The efficiency of electrocoagulation in treating wastewater from a dairy industry,Part I: Iron electrodes

Iron electrodes were used for electrocoagulation (EC) treatment of wastewater from a dairy plant. Electrolysis time, pH, current density and distance between electrodes were considered to assess the removal efficiency of chemical oxygen demand (COD), total solids (TS) and their fractions and turbidity. Samples were collected from the effluent of a dairy plant using a sampling methodology proportional to the flow. The treatments were applied according to design factorial of half fraction with two levels of treatments and three repetitions at the central point. The optimization of parameters for treating dairy industry effluent by electrocoagulation using iron electrodes showed that electric current application for 15 minutes, an initial sample pH close to neutral (pH 7.0) and a current density of 50 A ^{. m?2} resulted in a significant reduction in COD by 58 %; removal of turbidity, suspended solids and volatile suspended solids by 95 %; and a final treated effluent pH of approximately 9.5. Negative consequences of the type of electrode used were the emergence of an undesirable color and an increase in the proportion of dissolved solids in the treated effluent.     

Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends

A new route to prepare poly(lactic acid) (PLA)/thermoplastic starch (TPS) blends is described in this work using poly(ethylene glycol) (PEG), a non-toxic polymer, as a compatibilizer. The influence of PEG on the morphology and properties of PLA/TPS blends was studied. The blends were processed using a twin-screw micro-compounder and a micro-injector. The morphologies were analyzed by scanning and transmission electron microscopies and the material properties were evaluated by dynamic-mechanical, differential scanning calorimetry, thermogravimetric analysis and mechanical tests. PLA/TPS blends presented large TPS phase size distribution and low adhesion between phases which was responsible for the lower elastic modulus of this blend when compared to pure PLA. The addition of PEG resulted in the increase of PLA crystallization, due to its plasticizing effect, and improvement of the interfacial interaction between TPS and PLA matrix. Results show that incorporation of PEG increased the impact strength of the ternary blend and that the elastic modulus remained similar to the PLA/TPS blend.     

A rapid bioassay for detecting saxitoxins using a Daphnia acute toxicity test

Bioassays using Daphnia pulex and Moina micrura were designed to detect cyanobacterial neurotoxins in raw water samples. Phytoplankton and cyanotoxins from seston were analyzed during 15 months in a eutrophic reservoir. Effective time to immobilize 50% of the exposed individuals (ET₅₀) was adopted as the endpoint. Paralysis of swimming movements was observed between ∼0.5-3 h of exposure to lake water containing toxic cyanobacteria, followed by an almost complete recovery of the swimming activity within 24 h after being placed in control water. The same effects were observed in bioassays with a saxitoxin-producer strain of Cylindrospermopsis raciborskii isolated from the reservoir. Regression analysis showed significant relationships between ET₅₀vs. cell density, biomass and saxitoxins content, suggesting that the paralysis of Daphnia in lake water samples was caused by saxitoxins found in C. raciborskii. Daphnia bioassay was found to be a sensitive method for detecting fast-acting neurotoxins in natural samples, with important advantages over mouse bioassays.     

Chlorpyrifos causes decreased organic matter decomposition by suppressing earthworm and termite communities in tropical soil

Effects of pesticides on structural and functional properties of ecosystems are rarely studied under tropical conditions. In this study litterbag and earthworm field tests were performed simultaneously at the same tropical field site sprayed with chlorpyrifos (CPF). The recommended dose of CPF (0.6 kg a.i. ha⁻¹) and two higher doses (4.4-8.8 kg a.i. ha⁻¹) significantly decreased litter decomposition during the first 3 months after application, which could be explained from lower earthworm and termite abundances during this period. Species-specific effects of CPF on organism abundance and biomass were observed, with termites being mostly affected followed by the earthworm Perionyx excavatus; the earthworm Megascolex sp. was least affected. Recovery was completed within 6 months. Decomposition in the controls and lowest two treatments was completed within 4 months, which suggests the need for modification of standard test guidelines to comply with faster litter degradation under tropical conditions.     

Soil Biodegradation of PHBV/Peach Palm Particles Biocomposites

There is great interest in developing eco-friendly green biocomposites from plant-derived natural fibers and crop-derived bioplastics attributable to their renewable resource-based origin and biodegradable nature. Fully biodegradable composites, made from both biodegradable polymeric matrices and natural fibers, should be advantageous in some applications, such as one way packaging. Polyhydroxyalkanoates (PHAs) are naturally occurring biodegradable polymers produced from a wide range of microorganisms, with poly(3-hydroxybutyrate) P(3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) being important examples of PHAs. In this work, biocomposites of PHBV consisting of a PHBV matrix incorporating peach palm particles (PPp), [i.e., 100/0, 90/10, 80/20 and 75/25 (%w/w) PHBV/PPp] were processed by injection molding at 160 °C. The effect of PPp loading on the thermal and the mechanical properties, as well as on the morphological behavior of the PHBV/PPp biocomposites was investigated. Soil biodegradation tests were carried out by burying specimen beakers containing aged soil and kept under controlled temperature and humidity in accordance with ASTM G160-98. Degradation of the biocomposites was evaluated by visual analysis, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) following test exposures of up to 5 months. The addition of PPp reduced the maximum strength and the elongation at break of the biocomposites. On the other hand, the Young’s modulus improved with the PPp content. Micrographs of the fracture surfaces following tensile strength testing revealed a large distance between the PHBV matrix and PPp particles although a low interaction is expected. Where measured, these distances tended increase as the PPp content of the biocomposites increased. Soil biodegradation tests indicated that the biocomposites degraded faster than the neat polymer due to the presence of cavities that resulted from introduction of the PPp and that degradation increased with increasing PPp content. These voids allowed for enhanced water adsorption and greater internal access to the soil-borne degrader microorganisms.     

Assessment of DNA damage in Brazilian workers occupationally exposed to pesticides: a study from Central Brazil

We evaluated 41 rural workers occupationally exposed to pesticides and 32 subjects as a control group, using the micronucleus (MN) and the comet assay. For the comet assay, we evaluated the peripheral blood, and for the MN, we sampled cells from the oral epithelium. Damage to DNA was measured by tail length, % DNA in tail (% tail), olive tail moment (OTM), and tail moment (TM). The exposed group presented an 8× increase in MN frequency, when compared to the control group (p <0.05). When we contrasted the MN frequencies between the individuals that use and do not use personal protective equipment, we found a mean of 7.5 MN (57 % variance) and 12.1 MN (130 % variance), respectively. The binucleated cells were 0.04 and 0.005, in the exposed and control groups, respectively, indicating 8× increase in the number of binucleated cells, when comparing the groups (p <0.05). In the comet assay, we demonstrated statistically significant differences in three parameters (% DNA, OTM, and TM) indicating that the rural workers presented high levels of genomic damages. Our results indicate that occupational exposure to pesticides could cause genome damage in somatic cells, representing a potential health risk to Brazilian rural workers that deal constantly with agrochemicals without adequate personal protection equipment.     

Wastewater treatment to enhance the economic viability of microalgae culture

Microalgae culture is still not economically viable and it presents some negative environmental impacts, concerning water, nutrient and energy requirements. In this context, this study aims to review the recent advances on microalgal cultures in wastewaters to enhance their economic viability. We focused on three different culture concepts: (1) suspended cell systems, (2) cell immobilization, and (3) microalgae consortia. Cultures with suspended cells are the most studied. The nutrient removal efficiencies are usually high for wastewaters of different sources. However, biomass harvesting is difficult and a costly process due to the small cell size and lower culture density. On the other hand, the cell immobilization systems showed to be the solution for this problem, having as main limitation the nutrient diffusion from bulk to cells, which results in a reduced nutrient removal efficiency. The consortium between microalgae and bacteria enhances the growth of both microorganisms. This culture concept showed to be a promising technology to improve wastewater treatment, regarding not only nutrient removal but also biomass harvesting by bioflocculation. The aggregation mechanism must be studied in depth to find the process parameters that would lead to an effective and cheap harvesting process.     

The efficiency of electrocoagulation in treating wastewater from a dairy industry, part I: iron electrodes

Iron electrodes were used for electrocoagulation (EC) treatment of wastewater from a dairy plant. Electrolysis time, pH, current density and distance between electrodes were considered to assess the removal efficiency of chemical oxygen demand (COD), total solids (TS) and their fractions and turbidity. Samples were collected from the effluent of a dairy plant using a sampling methodology proportional to the flow. The treatments were applied according to design factorial of half fraction with two levels of treatments and three repetitions at the central point. The optimization of parameters for treating dairy industry effluent by electrocoagulation using iron electrodes showed that electric current application for 15 minutes, an initial sample pH close to neutral (pH 7.0) and a current density of 50 A (.)(m-2) resulted in a significant reduction in COD by 58 %; removal of turbidity, suspended solids and volatile suspended solids by 95 %; and a final treated effluent pH of approximately 9.5. Negative consequences of the type of electrode used were the emergence of an undesirable color and an increase in the proportion of dissolved solids in the treated effluent.     

Solanum nigrum L. weed plants as a remediation tool for metalaxyl-polluted effluents and soils

In this work, the phytoremediation potential of metalaxyl, a commonly used persistent, mobile and leachy fungicide, by Solanum nigrum L. plants was studied. The study revealed that this plant species can be used as an excellent metalaxyl phytoremediation tool, thus providing a cost effective and environmentally friendly clean technology for the decontamination of sites and effluents. As it can be sowed directly in the remediation site, is able to complete its life cycle without suffering major stress. Because it accumulates high amounts of the fungicide in the aboveground tissues, enables its concentration and proper disposal by cutting off the corresponding plant part. The study also suggests that the tolerance to metalaxyl is due to a suitable antioxidant response comprising proline accumulation and guaiacol peroxidase and glutathione-S-transferase enhanced activities, that reduce oxidative damage to the plant organs.     

Diversity of shrub tree layer, leaf litter decomposition and N release in a Brazilian Cerrado under N, P and N plus P additions

This study investigated changes in diversity of shrub-tree layer, leaf decomposition rates, nutrient release and soil NO fluxes of a Brazilian savanna (cerrado sensu stricto) under N, P and N plus P additions. Simultaneous addition of N and P affected density, dominance, richness and diversity patterns more significantly than addition of N or P separately. Leaf litter decomposition rates increased in P and NP plots but did not differ in N plots in comparison to control plots. N addition increased N mass loss, while the combined addition of N and P resulted in an immobilization of N in leaf litter. Soil NO emissions were also higher when N was applied without P. The results indicate that if the availability of P is not increased proportionally to the availability of N, the losses of N are intensified.