Determination of total Cr in wastewaters of Cr electroplating factories in the I.organize industry region (Kayseri, Turkey) by ICP-AES

The wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in the wastewater sources from electroplating, dyeing, and tannery, has affected the life on earth. This pollution can affect on all ecosystems and human health directly or by food chain. Therefore, the determination of total chromium in this study is of great importance. In this study, accurate, rapid, sensitive, selective, simple, and low-cost technique for the direct determination of total Cr in wastewater samples collected from the some Cr electroplating factories in March 2008 by inductively coupled plasma-atomic emission spectrometry has been developed. The analysis of a given sample is completed in about 15 min by this technique applied. As the result of the chromium analysis, the limit of quantification for the total Cr were founded to be over the limit value (0.05 mg L^???1; WHO, EPA, TSE 266, and inland water quality classification) as 1,898.78 ± 0.34 mg/L at station 1 and 3,189.02 ± 0.56 mg/L at station 2. The found concentration of total Cr has been determined to be IV class quality water according to the inland water classification. In order to validate the applied method, recovery studies were performed.     

Food Insecurity in Pakistan: Causes and Policy Response

There is evidence of continued food insecurity and malnutrition in Pakistan despite significant progress made in terms of food production in recent years. According to “Vision 2030” of the Planning Commission of Pakistan, about half of the population in the country suffers from absolute to moderate malnutrition, with the most vulnerable being children, women, and elderly among the lowest income group. The Government of Pakistan has been taking a series of policy initiatives and strategic measures to combat food insecurity issues. These range from increasing production to food imports, implementation of poverty reduction strategies, nutritional improvement programs, as well as provision of social safety nets. The article aims to instill some fresh thinking into the debate regarding the challenges of food security. It underscores the limitations of hitherto policy response, and suggests crucial measures to improve the present grim scenario. Policy makers, planners, practitioners, and academicians in countries with comparable socio-political and economic setup can view this discussion as a case study and may apply the findings in their domain accordingly.     

Sustainable options of post treatment of UASB effluent treating sewage: A review

The upflow anaerobic sludge blanket (UASB) process is reported to be a sustainable technology for domestic wastewaters treatment in developing countries and for small communities. However, the inability of UASB process to meet the desired disposal standards has given enough impetus for subsequent post treatment. In order to upgrade the UASB based sewage treatment plants (STPs) to achieve desired effluent quality for disposal or for reuse, various technological options are available and broadly differentiated as primary post-treatment for the removal of organic and inorganic compounds and suspended matter; secondary post-treatment for the removal of hardly degradable soluble matter, colloidal and nutrients; and polishing systems for removals of pathogens. Hence, this paper discusses the different systems for the treatment of UASB reactor effluent treating sewage. Additionally, a comparative review, an economic evaluation of some of the emerging options was conducted and based on the extensive review of different integrated combination, i.e. UASB-different aerobic systems, a treatment concept based on natural biological mineralization route recognized as an advanced technology to meet all practical aspects to make it a sustainable for environmental protection, resource preservation and recovering maximum resources.     

Performance improvement potential of sensor embedded products in environmental supply chains

Environmental supply chain is a desirable alternative to traditional supply chain due to new and stricter environmental regulations by local governments and increasing consumer awareness towards environmental issues. The two most common types of environmental supply chains are reverse supply chains and closed-loop supply chains. In reverse or closed-loop supply chains, collected used products are subjected to one of four recovery options, viz., reuse, recycling, remanufacturing or disposal. Regardless of the chosen recovery option, all products are disassembled up to some level. However, there is a high level of uncertainty associated with the disassembly yield due to non-functional and/or missing components. Sensor embedded products (SEPs) is a viable approach to cope with this uncertainty since they involve sensors which can detect non-functional and/or missing components prior to disassembly. This study presents a quantitative assessment of the impact of SEPs on the various performance measures of a kanban-controlled disassembly line. First, separate design of experiments studies based on Orthogonal Arrays are carried out for conventional products and SEPs. Then, the results of paired t-tests comparing the two cases based on different performance measures are presented.     

Designing a mixed performance measurement system for environmental supply chain management using evolutionary game theory and balanced scorecard: A case study of an auto industry supply chain

This paper proposes a mixed performance measurement system using a combination of evolutionary game theory and the balanced scorecard (BSC) in environmental supply chain management (ESCM) that measures and evaluates business operations using the four different perspectives of finance, customer, internal business process, and learning and growth. ESCM plays an important role in the supply chain which leads to the reduction, reuse and recycling of resources involved in both upstream and downstream activities. This paper presents guidance for practical managers in evaluating and measuring ESCM by developing a knowledge-based BSC and evolutionary game theory. The primary purpose of this paper is to apply the proposed method in a case study to one of Iran's biggest auto industry supply chain SAIPA Company. The results of this study indicate that the adoption of ESCM, in the absence of regulatory pressures and cost-saving measures is triggered by public pressures and its implementation is limited by organizational factors and strategic myopia.     

Electrocoagulation of palm oil mill effluent as wastewater treatment and hydrogen production using electrode aluminum

Palm oil mill effluent (POME) is highly polluting wastewater generated from the palm oil milling process. Palm oil mill effluent was used as an electrolyte without any additive or pretreatment to perform electrocoagulation (EC) using electricity (direct current) ranging from 2 to 4 volts in the presence of aluminum electrodes with a reactor volume of 20 L. The production of hydrogen gas, removal of chemical oxygen demand (COD), and turbidity as a result of electrocoagulation of POME were determined. The results show that EC can reduce the COD and turbidity of POME by 57 and 62%, respectively, in addition to the 42% hydrogen production. Hydrogen production was also helpful to remove the lighter suspended solids toward the surface. The production of Al(OH)XHO at the aluminum electrode (anode) was responsible for the flocculation-coagulation process of suspended solids followed by sedimentation under gravity. The production of hydrogen gas from POME during EC was also compared with hydrogen gas production by electrolysis of tap water at pH 4 and tap water without pH adjustment under the same conditions. The main advantage of this study is to produce hydrogen gas while treating POME with EC to reduce COD and turbidity effectively.     

Modeling sediment and nitrogen export from a rural watershed in eastern Canada using the soil and water assessment tool

Watershed simulation models can be used to assess agricultural nonpoint-source pollution and for environmental planning and improvement projects. However, before application of any process-based watershed model, the model performance and reliability must be tested with measured data. The Soil and Water Assessment Tool version 2005 (SWAT2005) was used to model sediment and nitrogen loads from the Thomas Brook Watershed, which drains a 7.84 km rural landscape in the Annapolis Valley of Nova Scotia, Canada. The Thomas Brook SWAT model was comprised of 28 subbasins and 265 hydrologic response units, most of them containing agricultural land use, which is the main nonpoint nitrogen source in the watershed. Crop rotation schedules were incorporated into the model using field data collected within Agriculture and Agri-Food Canada's Watershed Evaluation of Beneficial Management Practices program. Model calibration (2004-2006) and validation (2007-2008) were performed on a monthly basis using continuous stream flow, sediment, and nitrogen export measurements. Model performance was evaluated using the coefficient of determination, Nash-Sutcliff efficiency (NSE), and percent bias (PBIAS) statistics. Study results show that the model performance was satisfactory (NSE > 0.4; > 0.5) for stream flow, sediment, nitrate-nitrogen, and total nitrogen simulations. Annual corn, barley, and wheat yields were also simulated well, with PBIAS values ranging from 0.3 to 7.2%. This evaluation of SWAT demonstrated that the model has the potential to be used as a decision support tool for agricultural watershed management in Nova Scotia.     

Screening and detection of biomarkers in chickpea plants exposed to chromium and cadmium

A broad screening protocol, covering the most general phytochemical groups of compounds, was developed on the basis of high performance thin layer chromatography (HPTLC). A total of six TLC systems, comprising three derivatization reagents, two stationary phases and two mobile phases, were included. The screening method was applied for the identification of biomarkers in the chickpea plant exposed to cadmium and chromium. The biomarkers were selected on the basis of significant changes (0.26-4.6 fold) in concentration levels of phytochemicals. Totally, five different amino acids, three organic acids, one sulphur containing compound and one sugar were identified as biomarkers in chickpea exposed heavy metal.     

Heavy metal contamination from mining sites in South Morocco: Monitoring metal content and toxicity of soil runoff and groundwater

The aim of the present work is the assessment of metal toxicity in runoff, in their contaminated soils and in the groundwater sampled from two mining areas in the region of Marrakech using a microbial bioassay MetPLATE™. This bioassay is based on the specific inhibition of the β-galactosidase enzyme of a mutant strain of Escherichia coli, by the metallic pollutants. The stream waters from all sampling stations in the two mines were all very toxic and displayed percent enzyme inhibition exceeding 87% except SWA₄ and SWB₁ stations in mine C. Their high concentrations of copper (Cu) and zinc (Zn) confirm the acute toxicity shown by MetPLATE. The pH of stream waters from mine B and C varied between 2.1 and 6.2 and was probably responsible for metal mobilization, suggesting a problem of acid mine drainage in these mining areas. The bioassay MetPLATE™ was also applied to mine tailings and to soils contaminated by the acidic waters. The results show that the high toxicity of these soils and tailings was mainly due to the relatively concentration of soluble Zn and Cu. The use of MetPLATE™ in groundwater toxicity testing shows that, most of the samples exhibited low metal toxicity (2.7–45.5% inhibition) except GW3 of the mine B (95.3% inhibition during the wet season and 82.9% inhibition during the dry season). This high toxicity is attributed to the higher than usual concentrations of Cu (189 μg Cu l⁻¹) and Zn (1505 μg Zn l⁻¹). These results show the potential risk of the contamination of different ecosystems situated to the vicinity of these two metalliferous sites. The general trend observed was an increase in metal toxicity measured by the MetPLATE with increasing total and mobile metal concentrations in the studied matrices. Therefore, the MetPLATE bioassay is a reliable and fast bioassay to estimate the metals toxicity in the aquatic and solids samples.     

Clove bud oil: an efficient, economical and widely available oil for the inhibition of wheat seed germination

Pre-harvest sprouting refers to the precocious germination of the grain in the spike prior to harvest as a result of moist weather conditions at harvest time. From the agricultural viewpoint, it is necessary to impose an exogenous dormancy to wheat seeds in order to improve the resistance of seed to pre-harvest sprouting. In this regard, we found that clove bud essential oil is a strong inhibitor for wheat seed germination. The extract obtained from clove bud by supercritical fluid extraction using CO₂ as solvent minimized the number of extracts to two compounds, eugenol and eugenyl acetate. Eugenol, as the main constituent of the oil, was responsible for its strong inhibitory activity in wheat seeds. The aqueous solution of clove bud oil was submitted to germination assay at various concentrations from 50 to 400 mg/L. Complete inhibition of seed germination was recorded when the concentration was 400 mg/L. Roots and sprouts have similar sensitivity to inhibitory effect. In an empirical study, the synergistic cooperation of eugenol and eugenyl acetate from clove bud oil in the inhibition of seed germination was found to be a 1:1 ratio. The clove bud essential oil is widely available and will broaden the horizon of applications for natural and safe inhibitors in the fields.