Organismic-level acute toxicology profiling of reactive azo dyes

In the present study, organismic-level acute toxicology profile of three reactive azo dyes, viz. Reactive Blue 221, Reactive Red 195, and Reactive Yellow 145, was investigated, by using bacterial (Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Listeria monocytogenes, and Bacillus subtilis), fungal (Trichoderma asperellum, Aspergillus flavus, Fusarium fujikuroi, and Rhizoctonia solani), plant (Raphanus sativus, Triticum aestivum, Sorghum bicolor, and Phaseolus mungo), and aquatic (Artemia salina and Daphnia magna) specimens. Microbial test organisms (all the six bacteria and two fungi, i.e., T. asperellum and A. flavus) and D. magna were found to be relatively more sensitive towards the reactive azo dyes and their mixture, as the EC50 values were in the range of 80–330, 135–360, and 108–242 ppm for bacteria, fungi, and D. magna, respectively (but the effect was not acutely toxic). Moreover, the effect of dye mixture was comparable tothe individual dyes in almost all the tested microbial specimens. For plant seeds, the dye mixture was found to be relatively more inhibitory towards T. aestivum and R. sativus than the individual dyes. For S. bicolor and P. mungo seeds, the effect of the dye mixture was almost identical to the individual dyes. However, in all cases, EC50 values were in the range of 950–3500 ppm, which indicates a non-toxic effect on plant seed germination potential. Likewise, the dyes and their mixture were not acutely toxic for Artemia salina larvae (more sensitive to the dye mixture) and Daphnia magna neonates (EC50, 516–950 and 108–242 ppm, respectively).     

Evaluation of Water Quality Management Alternatives to Control Dissolved Oxygen and Un-ionized Ammonia for Ravi River in Pakistan

Different water quality management alternatives, including conventional wastewater treatment, transportation of wastewater, flow augmentation, low-cost treatment with reuse, and wetlands, are evaluated by using a verified dissolved oxygen (DO) model for the Ravi River. Biokinetic rate coefficients of the Ravi River for both the carbonaceous and nitrogenous oxygen-demanding wastes are adjusted, keeping in view the type and level of wastewater treatment. The conventional activated sludge process with nitrification comes out to be the most expansive alternative to meet the DO standard of 4 mg/L. Additional treatment cost is required to maintain un-ionized ammonia levels <0.02 mg/L, which corresponds to achieving treatment levels of 5 mg/L of DO in the river. Under critical low-flow conditions (i.e., minimum average seven consecutive days) of 9.2 m³/s, a flow augmentation of 10 m³/s can reduce 30 % of the cost with conventional wastewater treatment. Transportation of wastewater from the city of Lahore is a cost-effective alternative with 2.5 times less cost than the conventional process. Waste stabilization ponds (WSP) technology is a low-cost solution with 3.5 times less cost as compared to the conventional process. Further reduction in pollution loads to the Ravi River can be achieved by reusing WSP effluents for irrigation in the near proximity of Lahore along the Ravi River. The study results show that, for highly polluted rivers with such extreme flow variations as in case of the Ravi River, meeting un-ionized ammonia standards can reduce the efforts required to develop carbonaceous biochemical oxygen demand-based waste load allocations.     

Application of nanoclay for preconcentration of ultra trace amounts of palladium in environmental samples prior to its determination by ETAAS

In the present work, a batch preconcentration technique using nanoclay with 5-(4-dimethylaminobenzylidene)rhodanine coupled with electrothermal atomic absorption spectrometry was developed for the separation and determination of trace amounts of palladium. In this method, the sample solution was stirred with nanoclay as an adsorbent. Then, adsorbed palladium was subsequently eluted with HCl in acetone (1.5 mol L^?1) and, finally, this eluate was injected to electrothermal atomic absorption spectrometry. Under the optimum conditions, the limit of detection and linear dynamic range were found to be 2.6 and 10.0–133 ng L^?1 (in original solution), respectively. Furthermore, the enrichment factor and relative standard deviation of seven replicate determinations were 148 and ±5.1 %, respectively. This suggested method is simple, selective and sensitive and can be applied to the extraction and determination of palladium in water, tea leaves, synthetic sample and certified reference material with satisfactory results.     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.     

Prediction of AMD generation potential in mining waste piles, in the sarcheshmeh porphyry copper deposit, Iran

This study investigates the possibility of acid mine drainage (AMD) generation in active and derelict mine waste piles in Sarcheshmeh Copper Mine produced in several decades, using static tests including acid–base accounting (ABA) and net acid-generating pH (NAGpH). In this study, 51 composite samples were taken from 11 waste heaps, and static ABA and NAGpH tests were carried out on samples. While some piles are acid producing at present and AMD is discharging from the piles, most of them do not show any indication on their AMD potential, and they were investigated to define their acid-producing potential. The analysis of data indicates that eight waste piles are potentially acid generating with net neutralization potentials (NNPs) of ?56.18 to ?199.3, net acid generating of 2.19–3.31, and NPRs from 0.18 to 0.44. Other waste piles exhibited either a very low sulfur, high carbonate content or excess carbonate over sulfur; hence, they are not capable of acid production or they can be considered as weak acid producers. Consistency between results of ABA and NAGpH tests using a variety of classification criteria validates these tests as powerful means for preliminary evaluation of AMD/ARD possibilities in any mining district. It is also concluded that some of the piles with very negative NNPs are capable to produce AMD naturally, and they can be used in heap leaching process for economic recovery of trace amounts of metals without applying any biostimulation methods.     

Drainage discharge impacts on hydrology and water quality of receiving streams in the wheatbelt of Western Australia

The use of surface and subsurface drainage to manage waterlogging and salinity in dryland (rainfed) and irrigated agricultural systems is common throughout the world. The drainage systems often discharge into natural streams. The same is true for the wheatbelt drainage systems in south-western Australia, where 11,000 km (ABS 2003) of artificial drains have been constructed within the last two decades. Prior to this study, the likely impacts of this discharge on the streambed chemistry and water quality of receiving streams were largely unknown. The study evaluated these impacts in creeks receiving the drainage discharge from engineering options in four river systems in south-western Australia. This study clearly showed elevated levels of metals ions, EC and pH in the stream water at treated sites relative to their levels at untreated sites. At most sites, impacts of drainage discharge were observed on the streambed electrical conductivity (EC) and pH (both in 1:5 extract) in the receiving streams; however, there was little evidence of impact on metal ion content in the streambed soil. The study found no clear differences in the dynamics of the watertable adjacent to streams whether they received drainage discharge or not, irrespective of the size of the artificial drainage systems.     

Trace metal contents in chewing gums and candies marketed in Turkey

Cu, Ni, Pb, Fe, Mn, Cr and Cd contents were determined in 17 different brands of chewing gum and candy samples available in local markets of Kayseri, Turkey. Concentration of selected trace metals were estimated using flame atomic absorption spectrometer after dry and wet digestion methods. Out of 17 brands of chewing gums and candies analysed, four were cocoa based, two were sugar based and other were of fruit based. Copper level ranged from 0.219 to 2.455 microg/g with an average of 1.390 microg/g. Nickel ranged from 0.120 to 2.588 microg/g with an average of 0.846 microg/g. Lead level ranged from 0.031 to 2.46 microg/g with an average of 0.746 microg/g. Iron level ranged from 3.963 to 9.863 microg/g with an average of 6.618 microg/g. Manganese level ranged from 1.872 to 5.067 microg/g with an average of 3.196 microg/g. Chromium ranged from 0.740 to 6.265 microg/g with an average of 2.473 microg/g and cadmium level ranged from 0.027 to 0.825 microg/g with an average of 0.296 microg/g. Cocoa based samples were found to have higher contents of the analysed metals than sugar and fruit based samples.     

Simultaneous derivatization and extraction of nitrophenols in soil and rain samples using modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry

A simple and sensitive method based on a modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry has been successfully developed for the extraction and simultaneous derivatization of some nitrophenols (NPs) in soil and rain samples. Microwave-assisted solvent extraction was used for the extraction of NPs from the soil, while the rain sample was directly applied to the previously mentioned method. Briefly, in this method, the analytes were extracted from aqueous samples into a thin layer of organic solvent (dodecane?+?10 % tri-n-octylphosphine oxide) sustained in the pores of a porous hollow fiber. Then, they were back-extracted using a small volume of organic acceptor solution (25 μl; 10 mg/L N-methyl-N-(trimethylsilyl)trifluoroacetamide, as derivatization reagent, in acetonitrile) that was located inside the lumen of the hollow fiber. Under the optimized extraction conditions, enrichment factors of 255 to 280 and limits of detection of 0.1 to 0.2 μg/L (S/N?=?3) with dynamic linear ranges of 1–100 μg/L were obtained for the analytes. The accuracy of the approach was tested by the relative recovery experiments on spiked samples, with results ranging from 93 to 113 %. The method was shown to be rapid, cost-effective, and potentially interesting for screening purposes.