Preformed Amide-containing biopolymer for Improving the Environmental Performance of Synthesized Urea–formaldehyde in Agro-fiber Composites

Investigations have continued for production high performance agro-based composites using environmentally acceptable approaches. This study examines the role of adding amide-containing biopolymers during synthesis of urea–formaldehyde (UF) on properties of adhesive produced, especially its adhesion potential. The environmental performance of UF-resin synthesized in the presence of modified amide-containing biopolymer was evaluated by evaluating the free-HCHO of both adhesive (during processing) and of the eventual engineered composite product. Also, the benefits of this synthesis-modified adhesive in enhancing the bondability of sugar-cane fibers used in engineered composite panels was evaluated and compared to using UF-resin. The results obtained show that, static bending of the produced composites varied from 27.7 to 33.13 N/mm² of modulus of rupture (MOR) and from 2860 to 3374 N/mm² of Modulus of Elasticity (MOE); while for internal bond (IB) it’s varied from 0.64 to 0.866 N/mm². Based on the ANSI and EN Standards modified UF-based agro composites produced meet the performance requirements for high grade particleboards with respect to static bending strength. These agro-based composite also tested out as having free-HCHO values of ~13 mg/100 g board.     

Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of the Particle-Reinforced Composites

The study was carried out to investigate the effects of filler content and two different compatibilizing agents (Eastman G-3003 and G-3216) on the mechanical properties of polypropylene reinforced with corn stalk and wood flour. In the sample preparation, three levels of filler loading (30, 40 and 50 wt%) and one level of compatibilizing agent content (2.5 wt%) were used. For overall trend, with addition of both grades of the compatibilizing agents, tensile and flexural properties of the composites significantly improved, as compared with the pure PP. Tensile and flexural properties reach a maximum at 40 wt% filler content and gradually decrease with a further increase in wood particle content. The composites treated with G-3003 gave better results in comparison with G-3216. This could be caused by the high melt viscosity of G-3003. In general, corn stalk flour filled composites showed superior mechanical properties.     

Preparation and Characterization of Clay Nanocomposites of Plasticized Starch and Polypropylene Polymer Blends

Plasticized starch (PLS) is a renewable, degradable, and inexpensive polymer, but it suffers from poor mechanical properties. The mechanical properties can be improved by blending PLS with polyolefins, nonetheless, at high PLS content, the mechanical properties remain poor. Here we show that addition of clay can greatly improve the mechanical properties of PLS/polypropylene blends at high starch content. Unmodified and organically modified montmorillonite clays, MMT and Cloisite 30B respectively, were added to blends of glycerol-plasticized starch and polypropylene, compatibilized using maleated polypropylene. TEM indicates that MMT is well dispersed in the PLS phase of the blends, while Cloisite 30B is located both within the PLS phase as well as at the interface between PLS and PP. At high PLS content, the addition of clay increased the tensile strength and tensile modulus by an order of magnitude, while reducing the ultimate elongation only slightly. Such improvements are attributable to both the addition of clay as a reinforcing component, as well as to the change in the two phase morphology due to addition of clay.     

Climate change impacts on vegetation and water cycle in the Euro-Mediterranean region,studied by a likelihood approach

Scientific community and policy-makers share the common interest in identifying and evaluating potential impacts of climate change on ecosystems, relying mainly on probabilistic methods of exploring the risks. In this perspective, the concept of ensemble forecasting makes possible to handle uncertainties associated with climate risk analysis by focusing on a range of potential or probable impact scenarios rather than actualizing a single case. In this paper, an ensemble of simulations based on the Lund-Potsdam-Jena (LPJ) model was used to investigate the uncertainty upon predictions of the future Euro-Mediterranean vegetation distribution, carbon dynamics, and water budget. Twenty simulations from past to future were based on the combination of different climate inputs, vegetation model parameterizations, and configurations. The evaluation of results combined the separate deterministic future projections from the LPJ model into a single probabilistic projection, associating a likelihood degree in accordance with the most recent Intergovernmental Panel on Climate Change terminology. Results projected a general critical situation in terms of water availability, made more serious if considering that also the occurrence of extreme-related events, e.g., fires, is expected to become more frequent as favored by more recurrent drought episodes. Although more uncomfortable climate conditions were projected for vegetation, net primary production (NPP) was predicted to increase due to the potential enrichment of CO₂ in atmosphere and its fertilization effects on vegetation. The combination of rising NPP and fire frequency may shape the carbon cycle components, as the carbon losses by fire also were projected to increase.     

Model projected heat extremes and air pollution in the eastern Mediterranean and Middle East in the twenty-first century

The eastern Mediterranean and Middle East, a region with diverse socioeconomic and cultural identities, is exposed to strong climatic gradients between its temperate north and arid south. Model projections of the twenty-first century indicate increasing hot weather extremes and decreasing rainfall. We present model results, which suggest that across the Balkan Peninsula and Turkey climate change is particularly rapid, and especially summer temperatures are expected to increase strongly. Temperature rise can be amplified by the depletion of soil moisture, which limits evaporative cooling, prompted by the waning of large-scale weather systems that generate rain. Very hot summers that occurred only rarely in the recent past are projected to become common by the middle and the end of the century. Throughout the region, the annual number of heat wave days may increase drastically. Furthermore, conditions in the region are conducive for photochemical air pollution. Our model projections suggest strongly increasing ozone formation, a confounding health risk factor particularly in urban areas. This adds to the high concentrations of aerosol particles from natural (desert dust) and anthropogenic sources. The heat extremes may have strong impacts, especially in the Middle East where environmental stresses are plentiful.     

Looking beyond the average agricultural impacts in defining adaptation needs in Europe

The effects of climate change on agriculture are often characterised by changes in the average productivity of crops; however, these indicators provide limited information regarding the risks associated with fluctuations in productivity resulting from future changes in climate variability that may also affect agriculture. In this context, this study evaluates the combined effects of the risks associated with anomalies reflected by changes in the mean crop yield and the variability of productivity in European agro-climatic regions under future climate change scenarios. The objective of this study is to evaluate adaptation needs and to identify regional effects that should be addressed with greater urgency in the light of the risks and opportunities that are identified. The results show differential effects on regional agriculture and highlight the importance of considering both regional average impacts and the variability in crop productivity in setting priorities for the adaptation and maintenance of rural incomes and agricultural insurance programmes.     

Probabilistic impacts of climate change on flood frequency using response surfaces II: Scotland

This paper uses a sensitivity framework approach to look at the probabilistic impacts of climate change on 20-year return period flood peaks, by applying a set of typical response surfaces alongside the probabilistic UK Climate Projections (UKCP09) for 10 river-basin regions over Scotland. The first paper of the pair used the same approach for 10 river-basin regions over England and Wales. This paper develops the methodology for Scotland, by first enabling better estimation of the response type of Scottish catchments. Then, as for England and Wales, the potential range of impacts is shown for different types of catchment in each river-basin region in Scotland, and regional average impact ranges are estimated. Results show clear differences in impacts between catchments of different types and between regions. The Argyll and West Highland regions show the highest impacts, while the North-East Scotland region shows the lowest impacts. The overall ranges are generally smaller for Scotland than England and Wales.     

Levels of household particulate matter and environmental tobacco smoke exposure in the first year of life for a cohort at risk for asthma in urban Syracuse, NY

The Syracuse, NY, AUDIT (Assessment of Urban Dwellings for Indoor Toxics) study was designed to quantify asthma agent levels in the inner-city homes of a birth cohort whose mothers had a diagnosis of asthma. Risk of exposure to particulate matter (PM), particle number and tobacco smoke was assessed in 103 infants' homes. Repeat measurements were made in 44% of the homes. Infants also were examined on a quarterly basis during the first year of life to monitor their respiratory health and urine cotinine levels. Overall geometric mean (GM) values for PM(2.5) of 21.2 μg/m(3) and for PM(10) of 31.8 μg/m(3) were recorded in homes at visit 1. GM values for PM(2.5) and PM(10) in smoking homes were higher at 26.3 and 37.7 μg/m(3), while values in non-smoking homes were 12.7 and 21.2 μg/m(3) respectively. Fifty-four percent of mothers (55/103) smoked at some point in pregnancy (39% smoked throughout pregnancy). Environmental tobacco smoke (ETS) exposure occurred in 68% of homes during the infants' first year. Significant to this study was the size- and time-resolved monitoring of PM at 140 home visits and the classification of PM count data. PM number counts ranged from continuously low levels (little indoor activity) to continuously high counts (constant indoor activity), and recorded apparent instances of prolonged repeated cigarette smoking. Wheezing in the first year of life was recorded for 38% of the infants (39/103). Adjusted logistic regression modeling demonstrated that elevated levels of indoor PM(2.5) (≥ 15 μg/m(3)) were a significant risk factor for infant wheezing after controlling for infant gender, mothers' age and education level, season of home visit and presence of carpeting (OR 4.21; 95% CI 1.36-13.03; p=0.013). An elevated level of the nicotine metabolite cotinine in infant urine also was associated with infant wheezing after adjusting for infant gender, mothers' age and education level (OR 5.10; 95% CI 0.96-27.24; p=0.057). ETS exposure was pervasive in the AUDIT cohort and a risk for developing infants in this urban population.     

Perfluoroalkyl carboxylates and sulfonates and precursors in relation to dietary source tracers in the eggs of four species of gulls (Larids) from breeding sites spanning Atlantic to Pacific Canada

In the present study, we identified and examined the spatial trends, sources and dietary relationships of bioaccumulative perfluorinated sulfonate (PFSA; C(6), C(8), and C(10) chain lengths) and carboxylate (PFCA; C(6) to C(15) chain lengths) contaminants, as well as precursor compounds including several perfluorinated sulfonamides, and fluorotelomer acids and alcohols, in individual eggs (collected in 2008) from four gull species [glaucous-winged (Larus glaucescens), California (Larus californicus), ring-billed (Larus delawarensis) and herring (Larus argentatus) gulls] from 15 marine and freshwater colony sites in provinces across Canada. The pattern of PFSAs was dominated by perfluorooctane sulfonate (PFOS; >89% of ΣPFSA concentration) regardless of egg collection location. The highest ΣPFSA concentrations were found in the eggs collected in the urbanized areas in the Great Lakes and the St. Lawrence River area [Big Chicken Island 308 ng/g ww, Toronto Harbour 486 ng/g ww, and Ile Deslauriers (HG) 299 ng/g ww]. Also, eggs from all freshwater colony sites had higher ΣPFSA concentrations, which were significant (p<0.05) in many cases, compared to the marine sites with the exception of the Sable Island colony in Atlantic Canada off the coast of Nova Scotia. C(6) to C(15) chain length PFCAs were detected in the eggs, although the pattern was variable among the 15 sites, where PFUnA and PFTrA dominated the pattern for most colonies. Like the ΣPFSA, the highest concentrations of ΣPFCA were found in the eggs from Big Chicken Island, Toronto Harbour, Ile Deslauriers (HG), and Sable Island, although not all freshwater sites had higher concentrations compared to marine sites. Dietary tracers [δ(15)N and δ(13)C stable isotopes (SIs)] revealed that PFSA and PFCA exposure is colony dependent. SI signatures suggested that gulls from most marine colony sites were exposed to PFCs via marine prey. The exception was the Mandarte Island colony in Pacific British Columbia, where PFSA and PFCA exposure appeared to be via terrestrial and/or freshwater prey consumption. The same was true for the freshwater sites where egg SIs suggested both aquatic and terrestrial prey consumption as the source for PFC exposure depending on the colony. Both aquatic (marine and freshwater) and terrestrial prey are likely sources of PFC exposure to gulls but exposure scenarios are colony-specific.