No agreement has yet emerged from the negotiations on mineral commodities held under the Integrated Programme for Commodities (IPC), and there is little, if any, prospect for one in the near future. This article examines the reasons for this standstill and the underlying assumptions on which the IPC is based. The following points are raised: the premise that problems of individual commodities are mutually exclusive and can be dealt with in a single framework of measures is shown to be doubtful; the principle of a commodity-by-commodity approach can no longer remain unchallenged; and structural flaws in the negotiating machinery are manifest. However, results of negotiations have not been entirely negative: the need for two-tier preparatory negotiations has been accepted and a case for a permanent consultative body, perhaps covering several commodities, has been made out. Lack of substantive reciprocity, hence political discord, remains the stumbling-block. 相似文献
Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.
Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.
Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature. 相似文献
ABSTRACT: Feasibility of disposing treated sewage in wells sunk into a partially confined coastal limestone aquifer at Waimanalo in the island of Oahu was investigated using an electric analog model. Electric analog modeling was preferred over digital modeling because of ease with which tides could be generated at the ocean boundary in the form of sinusoidal waves. The results of model operation showed that high permeability, low storativity, and the presence of ocean render the Waimanalo aquifer highly suitable for the disposal of waste water in deep wells. Since the quality of water in the aquifer is already unsuitable for municipal, industrial, or agricultural use, waste water injection will not result in any loss of fresh water supply source to the island. It is also believed that the cost of waste water disposal through the aquifer will be considerably less than that through an ocean outfall. During model development it was discovered that electric analog models can help prepare certain graphs which can be useful for aquifer analysis without any further use of the model. 相似文献
ABSTRACT: Two autoregressive models for monthly stream flow generation are compared based on the reproduction of the historical record in terms of several important statistics such as the mean, standard deviation, skewness coefficient, correlation coefficient, and the reservoir storage components. In the comparison, both theoretical considerations and practical applications are employed to evaluate the performance of each model. 相似文献
A spore germination-based concept and its transformation into a field level prototype for monitoring aflatoxin M1 (AFM1) in milk was developed. Initially, 15 strains of Bacillus spp. procured from different culture collection were screened for AFM1 sensitivity using spot assay and marker strain showing inhibition at 0.5 ppb was selected based upon maximum zone of inhibition. The selected strain B. megaterium 2949 was further screened for different enzymes activities and subsequently its spores were produced to an extent of 73.13% ± 3.197% in newly developed sporulation medium containing beef extract (0.0075% ± 0.0004%), yeast extract (0.015% ± 0.001%), peptone (0.0375% ± 0.0016%), and sodium chloride (0.0375% ± 0.0018%). A spore germination-based concept/ assay was optimized by immobilizing spores in eppendorf with pretreated milk (80°C/15 min) containing germinant and chromogenic substrate followed by incubation at 37°C. The appearance of sky blue color within real time of 45 min indicated spores germination and release of specific marker enzyme such as acetyl esterase and its specific action on chromogenic substrate which demonstrates absence of AFM1 in milk. However, if there was no color change, presence of AFM1 at 0.5 ppb MRL was denoted by Codex. The developed concept on AFM1 detection was validated and a correlation of 0.97 was established with AOAC approved Charm 6602 and ELISA at Codex MRL with minimal false positive and negative results. The cost effective test has potential application in dairy farms, manufacturing, and R&D units for routine monitoring of AFM1 in milk. 相似文献
An assignment to carry out a hazard study and risk analysis of a gas processing complex has been described briefly, wherein well known procedures have been used to identify and investigate potential hazards. A method of avoiding unintentional overfilling of LPG storage tanks has been recommended, which utilizes the existing level control instruments. 相似文献
In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10−9 to 10−11 showed no carcinogenic health risk by road dusts contaminated with the heavy metals. 相似文献
Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers’ income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers’ operating costs. 相似文献