Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Hepatitis B virus infection among health care workers in Public Teaching Hospitals in Khartoum State, Sudan

Background

Hepatitis B virus (HBV) infection is a global public health problem. It is estimated that there are more than 300 million HBV carriers in the world.

Aim

The study aimed to examine the sero-prevalence of hepatitis B virus (HBV) markers among health care workers (HCWs) in Public Teaching Hospitals in Khartoum State, in the year 2004.

Methods

The study is an observational, cross sectional, facility-based study. It was conducted on stratified two-stage cluster random sample of 843 subjects. The study followed non-parametric statistical methods, using Z-test for single proportion.

Results

Among the 843 subjects tested for all HBV markers (Anti-HBc, HBsAg, HBsAb, and HBeAg), the prevalence of Anti-HBc, HBsAg, HBsAb, and HBeAg was found to be 57% (CI 95%:53-60%), 6% (CI 95%:4.0-8.0%), 37% (CI 95%:34-40%) and 9% (CI 95%:7-11%) respectively. P < 0.05.

Conclusion

Seroprevalence of all HBV markers (P < 0.05) was found to be significantly high, while the rate of immunity against HBV infection was low among health care workers In Public Teaching Hospitals in Khartoum State, Sudan.     

Introducing roadside hazard severity indicator based on evidential reasoning approach

Safety experts have, in recent years, been attentive to roadside accident severity and occurrence. Hitherto, to prioritize road segment hazardousness, there have been little efforts to quantify a well defined indicator. In this regard, the existing indicators are usually very plain and the overall configuration of roadside is rated by experts with an exact number describing its condition. Hence, the uncertainties which come with the subjective judgments cannot be regarded as of any substance. This research contribution therefore presents a procedure to assess the road safety (roadside safety indicator) by means of the evidential reasoning (ER) approach. The betterment of ER as opposed to the available procedures for roadside safety assessment is that the proposed approach makes allowance for the uncertainties which may arise from individual judgments. Additionally, when there is a dearth of evidence concerning factors which affect roadside hazardousness severity to collate several roadside segments, this procedure will offer the benefits of utilizing the maximum/minimum utility function. With the aid of the drawn indicator, organizations and agencies responsible for ensuring road safety can reach more flexible decisions to set in-place uncertain planning and road segments priorities. This indicator can also be utilized as a variable to include roadside conditions in crash severity prediction models. A field case study has also been carried out in an attempt to follow and validate the proposed approach which is based on the run-off accident history for a sample road segments. The crash data confirm the suggested indicator.     

Big data and predictive analytics to optimise social and environmental performance of Islamic banks

Environment Systems and Decisions - Regardless of known as environment-friendly entities, Islamic banks indirectly impact the environment through their clients’ engagement and slow response...     

Evaluation of CMIP5 models and ensemble climate projections using a Bayesian approach: a case study of the Upper Indus Basin,Pakistan

Environmental and Ecological Statistics - The availability of a variety of Global Climate Models (GCMs) has increased the importance of the selection of suitable GCMs for impact assessment studies....     

Effects of microbial inoculations and surfactant levels on biologically- and chemically-assisted phytoremediation of lead-contaminated soil by maize (Zea Mays L.)

Assisted phytoremediation has been widely used for decontamination of potentially toxic elements contaminated soils. A greenhouse experiment was conducted to evaluate the effectiveness of different microbial inoculations and surfactant levels on the phytoremediation of a Pb-polluted calcareous soil by maize. The results showed that application of surfactant increased both root and shoot dry matter yields. Microbial inoculations, however, had no significant effect on the root or shoot dry matter yield. Mean Pb uptake in maize root or shoot increased only following the application of some surfactant levels. Inoculation with microorganisms significantly increased both mean Pb concentration and uptake in maize root but not in maize shoot. Application of 4?mmol surfactant kg?1 along with inoculation with Priformospora indica was effective in increasing Pb phytostabilisation potential. While the application of 2?mmol surfactant kg^?1 along with inoculation with Pseudomonas fluorescens was effective in increasing Pb phytoextraction potential. The fact that the values of translocation efficiencies were low in all treatments, demonstrated the low capability of maize for translocation of Pb from root to shoot. Inoculation with P. fluorescens was the most effective treatment in increasing metal micronutrient uptake. Microbial inoculation and surfactant levels enhanced Pb phytoremediation mostly through phytostabilisation of this metal by maize.     

What are heavy metals? Long-standing controversy over the scientific use of the term ‘heavy metals’ – proposal of a comprehensive definition

The term ‘heavy metals’ is commonly used in the environmental literature to refer to metals and metalloids associated with environmental pollution, toxicity and adverse effects on biota. The term has been diversely defined, mostly in terms of density, relative atomic mass and atomic number. This diversity of definitions has raised questions about the nomenclature of these elements. The inclusion of the metalloid As and the nonmetal Se with heavy metals is also an important issue. Some people have called the term as meaningless, imprecise and poorly defined and have suggested abandoning the use of the term. The term itself may not be problematic but the careless and inconsistent use of terminology has led to a confusion about the meaning of the term. The use of the term may be continued but it should be defined in a more comprehensive and scientific way. Here, a more comprehensive definition of the term ‘heavy metals’ is suggested as ‘naturally occurring metals having atomic number (Z) greater than 20 and an elemental density greater than 5 g cm^?3.’ A screening of the Periodic Table according to this definition yields 51 elements to be called ‘heavy metals.’ As and Se are excluded from heavy metals.     

SWOT analysis for socio-ecological landscape variation as a precursor to the management of the mountainous Kanshi watershed,Salt Range of Pakistan

Variations in geo-environmental attributes differ strongly from those of urban anthropogenic structures. Similarly, these types of structures are self-directed and arranged and prone to abrupt process-related changes and modifications. Thus, there are many reasons why planned urbanization forms in association with disturbances in ecosystem mobility. The current research highlights these variations in the context of social–cultural assessments within the Jhelum River watershed, which strongly expresses urbanization structure development mechanisms. The climate ranges from semi-arid to subhumid subtropical and sub-mountainous climate, though the extreme temperatures may rise as high as 49.4°C in June and may drop as low as ?1.6°C in January. The rainfall is low in the southwest and gradually increases towards the northeast, whereas the Salt Range is the major topographic feature that controls climatic impacts and promotes sustainable development. Cross-disciplinary methods are adopted in this investigation to assess the social–ecological landscape system (SELS) in terms of its mobility and degree of urbanization. The Sustainable Development Goals of the 2030 Agenda recognize that human livelihoods and the management of natural resources cannot be addressed separately. Investing in the sustainability of mountain communities and ecosystem conservation and protection will provide benefits for humanity as a whole. It pertains to the commensurate development of the SELS and its response to interruptions. Thus, a reliable SWOT analysis for management approaches is introduced that may enable the development of competencies that promote and lead towards rapid improvements in the sustainability of retrograde urban infrastructure, including watersheds.     

New beach in a shallow estuarine lagoon: a model-based <Emphasis Type="Italic">E. coli</Emphasis> pollution risk assessment

A 3D hydrodynamic model has been applied to the Curonian Lagoon to study the pollution impact of E. coli on a new beach that might be opened in the lagoon. Through a field survey the E. coli inputs were measured and then used in the numerical model, and through laboratory experiments the decay rate of E. coli was established. The model has been calibrated and validated for the year 2015, and several scenarios have been studied, such as sewage system breakdown, severe weather conditions or high river loads. The model has then been run for a period of 12 years to obtain a robust statistics for the pollution on the planned beach. Results show that the decay rate of E. coli is between 0.55 days and 2.3 days and the modeled decay times are compatible with these numbers. The only scenario that would create a risk for the bathing waters of the beach is a breakdown of the sewage system on the Curonian Spit. In this case the hours (and days) over legally allowable bathing threshold were computed in order to estimate the number of days the beach could be closed. These results have been confirmed by the 12 year simulations. With an influence map analysis the two most critical sewage systems could be identified.     

Characterizations of the Photocatalytically-Oxidized Cross-Linked Chitosan-Glutaraldehyde and its Application as a Sub-Layer in the TiO2/CS-GLA Bilayer Photocatalyst System

Photocatalytically-oxidized cross-linked chitosan-glutaraldehyde (CS-GLA) was obtained via irradiation of a simple assemblage of an immobilized layer-by-layer TiO₂/CS-GLA system on a glass plate with a 45-W fluorescent lamp. The oxidation process was observed to occur only in the presence of oxygen and TiO₂ within 5 cycles (10 h) of irradiation. Characterizations studies of the oxidized cross-linked polymer involving swelling index, pH-potentiometric titration and ionic conductivity measurements, as well as CHN, FTIR, ¹³C solid-state NMR,UV–Vis DRS and photoluminescence spectroscopy analyses generally indicated that the oxidation led to the formation of carbonyl groups, partial elimination of some un-reacted amino groups and change of visual color to be more brown without altering much of the whole molecular structure of the CS-GLA. This study also indicated that the photocatalytic performance of TiO₂/oxidized CS-GLA system was higher than both TiO₂/CS-GLA system and TiO₂ single layer for the removal of phenol. Moreover, the adsorption effect was extremely negligible and the photodegradation of phenol was mainly due to the photocatalytic process.