patterns of a key trophic guild in stream ecosystems, the detritivore shredders. This was motivated by the fundamental ecological role of shredders as decomposers of leaf litter and by some records pointing to low shredder diversity and abundance in the tropics, which contrasts with diversity patterns of most major taxa for which broad-scale latitudinal patterns haven been examined. Given this evidence, we hypothesized that shredders are more abundant and diverse in temperate than in tropical streams, and that this pattern is related to the higher temperatures and lower availability of high-quality leaf litter in the tropics. Our comprehensive global survey (129 stream sites from 14 regions on six continents) corroborated the expected latitudinal pattern and showed that shredder distribution (abundance, diversity and assemblage composition) was explained by a combination of factors, including water temperature (some taxa were restricted to cool waters) and biogeography (some taxa were more diverse in particular biogeographic realms). In contrast to our hypothesis, shredder diversity was unrelated to leaf toughness, but it was inversely related to litter diversity. Our findings markedly contrast with global trends of diversity for most taxa, and with the general rule of higher consumer diversity at higher levels of resource diversity. Moreover, they highlight the emerging role of temperature in understanding global patterns of diversity, which is of great relevance in the face of projected global warming.     

Application of multivariate statistical techniques to evaluation of water quality in the Mała Wełna River (Western Poland)

The paper presents the results of determinations of physico-chemical parameters of the Ma?a We?na waters, a river situated in Wielkopolska voivodeship (Western Poland). Samples for the physico-chemical analysis were taken in eight gauging cross-sections once a month between May and November 2006. To assess the physico-chemical composition of surface water, use was made of multivariate statistical methods of data analysis, viz. cluster analysis (CA), factor analysis (FA), principal components analysis (PCA), and discriminant analysis (DA). They made it possible to observe similarities and differences in the physico-chemical composition of water in the gauging cross-sections, to identify water quality indicators suitable for characterising its temporal and spatial variability, to uncover hidden factors accounting for the structure of the data, and to assess the impact of man-made sources of water pollution.     

Mercury in an ultraoligotrophic North Patagonian Andean lake(Argentina):Concentration patterns in different components of the water column

The deep, ultraoligotrophic piedmont lakes of Northern Patagonia (Argentina) are located in pristine and barely impacted areas, along a wide latitudinal range. Several studies have reported moderate to high total mercury (Hg) concentrations and contrasting methylmercury (CH3Hg+) production in different lake compartments. Sources of Hg for western Patagonian terrestrial and aquatic ecosystems are still not clear; while point sources can be ruled out and atmospheric deposition is a plausible source, along with contribution from active volcanic areas of the Andes. In this investigation, we reported a noticeably seasonal, spatial (between lake branches), and vertical (between water column strata) heterogeneity in the total Hg concentrations found in the pelagic zone of Lake Moreno. Sterile water samples taken in a depth profile of the lake showed moderate to high concentrations of CH3Hg+ in autumn with a decreasing trend with depth. Our results indicated that Hg is largely allocated in the plankton fraction between 10–53 μm; which dominated within the euphotic (epilimnetic) zone of the lake due to the high densities attained by two species of the dinoflagellate Gymnodinium. The 53–200 μm planktonic size fraction (comprising rotifers, ciliates and immature stages of crustaceans) and the 200 μm fraction (calanoid copepods and cladocerans) were found to bear strikingly lower total Hg concentrations, suggesting that the magnification of Hg at the planktonic consumer level is negligible.