Levels of total suspended particulate matter and major trace elements in Kosovo: a source identification and apportionment study

Concentration levels of total suspended particles (TSP) and 27 major, minor and trace elemental components were determined at four sites in Kosovo through a 1-year survey (January-December 2002). Ambient concentrations were evaluated in comparison to limit values. The origin of elemental TSP constituents was investigated by calculating enrichment factors and diagnostic ratios. Multivariate statistics, such as hierarchical cluster analysis and factor analysis, were also employed to identify emission sources. A multivariate statistical receptor model (Absolute Principal Component Analysis, APCA) was applied to quantify source contributions. Soil dust, cement production, vehicular emissions, brake wear, and fuel combustion were identified as major sources with variable contributions at the four sampling sites.     

An assessment of solutions for combating water shortage in Cyprus: the views of citizens in the Province of Larnaka

This paper investigates the views of citizens of the Province of Larnaka in Cyprus regarding solutions to combat the problem of water shortage in the area in which they live in. The research was carried out in 2008–2009 and used simple random sampling involving 426 individuals. According to the citizens, the most important solutions to the problem of water shortage are, in order of importance, desalination of seawater; less prodigal use of water; reduction of water losses from the transport network; construction of water dams; and reforestation of non-vegetated areas. These were followed by the construction of lake dams on agricultural land; installation of a water recycling system; construction of trenches in surfaces with steep slopes; protection and creation of agricultural evergreen plantations; use of seawater in pools; use of liquid urban waste for irrigation purposes; and construction of water tanks in houses to take advantage of rainwater. Less accepted solutions were deep tillage of arable land along contour lines; construction of terraces; rangeland management; and transporting water in tankers.     

A comparison of the comprehensive municipal solid waste management systems of the region of Prague and the principality of Asturias. the influence of collection systems and municipality size on the waste collection and the recycling rates

Journal of Material Cycles and Waste Management - The correct management of municipal solid waste (MSW) is a critical factor in the protection of the environment, as well as a source for the...     

Antifungal activity of P3HB microparticles containing tebuconazole

In this study, tebuconazole (TEB)-loaded poly-3-hydroxybutyrate (P3HB)-based microparticles were developed and comprehensively characterized. TEB-loaded microparticles with the initial loading amounts of the fungicide of 10, 25, and 50% of the polymer mass (TEB 10, TEB 25, and TEB 50%) were prepared using emulsion technique. Encapsulation efficiency of TEB varied from 59 to 86%. As the loading amount was increased, the average diameter of microparticles increased too, from 41.3 to 71.7?µm, while zeta potential was not influenced by TEB loading, varying between –32.6 and –35.7?mV. TEB was gradually released from the microparticles to the model medium, and after 60?d, from 25 to 43% of TEB was released depending on the content of the encapsulated fungicide. The data obtained from in vitro TEB release were fitted to different mathematical models. It was shown that the release profiles of TEB could be best explained by the Zero-order, Higuchi, and Hixson–Crowell models. The antifungal activity of the P3HB/TEB microparticles against phytopathogenic fungi Fusarium moniliforme and Fusarium solani was demonstrated by in vitro tests conducted in Petri dishes. Thus, hydrophobic agrochemicals (TEB) can be effectively encapsulated into P3HB microparticles to construct slow-release formulations.     

Dependence of home outdoor particulate mass and number concentrations on residential and traffic features in urban areas

The associations between residential outdoor and ambient particle mass, fine particle absorbance, particle number (PN) concentrations, and residential and traffic determinants were investigated in four European urban areas (Helsinki, Athens, Amsterdam, and Birmingham). A total of 152 nonsmoking participants with respiratory diseases, not exposed to occupational pollution, were included in the study, which comprised a 7-day intensive exposure monitoring period of both indoor and home outdoor particle mass and number concentrations. The same pollutants were also continuously measured at ambient fixed sites centrally located to the studied areas (fixed ambient sites). Relationships between concentrations measured directly outside the homes (residential outdoor) and at the fixed ambient sites were pollutant-specific, with substantial variations among the urban areas. Differences were more pronounced for coarse particles due to resuspension of road dust and PN, which is strongly related to traffic emissions. Less significant outdoor-to-fixed variation for particle mass was observed for Amsterdam and Birmingham, predominantly due to regional secondary aerosol. On the contrary, a strong spatial variation was observed for Athens and to a lesser extent for Helsinki. This was attributed to the overwhelming and time-varied inputs from traffic and other local sources. The location of the residence and traffic volume and distance to street and traffic light were important determinants of residential outdoor particle concentrations. On average, particle mass levels in suburban areas were less than 30% of those measured for residences located in the city center. Residences located less than 10 m from a street experienced 133% higher PN concentrations than residences located further away. Overall, the findings of this multi-city study, indicated that (1) spatial variation was larger for PN than for fine particulate matter (PM) mass and varied between the cities, (2) vehicular emissions in the residential street and location in the center of the city were significant predictors of spatial variation, and (3) the impact of traffic and location in the city was much larger for PN than for fine particle mass.     

Aerobic biodegradation of organotin compounds in activated sludge batch reactors

The biodegradation behavior of four organotin (OT) compounds, namely tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT) and triphenyltin (TPhT), was studied in lab-scale activated sludge batch reactors. The activated sludge was spiked with the OT compounds at a level of 100 microg l(-1) as Sn. Determination of the OT compounds by GC-FPD after ethylation in the dissolved and particulate phase revealed that 24 h after the start of the experiments, almost the total of OT compounds has been removed from the dissolved phase and is associated with the suspended solids. Calculation of mass balance in batch reactors showed that OT compounds biodegradation was performed via a sequential dealkylation process. Removals due to biodegradation were differentiated according to the parent compound. In experiments with non-acclimatized biomass, a percentage of 27.1, 8.3, 73.8 and 51.3 was still present as TBT, DBT, MBT and TPhT, respectively, at the end of the experiment (18th day). Half-lives (t1/2) of 10.2 and 5.1 days were calculated for TBT and DBT, respectively, whereas apparent t1/2 values could not be determined for MBT and TPhT (t1/2>18 days). The capacity of activated sludge to biodegrade OT compounds in the absence of supplemental substrate indicated that these compounds can be metabolized as single sources of carbon and energy in activated sludge systems. Excluding TBT, the presence of low concentrations of supplemental substrate did not affect the biodegradation potential of activated sludge. The acclimatization of biomass on OT compounds enhanced significantly biodegradation, resulting in significant decreases of half-lives of OT compounds. As a result in the presence of acclimatized biomass, half-lives of 1.4, 3.6, 9.8 and 5.0 days were calculated for TBT, DBT, MBT and TPhT, respectively.     

Assessment of bioclimatic conditions on Crete Island,Greece

The objective of this study was to assess and analyze the human bioclimatic conditions of Crete Island, by applying two human thermal indices: physiological equivalent temperature (PET), derived from the Munich Energy-balance Model for Individuals human energy balance model, and Universal Thermal Climate Index (UTCI), based on the Fiala multi-node model of human thermoregulation. Human bioclimatic studies provide a framework for considering the effects of climatic conditions on human beings and highlighting the social/economic factors that mitigate or amplify the consequences of environmental changes. In order to estimate the thermal effect of the environment on the human body, it has been considered that the total effects of all thermal components, not only of individual parameters, should be taken into account. The climatic data (air temperature, relative humidity, cloudiness, wind speed) used in this study were acquired from the archives of the Hellenic National Meteorological Service, regarding ten meteorological stations in Crete Island. These data, covering the 30-year period 1975–2004, were used for the calculation of PET and UTCI in order to assess thermo-physiological stress levels. The findings of this analysis, such as bioclimatic diagrams, temporal and spatial distributions of PET and UTCI as well as trends and variability, will help stake holders to understand and interpret the island’s current bioclimate, in order to make any necessary adaptations and become more resilient to the foreseen climate change.     

A Novel Affinity Chromatographic Material for the Purification of Extracellular Polyhydroxybutyrate Depolymerases

A novel affinity chromatographic material, which is composed of silica matrix, coated with polyhydroxybutyrate (PHB) powder, suitable for the purification of PHB depolymerases, was developed. The surface morphology of the PHB-silica coated particles (silica-PHB composite particles) was examined by scanning electron microscopy and revealed a successful uniform coating of silica particles with PHB. Moreover, the complex of these materials retained its homogeneity even after incubation at 80 °C for 6 h, whereas the strong binding of PHB on silica surface was further verified by thermal gravimetric analysis and by PHB extraction- from silica surface- experiments. This novel material was demonstrated to be suitable for both, the one-step on-batch and on-column purification of Thermus thermophilus extracellular PHB depolymerase. The enzyme exhibited higher affinity against the composite of silica-PHB particles than PHB powder, since the one-step purification-fold and the overall recovery of the enzyme were 2.8 and 4 times higher respectively, in the first case. Reusability of the silica-PHB composites particles was examined by determining the recoveries of PHB depolymerase. The enzyme recoveries were ranged from 30 to 35% for the first five uses, whereas for further uses recoveries gradually dropped to 15–18% indicating that the particles could be used repeatedly for five times. This material could be also a suitable support for lipases or other proteins that exhibit strong affinity to hydrophobic materials.     

Partitioning of endocrine disrupting compounds in inland waters and wastewaters discharged into the coastal area of Thessaloniki,Northern Greece

Background, aim, and scope  

In the Water Framework Directive 2000/60/EC, environmental objectives for the proper quality of inland, surface, transitional, coastal, and ground waters have been set. Member states are required to identify chemical pollutants of significance in the water bodies, to establish emission control measures, and to achieve quality standards. A specific category of pollutants are the compounds that may possess endocrine-related functions known as endocrine disrupting compounds (EDCs). This means that member states have the obligation to take action in order to prevent human exposure to these compounds via aquatic environment. The objective of this research was to study the occurrence and distribution of phenolic and steroid EDCs in inland waters and wastewaters discharged in the area of Thermaikos Gulf, Thessaloniki, Northern Greece.     

Toxaphene chemistry: separation and characterisation of selected enantiomers of the Polychloropinene mixtures

The primary goal for the study presented here was the preparation and characterisation of enantiomeric pure chlorobornane standards (Toxaphene). In this context, we partially modeled the procedure for Polychloropinene production in the former USSR. The initial reaction was ionic addition of hydrogen chloride to (1S)-alpha-pinene resulting predominantly in (1S)-2-endo-chlorobornane. Further photochlorination gave mixtures of chlorinated terpenes with different average content of Cl per molecule. The resulting mixtures were separated on a silica-gel column and a number of known hepta to decachlorobornanes were identified in fractions with the help of NMR and GC (using electron capture and mass spectrometric detection)--but in very unusual ratios as compared to the technical Toxaphene mixture formerly produced by Hercules (USA). Also several previously unknown congeners were isolated or detected. Three of the isolated congeners were obtained in crystalline state and X-ray crystallography showed their enantiomeric purity.