Dissipation of DDT in a heavily contaminated soil in Mato Grosso, Brazil

After the prohibition of organochlorine-pesticide use in Brazil for controlling insect vector diseases, Mato Grosso State gathered the exceeding DDT and stored it irregularly in an open air area that belongs to the National Health Foundation, causing soil contamination. This study aimed to evaluate the contamination level and dissipation of p,p'-DDT and p,p'-DDE in this area. For that, surface soil samples were collected on 19 September 2000, 15 December 2000, 4 April 2001 and soil samples 30-40 cm; 60-70 cm and 90-100 cm deep were taken from five points in the studied area on 17 July 2001. The contaminants were determined by a small scale method which consists on extraction and clean-up steps combined into one step by transferring soil samples mixed with neutral alumina to a chromatographic column prepacked with neutral alumina and elution with hexane:dichloromethane (7:3 v:v). The eluate was concentrated and the analytes were quantified by gas chromatography with an electron-capture detector. p,p'-DDT at surface soil ranged from 3,800 to 7,300 mg kg(-1). 30-40 cm deep soil sample concentrations varied from 0.036 to 440 mg kg(-1) while 90-100 cm deep samples varied from 0.069 to 180 mg kg(-1). Volatilization is probably the main dissipation process. The p,p'-DDT is moving slowly downward in the soil profile, however, the levels of this contaminant are high enough to present risk to underground waters.     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Studies on degradation of 14C-DDT in the marine environment.

Degradation of 14C-DDT was studied in a marine ecosystem for 60 days and in marine sediments under moist and flooded conditions using a continuous flow system for a period of 130 days. 14C-DDT residues were recovered in sediments of the marine ecosystem at uniform level of 60-65% of the applied 14C-activity throughout the incubation period. DDD was a major metabolite in sediments while DDMU was a major metabolite in clams. Clams brought about substantial degradation of DDT. However, 14C-residues recovered form clams are not suggestive of significant bioaccumulation. In the continuous flow experiment, under both moist and flooded conditions, DDT underwent degradation and about 22% of the applied 14C-activity was recovered as volatiles under both conditions. In sediments, extractable 14C-residues accounted for about 30 and 19% under moist and flooded conditions, respectively. DDT was the major compound in extractable residues as identified by TLC-autoradiographic procedures. More bound residues were formed under flooded than under moist conditions.     

Photobiology of corals from Brazil’s near-shore marginal reefs of Abrolhos

Coral communities were examined from highly turbid near-shore marginal reefs of Abrolhos (Brazil) to test a paradigm previously developed from observations in clear water reefs; specifically, that coral photobiological properties follow a highly conserved linear relationship with optical depth (ζ) via preferential ‘non-photochemical’ over ‘photochemical’ dissipation of absorbed light energy. PAM flourometry in situ was used to examine the photobiology of the most dominant coral species throughout the platform surfaces and bases of Abrolhos’ characteristic ‘chapeir?es’ reef framework; however, none of the species consistently adhered to the ‘clear water paradigm’. PAM measurements further demonstrated that species conformed to two different strategies of non-photochemical energy dissipation: transient but relatively rapid for the two closely related endemic species (Mussismilia braziliensis and Mussismilia harttii) as opposed to more persistent for Montastrea cavernosa, Porites astreoides and Siderastrea stellata. Further experiments demonstrated that tolerance to anomalous stress amongst species did not correspond with the non-photochemical energy dissipation strategy present but was consistent with the relative dominance of species within the chapeir?es coral communities.     

Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.     

Economies of size and density in municipal solid waste recycling in Portugal

The recycling of municipal solid waste has a remarkable importance in the preservation of the environment and the welfare of the society. However, it is also important that this service can be provided with efficient costs. This paper aims to search for economies of output density and economies of size in the selective collection and recycling activities in Portugal and to identify the size the utilities should have to become more cost efficient. The sample comprises all Portuguese recycling utilities operating in the wholesale segment in the period 2006–2010. The results show that the Portuguese recycling utilities should increase the quantities of municipal solid waste for recycling (especially glass and paper) and also become larger to dimensions corresponding to a supply of 400–550 thousand inhabitants. With the increasing amount of glass collected, utilities are simultaneously struggling to fulfill the targets established by the European legislation and explore the existing economies of output density. The results also show that the management of these services carried out by private companies and the use of incineration (by utilities) seem to reduce the costs of utilities while the regulation of these services and the composting of waste held by utilities tend to increase costs.     

Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option

Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.