Gaseous ethylbenzene removal by photocatalytic TiO2 nanoparticles immobilized on glass fiber tissue under real conditions: evaluation of reactive oxygen species contribution to the photocatalytic process

Environmental Science and Pollution Research - Photocatalytic oxidation (PCO) using a TiO2 catalyst is an effective technique to remove gaseous volatile organic compounds (VOCs). Herein, a...     

Extrication of biodiesel feedstock from early stage of food waste liquefaction

Biodiesel is commonly produced from vegetable oils, mostly edible and more expensive than petroleum diesel. By considering the cost of the conversion processes, cheap feedstock such as triglycerides and fatty acids (FA) extracted from early stage of food waste liquefaction has become a better choice than vegetable oils, as it could provide high yield of biodiesel without any compromise to food supply and other resources. In this study, FA from early stage of food waste liquefaction was extracted and tested for use as feedstock for biodiesel synthesis. The raw material was not pretreated but extraction was done by dry and wet methods. It was found that wet method could minimized the lost of short and medium-chained FA as well as reducing the number of steps required, thus, yielding higher amount of FA as feedstock. The effects of mixing, methanol ratio, reaction time and catalyst content were investigated for the acid-catalyzed esterification. The maximum biodiesel conversion obtained was 97.4 %.     

A new method for environmental site assessment of urban solid waste landfills

Regarding various types of pollutant, waste management requires high attention. Environmental site selection study, prior to landfill operation, and subsequently, monitoring and maintaining of the location, are of foremost points in landfill site selection process. By means of these studies, it is possible to control the undesirable impacts caused by landfills. Study ahead aims at examination of effectiveness of a new method called Monavari 95–2 in landfill site assessment. For this purpose, two landfills Rasht and Andisheh, which are, respectively, located on humid and arid areas, were selected as case studies. Then, the results obtained from both sites were compared with each other to find out the weaknesses and strengths of each site. Compared with others similar methods, much more criteria (53 parameters) can be considered within this method, so the results will be more calculable. According to this method, Rasht landfill (site H) is classified as unacceptable landfill site i.e. there is an urgent need for a new suitable site for landfill, while Andishe Landfill (site D) is ranked as acceptable landfill site but needs environmental management program to handle the existing weaknesses.     

Potentially toxic elements in soil of the Khyber Pakhtunkhwa province and Tribal areas,Pakistan: evaluation for human and ecological risk assessment

Environmental Geochemistry and Health - Potentially toxic elements (PTEs) contaminations in the soil ecosystem are considered as extremely hazardous due to toxicity, persistence and bioaccumulative...     

Evaluating the last remnants of Butea monosperma (Lam.) Kuntze Forest for their in situ conservation: a case study

This paper summarizes the findings obtained in a monitoring study to understand the sources and processes affecting the quality of shallow and deep groundwater near central air conditioning plant site in Trombay region by making use of physicochemical and biological analyses. All the measured parameters of the groundwaters indicate that the groundwater quality is good and within permissible limits set by (Indian Bureau of Standards 1990). Shallow groundwater is dominantly of Na–HCO₃ type whereas deep groundwater is of Ca–Mg–HCO₃ type. The groundwater chemistry is mainly influenced by dissolution of minerals and base exchange processes. High total dissolved solids in shallow groundwater compared to deeper ones indicate faster circulation of groundwater in deep zone preferably through fissures and fractures whereas groundwater flow is sluggish in shallow zone. The characteristic ionic ratio values and absence of bromide point to the fact that seawater has no influence on groundwater system.     

Effect of vehicle exhaust on the quantity of polycyclic aromatic hydrocarbons (PAHs) in soil

PAHs are formed during the incomplete combustion of organic substances containing carbon and hydrogen and are one of the first atmospheric pollutants identified as carcinogens. Most of the PAH environmental burden is found in the soil (95%). Soil samples collected from different roadsides were analyzed for seven polycyclic aromatic hydrocarbons (PAHs). The quantitative and qualitative analysis was carried out by UV Spectrophotometer. The individual PAH value ranged from 0.1 to 18.0 mg/kg. Phenenthrene and Pyrene were found to be the most abundant compounds. Vehicle emissions are the principal source of PAH in the Roadside soils. The highest concentration was found at site S2 (Hasthtnagri Roadside) which shows the highest traffic density.     

Radon level and radon effective dose rate determination using SSNTDs In Sannur cave, Eastern desert of Egypt

The European eel’s swimbladder nematode, Anguillicola crassus, sampled from the Asi River (Orontes River) in Antakya (Hatay, Turkey) in May 2006 were analysed by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for their some heavy metal (Cd, Cr, Cu, Fe, Hg, Mn, Pb and Zn) levels. The metal concentrations of the parasites were compared to different organs (swimbladder, liver, muscle and skin) of the fish hosts. The parasite contained statistically highly significantly amounts of Fe (P < 0.05). The iron level of nematode was up to 25.52 times than the muscle of its host, Anguilla anguilla. However, bioconcentration of Cd, Cr, Cu, Hg, Mn, Pb, Zn were detected in the A. crassus and it contained no statistically differences with the other tissues of its host, the eel (P > 0.05). Furthermore, no significant differences were detected in the heavy metal accumulations between the parasitized and un-parasitized fish tissues. The analysed metals (Cd, Cr, Cu, Fe, Mn, Pb and Zn) were found in fish muscle at mean concentrations under the permissible limits proposed by FAO.     

Recent Progress in Silane Coupling Agent with Its Emerging Applications

Journal of Polymers and the Environment - This paper presents the effects of silane coupling agent, which includes interfacial adhesive strength, water treatment, polymer composites and coatings...     

Assessment of tropical suburban surface soils contamination from Jengka,Malaysia

Heavy metals in suburban soils pose both indirect and direct health risks. This study assessed the concentrations of Cr, Zn, Pb, and Cd in Jengka (Malaysia) suburban soil and estimated the human health risk. Health risk assessment (HRA) was utilized to assess non-cancer and cancer risks. The concentrations of heavy metals increased in the following order: Cd < Zn < Cr < Pb. The heavy metals were found to be divided into two components using principal component analysis (PCA), with PC1 comprising Pb and Cd and PC2 containing Zn and Cr. PC1 originates from anthropogenic sources, while PC2 is often from mixed anthropogenic and natural sources. Despite having the lowest mean concentration, Cd was enriched based on the geo-accumulation index (Igeo) and enrichment factor (EF). Average hazard index values were below the acceptable threshold (HI < 1) for dermal and inhalation pathways suggesting a low non-cancer risk. Jengka suburban soil had total lifetime cancer risk values slightly higher than the acceptable threshold (1 × 10⁻⁵). Skin contact was the most prominent contributing exposure pathway for both non-carcinogenic and carcinogenic risks. This study suggests that heavy metal bioactivity levels be used to make a plausible HRA of heavy metal pollution in suburban soils.