Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

Value addition in the services sector and its heterogeneous impacts on CO2 emissions: revisiting the EKC hypothesis for the OPEC using panel spatial estimation techniques

Environmental Science and Pollution Research - This study examines the Environmental Kuznets Curve (EKC) hypothesis in the context of 12 members of the OPEC by utilizing data on both the aggregate...     

Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Monitoring health implications of pesticide exposure in factory workers in Pakistan

The study aimed to determine the hazardous health effects of pesticides exposure in the factory workers by measuring plasma cholinesterase (PChE), pesticides residues, and renal and hepatic biochemical markers. In addition, we also assessed the knowledge, attitudes, and safety practices adopted by the industrial workers. The study was conducted in three different sizes of factories located in Lahore (large), Multan (medium), and Karachi (small) in Pakistan. Total 238 adult males consisting of 184 pesticide industrial workers (exposed group) from large-sized (67), medium-sized (61), small-sized (56) industrial formulation factories, and 54 controls (unexposed) were included in the study. All the participants were male of aged 18 to 58 years. PChE levels were estimated by Ellmann’s method. Plasma pesticides residue analysis was performed by using reverse phase C-18 on high-performance liquid chromatograph and GC with NPD detector. Plasma alanine aminotransferase (ALT), aspartate aminotransferase (AST), creatinine, urea, and gamma glutamyltransferase (GGT) were measured on Selectra E auto analyzer. Plasma and C-reactive protein was analyzed by Immulite 1000. The results revealed a significant decrease in plasma post exposure PChE levels (<30%) as compared to baseline in the workers of small (29%) and medium (8%) industrial units (p?< 0.001). Plasma cypermethrin, endosulfan, imidacloprid, thiodicarb, carbofuran, and methamidophos levels were found to be higher than allowable daily intake. Serum AST, ALT, creatinine GGT, malondialdehyde, total antioxidant, and CRP were significantly raised among the workers of small and medium pesticide formulation factories as compared to large industrial unit and controls (p?< 0.001). The study demonstrated that unsafe practices among small- and medium-sized pesticides industrial workers cause significant increase in pesticide exposure, oxidative stress, and derangement of hepatic and renal function.     

A two-generational reproductive toxicity study of zinc in rats

A two-generation reproductive toxicity study of zinc chloride (ZnCl(2)) was conducted in rats. F(o) male and female rats were administered 0.00 (control), 7.50 (low), 15.00 (mid) and 30.00 (high) mg/kg/day of ZnCl(2). Selected F(1) male and female rats were exposed to the same doses received by their parents (F(o)). Exposure of F(0) parental rats to ZnCl(2) showed significant reduction in fertility, viability (days 0 and 4), and the body weight of F(1) pups from the high-dose group but caused no effects on litter size, weaning index, and sex ratio. Similarly, the continued exposure of F(1) parental rats to ZnCl(2) also reduced fertility, liter size, viability (day 0), and the body weight of F(2) pups within the high-dose group but caused no effects on weaning index and sex ratio. Exposure of ZnCl(2) to F(0) and F(1) parental males resulted in a significant reduction in their body weights, and the F(0) and F(1) parental females did not show any significant difference in their body weights compared to their control groups. However, the postpartum dam weights of both F(0) and F(1) female rats were significantly reduced compared to their controls. Exposure of ZnCl(2) to F(o) and F(1) generation parental rats did not produce any significant change of their clinical signs as well as their clinical pathology parameters, except the alkaline phosphotase (ALK) level, which showed an upward trend in both sexes of both generations. Exposure of ZnCl(2) to F(0) rats resulted in a reduction of brain, liver, kidney, spleen and seminal vesicles weights of males and in the spleen and uterus of females. Similarly, exposure of F(1) rats to ZnCl(2) also resulted in reduction of brain, liver, kidney, adrenal, spleen, prostate and seminal vesicles weights of males and in spleen and uterus of females. ZnCl(2) exposure resulted in grossly observed gastro-intestianla (GI) tract, lymphoreticular/hematopoietic, and reproductive tract lesions in parental rats in both generations. Reduced body fat was also recorded in F(1) parental rats.     

Decision support methods for the environmental assessment of contamination at mining sites

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a ‘holistic’ approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.     

Biosorption of Pb(II) and Cr(III) from aqueous solutions: breakthrough curves and modeling studies

The sorption capacity parameters obtained for batch studies provide useful information about biosorption system. However, such data fail to explain the process under continuous-flow conditions. The present study is an attempt to explore the biosorption of Pb(II) and Cr(III) by straw from local wheat (Triticum aestivum). The biosorbent has been characterized by using Fourier transform infrared spectroscopy and surface area and elemental analyses and found to be porous and polyfunctional. S-shaped breakthrough curves were obtained at different column heights for the both metal ions. Various breakthrough parameters and saturation times have been determined. The column data have been successfully used to study the Bohart–Adams' bed depth service time (BDST) model and Yoon and Nelson's model. It was found that BDST model quite efficiently explained the whole column data whereas Yoon and Nelson model could explain it below 90 % breakthrough concentration. The predicted and calculated BDST parameters were in agreement with each other. Yoon and Nelson's constant decreased with an increase in the column height for both metal ions. Effect of change in flow rate on the Pb(II) biosorption has also been discussed with respect to BDST approach.     

Reservoir water quality: a case from Jordan

Jordan relies heavily on reservoirs building and development to cope with water supply challenges, where monitoring and assessment of reservoir water quality are critically important for the sustainable use of these water supplies. Mujib Dam is an important water supply source in central western Jordan. Evaluation of water quality parameters and their spatial distributions (vertical and horizontal) showed near-neutral pH values with nearly similar values from surface to bottom. The vertical profile of DO and TDS in the dammed reservoir showed slight decreasing trends with increasing depth. Although Ca, Mg, Na, and K concentrations varied slightly with depths, their variations showed no trends. Similarly, the vertical and horizontal distribution patterns of Cl, SO₄, HCO₃, NO₃, and PO₄ in Mujib reservoir water showed insignificant variations in surface water layer and relatively unchanged values or decreasing trends through the water column. Higher values of TN have been observed, especially in the western part, suggesting that agricultural activities and livestock farming in the upstream catchment are impacting water quality. Results revealed that weathering and dissolution of rocks are the major source of water chemistry. The majority of trace metal levels (Cd, Cr, Cu, Fe, Mn, Pb, Zn, Co, Ni, Sr, and B) in water showed relatively similar surface and bottom values. The concentrations of COD and BOD₅ in surface water were relatively low with higher concentrations observed in the northwestern corner, coincided with higher levels of chlorophyll a. The average ratio of TN to TP in surface water suggests that phosphorus is the limiting factor for the algal blooms, whereas the average chlorophyll a level in surface water indicates oligo-mesotrophic water.