Emission factors from residential combustion appliances burning Portuguese biomass fuels

Smoke from residential wood burning has been identified as a major contributor to air pollution, motivating detailed emission measurements under controlled conditions. A series of experiments were performed to compare the emission levels from two types of wood-stoves to those of fireplaces. Eight types of biomass were burned in the laboratory: wood from seven species of trees grown in the Portuguese forest (Pinus pinaster, Eucalyptus globulus, Quercus suber, Acacia longifolia, Quercus faginea, Olea europaea and Quercus ilex rotundifolia) and briquettes produced from forest biomass waste. Average emission factors were in the ranges 27.5-99.2 g CO kg(-1), 552-1660 g CO(2) kg(-1), 0.66-1.34 g NO kg(-1), and 0.82-4.94 g hydrocarbons kg(-1) of biomass burned (dry basis). Average particle emission factors varied between 1.12 and 20.06 g kg(-1) biomass burned (dry basis), with higher burn rates producing significantly less particle mass per kg wood burned than the low burn rates. Particle mass emission factors from wood-stoves were lower than those from the fireplace. The average emission factors for organic and elemental carbon were in the intervals 0.24-10.1 and 0.18-0.68 g kg(-1) biomass burned (dry basis), respectively. The elemental carbon content of particles emitted from the energy-efficient "chimney type" logwood stove was substantially higher than in the conventional cast iron stove and fireplace, whereas the opposite was observed for the organic carbon fraction. Pinus pinaster, the only softwood species among all, was the biofuel with the lowest emissions of particles, CO, NO and hydrocarbons.     

Single-stroke mechanical joining of sheet panels to tubular profiles

This paper proposes an innovative mechanical joining process for fixing sheet panels against tubular profiles with a single ram stroke.The presentation includes independent determination of the mechanical properties of sheets and tubes, finite element modelling and experimentation under laboratory conditions. The aim is to identify the key parameters of the process, to diagnose possible sources of failure and to understand the routes for selecting the most appropriate joining conditions.Results and observations show that fixing sheet panels to tubular profiles by tube forming with a single ram stroke is a flexible and cost-effective mechanical joining process that can be easily industrialized in a small capacity press. Applications may span for a wide range of engineering applications where conventional technologies based on fasteners, glueing with structural adhesives, brazing and soldering or welding cannot be employed due to technical, aesthetical or economic constraints.     

Habitat differences affect the nuclear morphology of the erythrocytes and the hepatic melanin in Leptodactylus fuscus (Anura) in the Brazilian Cerrado savanna

Environmental Science and Pollution Research - The sensitivity of anuran to the effects of habitat destruction and contamination has led to a preoccupying global decline in their populations....     

Microscale Toxicity Identification Evaluation (TIE) for interstitial water of estuarine sediments affected by multiple sources of pollution

Estuaries in the world are affected by different contamination sources related to urbanisation and port/industrial activities. Identifying the substances responsible for the environmental toxicity in estuaries is challenging due to the multitude of stressors, both natural and anthropogenic. The Toxicity Identification and Evaluation (TIE) is a suitable way of determining causes of toxicity of sediments, but it poses difficulties since its application is labour intensive and time consuming. The aim of this study is to evaluate the diagnosis provided by a TIE based on microscale embryotoxicity tests with interstitial water (IW) to identify toxicants in estuarine sediments affected by multiple stressors. TIE showed toxicity due to different combinations of metals, apolar organic compounds, ammonia and sulphides, depending on the contamination source closest to the sampling station. The microscale TIE was able to discern different toxicants on sites subject to different contamination sources. There is good agreement between the results indicated in the TIE and the chemical analyses in whole sediment, although there are some disagreements, either due to the sensitivity of the test used, or due to the particularities of the use of interstitial water to assess the sediment toxicity. The improvement of TIE methods focused on identifying toxicants in multiple-stressed estuarine areas are crucial to discern contamination sources and subsidise management strategies.

     

Particulate matter–bound organic compounds: levels,mutagenicity, and health risks

Environmental Science and Pollution Research - Increased industrialization and consumption of fossil fuels in the Metropolitan Region of São Paulo (MRSP), Brazil, have caused a growth of the...     

Copaiba oil and vegetal tannin as functionalizing agents for açai nanofibril films: valorization of forest wastes from Amazonia

The applicability of cellulose nanofibrils (CNFs) has received attention due to their attractive properties. This study proposes the functionalization of açai CNFs with copaiba oil and vegetal tannins to produce films with potential for packaging. Bio-based films were evaluated by vapor permeability, colorimetry, and mechanical strength. CNFs were produced by mechanical fibrillation, from suspensions of bleached açai fibers and commercial eucalipytus pulp. Moreover, copaiba oil and vegetal tannin were added to the CNFs to produce films/nanopapers by casting from both suspensions with concentrations of 1% (based on CNF dry mass). The bulk densities of the eucalyptus CNF films were higher (1.126–1.171 g cm^?3) compared to the açai CNF ones. Films from eucalyptus and açai pulps containing copaiba oil and tannins presented higher Tonset and Tmax, respectively (312 and 370 °C). Films with açaí CNFs functionalized with copaiba oil and tannin showed the lowest permeability value (370 g day^?1 m^?2). Films produced with eucalyptus pulp, and eucalyptus pulp functionalized with copaiba oil highlighted by superior mechanical strength, achieving 133.8 and 121.4 MPa, respectively. The evaluation of colorimetry showed a greater tendency to yellowing for açai films, especially those functionalized with vegetal tannins. Besides the low cost, functionalized vegetal-based nanomaterials could have attractive properties, with potential for application as some kind of packaging, for transporting basic products, such as breads, flours, or products with low moisture content, enabling efficient utilization of forest wastes.

     

Factors driving sediment compositional change in the distal area of the Ria de Vigo (NW Spain): oceanographic processes vs. paleopollution

Environmental Science and Pollution Research - We analyze potential Late Holocene metal contamination along a sediment core collected in the distal zone of Ria de Vigo (North Spain). Statistical...     

Dynamics of medicinal plants knowledge and commerce in an urban ecosystem (Pernambuco, Northeast Brazil)

Given the importance of markets and fairs for the commerce of medicinal plants, an ethnobotanical study was undertaken at the Caruaru Fair (Pernambuco, northeastern Brazil) to compare the richness of species sold and their values of relative importance (RI) using two datasets collected with a 4-year interval. The seasonality of these plants?? supplies was also analyzed. The Caruaru Fair is located in the 18 de Maio Park. It covers an area 40,000?m² and is used by merchants who sell several types of products, such as supplies, handicrafts, clay and aluminum utensils, shoes, clothes and medicinal plants. Semistructured interviews were carried out with the vendors who agreed to take part in the study in order to record which plants were sold and their respective indications. The plants were collected, and the species were determined. The information was analyzed with quantitative tools. A total of 169 plants were identified from both surveys, which were significantly different with regard to species richness (p?<?0.05) but did not vary in relation to species?? Relative Importance (p?>?0.05). In relation to the seasonality of the plant supply, habit may explain the lack of some species during certain periods of the year, as most of the absent plants are herbaceous. In terms of the species most sold locally, it was found that spontaneous tree species are well known and extensively commercialized.