低温等离子体与絮凝剂处理印染废水的协同效应

采用低温等离子体和絮凝剂协同处理印染废水.结果表明,染料废水脱色率和COD去除率随输入电压增大和放电时间延长而增加;电极间距、废水初始浓度、通入空气流量等因素对印染废水处理效果也有很大影响;气相中放电效果优于液相中放电,阳极电极在液面以上8mm左右时放电效果最好,在其他条件不变情况下随废水初始浓度和通入空气流量增大废水脱色和COD脱除率先增大再减小,有一最佳峰值.印染废水先经过等离子体处理后再加入絮凝剂处理效果优于先加絮凝剂后放电、仅有等离子体放电的过程.在本实验中初始浓度200mg/L(CODCr初始值572)印染废水在外加电压40kV、放电时间20min、电极间距8mm、通入空气流量16L/h条件下,与絮凝剂PAC相互协同作用可达到96%脱色率、63%COD去除率.     

Optimization of Methods for Detecting Hepatitis A Virus in Food

Hepatitis A virus (HAV) is currently recognized as an important human food borne pathogen, and it is one of the most resistant enteric RNA viruses, is highly infectious, and may lead to widespread outbreaks. The aim of this study was to optimize the methods to detect HAV from artificially contaminated food. To this end, strawberry and lettuce were experimentally contaminated with HAV suspension containing 6 × 10⁶ copies/ml. After contamination, HAV persistence and washing procedure were evaluated at 0, 1, 3, 7, and 9 days of storage. Five elution buffers (PBS (pH 7.4)/0.1% Tween80; 50 mM glycine/3% (wt/vol) beef extract (pH 9.5); PBS (pH 7, 4); 25 mM glycine/0.1 Tween80; and 1 M sodium bicarbonate) were used to elute the virus, and qualitative and quantitative PCR were used for HAV detection. HAV was detected by qualitative and quantitative PCR using any of the five elution buffers, but PBS was the most effective. Even after washing, HAV was detected up to 9 days after contamination by quantitative PCR. Quantitative PCR was more sensitive than qualitative PCR since samples containing viral load lower than 1.4 × 10³ copies/ml could not be detected by qualitative PCR. Quantitative PCR can be used for rapid detection of food borne viruses and will help in the monitoring and control of food borne disease.     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

Evidence of a second gamete fusion after the first cleavage of the zygote in a 47,XX, + 18/70,XXX, + 18 mosaic. A remarkable diploid-triploid discrepancy after CVS

A 70,XXX, +18 karyotype was found by chorionic villus sampling, while the fetal fibroblast culture of the affected fetus revealed a 47,XX,+ 18 karyotype. From several possible mechanisms, we assume that a second gamete fusion occurred after the first cell division of the zygote. According to this interpretation, the mosaicism arose in very early pregnancy (at the two-cell stage). This discrepancy can therefore be explained by selection pressure, due to the differentiation processes in the embryonic tissues.     

First-trimester diagnosis of duodenal stenosis associated with oesophageal atresia

Duodenal stenosis associated with oesophageal atresia was diagnosed by ultrasound at 12 weeks' gestation. The diagnosis was made by recognition of a double bubble sign which was more pronounced when a vaginal transducer was used. Post-abortion autopsy confirmed the diagnosis. Oesophageal and duodenal obstruction in this case had no effect on the amount of amniotic fluid or the alpha-fetoprotein concentration since swallowing and subsequent utilization of amniotic fluid do not occur before 12 weeks of gestation.     

Molecular cytogenetic characterization of marker chromosomes found at prenatal diagnosis

The nature and origin of two de novo small marker chromosomes found at prenatal diagnosis were determined by fluorescence in situ hybridization using chromosome centromere-specific probes and chromosome-specific plasmid libraries. One marker was found in a mosaic state and was shown to be an i(18p). The second marker was characterized as an inv dup(22). We conclude that molecular cytogenetic analysis contributes to the identification of marker chromosomes and therefore facilitates genetic counselling and decision-making for the parents.