低碳沼气工程建设的生态经济效益核算研究——以广西恭城瑶族自治县为例

在全球气候变暖和快速城市化的背景下,农村地区是能源集约消耗的薄弱区域,其经济、社会、生态的可持续发展一直受到制约。沼气工程作为一种清洁用能方式,在优化用能结构、减少环境污染、节约自然资源、增加农民收入和促进农村经济转型等方面具有较大优势。本文选择广西恭城瑶族自治县这一沼气工程建设全国示范县为案例,针对户用8m3沼气池,对施工建设、运营维护和消费利用全生命周期过程中的碳足迹、减排效益、经济收益和生态价值方面进行核算和评价。结果表明在沼气池的建设与正常使用年限内,该县农户通过替代燃煤、柴薪和秸秆等共可减排CO2约1.24×106t。从户用沼气池建设及生产过程的投入产出价值的来看,仅通过节约炊事燃料和沼液沼渣的回收利用就能为每户节约19 877元,为全县带来1.26亿余元的总收益。因此,沼气工程在该地区的建设普及是发展农村低碳经济、走富农之路的有效措施,可为广大西部地区新农村建设提供借鉴。     

A competitive indirect enzyme-linked immunoassay for lead ion measurement using mAbs against the lead-DTPA complex

Immunoassays for quantitative measurement of environmental heavy metals offer several advantages over other traditional methods. To develop an immunoassay for lead, Balb/c mice were immunized with a lead-chelate-protein conjugate to allow maximum exposure of the metal to the immune system. Three stable hybridoma cell lines were obtained through spleen cells fusion with Sp2/0 cells. One cell line, 2A11D11, produced mAbs with preferential selectivity and sensitivity for Pb-DTPA than DTPA, exhibiting an affinity constant of 3.34 ± 0.24 × 10⁹ M⁻¹. Cross reactivity (CR) with other metals were below 1%, except for Fe(III) with a CR less than 5%. This quantitative indirect ELISA for the lead ion was used to detect environmental lead content in local water sources; importantly, the results from the immunoassay were in excellent agreement with those from ICP-MS. Development of immunoassays for metal ions may thus facilitate the detection and regulation of environmental pollution.     

Emission factors and particulate matter size distribution of polycyclic aromatic hydrocarbons from residential coal combustions in rural Northern China

Coal consumption is one important contributor to energy production, and is regarded as one of the most important sources of air pollutants that have considerable impacts on human health and climate change. Emissions of polycyclic aromatic hydrocarbons (PAHs) from coal combustion were studied in a typical stove. Emission factors (EFs) of 16 EPA priority PAHs from tested coals ranged from 6.25 ± 1.16 mg kg^?1 (anthracite) to 253 ± 170 mg kg^?1 (bituminous), with NAP and PHE dominated in gaseous and particulate phases, respectively. Size distributions of particulate phase PAHs from tested coals showed that they were mostly associated with particulate matter (PM) with size either between 0.7 and 2.1 μm or less than 0.4 μm (PM_0.4). In the latter category, not only were more PAHs present in PM_0.4, but also contained higher fractions of high molecular weight PAHs. Generally, there were more than 89% of total particulate phase PAHs associated with PM_2.5. Gas-particle partitioning of freshly emitted PAHs from residential coal combustions were thought to be mainly controlled by absorption rather than adsorption, which is similar to those from other sources. Besides, the influence of fuel properties and combustion conditions was further investigated by using stepwise regression analysis, which indicated that almost 57 ± 10% of total variations in PAH EFs can be accounted for by moisture and volatile matter content of coal in residential combustion.     

Removal of sulfamethoxazole and sulfapyridine by carbon nanotubes in fixed-bed columns

Sulfamethoxazole (SMX) and sulfapyridine (SPY), two representative sulfonamide antibiotics, have gained increasing attention because of the ecological risks these substances pose to plants, animals, and humans. This work systematically investigated the removal of SMX and SPY by carbon nanotubes (CNTs) in fixed-bed columns under a broad range of conditions including: CNT incorporation method, solution pH, bed depth, adsorbent dosage, adsorbate initial concentration, and flow rate. Fixed-bed experiments showed that pH is a key factor that affects the adsorption capacity of antibiotics to CNTs. The Bed Depth Service Time model describes well the relationship between service time and bed depth and can be used to design appropriate column parameters. During fixed-bed regeneration, small amounts of SMX (3%) and SPY (9%) were irreversibly bonded to the CNT/sand porous media, thus reducing the column capacity for subsequent reuse from 67.9 to 50.4 mg g^?1 for SMX and from 91.9 to 72.9 mg g^?1 for SPY. The reduced column capacity resulted from the decrease in available adsorption sites and resulting repulsion (i.e., blocking) of incoming antibiotics from those previously adsorbed. Findings from this study demonstrate that fixed-bed columns packed with CNTs can be efficiently used and regenerated to remove antibiotics from water.     

基于核心企业视角的虚拟生态工业园构建分析

虚拟生态工业园(VEIP)是一种基于循环经济的新型的大循环生态工业组织形式,是对实体生态工业园的补充和扩展.而核心企业作为VEIP的组建者,是整个园区日常运营的信息指挥中枢,对VEIP的成功运营至关重要.分析了核心企业的内涵和应具备的特质,然后从核心企业的视角出发,给出了核心企业构建VEIP的一般流程,并阐述了核心企业在VEIP构建过程中的主要职能.     

基于BP人工神经网络的城市PM2.5浓度空间预测

针对PM2.5日均质量浓度,采用BP人工神经网络模型,预测研究区空气中PM2.5浓度的空间变异,通过与普通克里格(Ordinary Kriging)插值方法对比验证BP人工神经网络预测模型的精度.结果表明:BP人工神经网络预测模型下研究区检验样本点位置的PM2.5仿真浓度与观测浓度之间的均方差、平均绝对误差、平均相对偏差和相关系数分别为0.296 μg2/m6、0.412 μg/m3、1.650％和0.851;而与此同时,普通克里格插值方法下的对应结果分别为1.041 μg2/m6、0.689 μg/m3、11.910％、0.638.研究成果在肯定BP人工神经网络预测模型可用于揭示PM2.5浓度空间变异特征的同时,也证实了其相对于普通克里格插值方法在固定空间点位准确预测PM2.5浓度方面的优势.     

Effects of pH and ionic strength on sulfamethoxazole and ciprofloxacin transport in saturated porous media

Many antibiotics regarded as emerging contaminants have been frequently detected in soils and groundwater; however, their transport behaviors in soils remain largely unknown. This study examined the transport of two antibiotics, sulfamethoxazole (SMZ) and ciprofloxacin (CIP), in saturated porous media. Laboratory columns packed with quartz sand was used to test the effects of solution pH and ionic strength (IS) on their retention and transport. The results showed that these two antibiotics behaved differently in the saturated sand columns. In general, SMZ manifested a much higher mobility than CIP for all experimental conditions tested. Almost all SMZ transported through the columns within one pore volume in deionized water (i.e., pH=5.6, IS=0), but no CIP was detected in the effluents under the same condition after extended column flushing. Perturbations in solution pH (5.6 and 9.5) and IS (0 and 0.1M) showed no effect on SMZ transport in the saturated columns. When pH increased to 9.5, however, ~93% of CIP was eluted from the sand columns. Increase of IS from 0 to 0.1M also slightly changed the distribution of adsorbed CIP within the sand column at pH 5.6, but still no CIP was detected in the effluents. A mathematical model based on advection-dispersion equation coupled with equilibrium and kinetic reactions successfully simulated the transport of the antibiotics in water-saturated porous media with R(2)=0.99.     

Removal of selected endocrine disrupting chemicals and personal care products in surface waters and secondary wastewater by ozonation

This study investigated the removal of parabens, N,N-diethyl-m-toluamide (DEET), and phthalates by ozonation. The second-order rate constants for the reaction between selected compounds with ozone at pH 7 were of (2.2 +/-0.2) X 10(6) to (2.9 +/-0.3) X 10(6) M 1/s for parabens, (2.1+/- 0.3) to (3.9 +/-0.5) M-1/s for phthalates, and (5.2 +/-0.3) M-1/s for DEET. The rate constants for the reaction between selected compounds with hydroxyl radical ranged from (2.49 +/-0.06) x 10(9) to (8.5 +/-0.2) x 10(9) M-1/s. Ozonation of selected compounds in secondary wastewater and surface waters revealed that ozone dose of 1 and 3 mg/L yielded greater than 99% depletion of parabens and greater than 92% DEET and phthalates, respectively. In addition, parabens were found to transform almost exclusively through the reaction with ozone, while DEET and phthalates were transformed almost entirely by hydroxyl radicals (.OH).     

甲基氯硅烷生产废液制备氯化氢和有机硅树脂

研究了将高、低沸点甲基氯硅烷生产废液分别通过醇解和水解反应制备HCl和有机硅树脂的工艺方法,考察了醇解时间、醇解温度和m(废液)∶m(甲醇)等因素对产物收率的影响.实验得到最佳反应条件为:m(废液)∶m(甲醇)=1∶0.5,醇解温度65℃,醇解时间2h.在该条件下由高、低沸点废液制得的有机硅树脂收率分别为43.2％和40.6％.将制得的有机硅树脂经500℃干燥处理后,可作为填料,制备有机硅树脂-聚氯乙烯复合材料.该材料的力学性能与SiO2 -聚氯乙烯复合材料接近.     

直埋式光纤传感钻孔注浆耦合材料配合比试验研究

采用钻孔埋设传感光纤是岩土体分布式光纤传感直埋技术的一种,为使传感光纤与周围土体变形协调,通常在钻孔内注浆,使传感光纤与周围岩土介质凝固为一体。根据对浆液凝固时间无特定要求和有特定要求的2种情况,通过试验研究了钻孔注浆耦合材料、配合比及其凝固后强度。结果表明:通过调整水泥与膨润土的比例以及水固比可以控制凝固体的无侧限抗压强度,使其强度与原位岩土体的近似相同;添加适量的水玻璃可以加快浆液的凝固速度。针对石家庄某隧道原位土体的力学参数,得到了满足现场施工要求的最优配合比,使浆液凝固后的力学指标与原位土体的近似相同。