Removal of mercury(II) ions in aqueous solution using the peel biomass of <Emphasis Type="Italic">Pachira aquatica</Emphasis> Aubl: kinetics and adsorption equilibrium studies

Mercury is a highly toxic substance that is a health hazard to humans. This study aims to investigate powders obtained from the peel of the fruit of Pachira aquatica Aubl, in its in natura and/or acidified form, as an adsorbent for the removal of mercury ions in aqueous solution. The materials were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. The infrared spectra showed bands corresponding to the axial deformation of carbonyls from carboxylic acids, the most important functional group responsible for fixing the metal species to the adsorbent material. The thermograms displayed mass losses related to the decomposition of three major components, i.e., hemicellulose, cellulose, and lignin. The adsorption process was evaluated using cold-vapor atomic fluorescence spectrometry (CV AFS) and cold-vapor atomic absorption spectrometry (CV AAS). Three isotherm models were employed. The adsorption isotherm model, Langmuir-Freundlich, best represented the adsorption process, and the maximum adsorption capacity was predicted to be 0.71 and 0.58 mg g^?1 at 25 °C in nature and acidified, respectively. Adsorption efficiencies were further tested on real aqueous wastewater samples, and removal of Hg(II) was recorded as 69.6 % for biomass acidified and 76.3 % for biomass in nature. Results obtained from sorption experiments on real aqueous wastewater samples revealed that recovery of the target metal ions was very satisfactory. The pseudo-second-order model showed the best correlation to the experimental data. The current findings showed that the investigated materials are potential adsorbents for mercury(II) ion removal in aqueous solution, with acidified P. aquatica Aubl being the most efficient adsorbent.     

Financial liability for environmental damage: insurance market in Italy,focus on Veneto region experience

Environmental Science and Pollution Research - Making good environmental damage caused by industrial accidents and restoring impaired ecosystems may be associated with high costs. The European...     

Characterization of trace element geochemistry in continuous flow-through microcosms: a preliminary step to environmentally meaningful ecotoxicological experiments

The increasing use of freshwater/sediment microcosms in geochemical and ecotoxicological studies requires additional efforts to characterize and understand their functioning and the main parameters that can influence the pollutants' behavior and bioavailability inside the microcosms themselves. In this study, we investigated the geochemical behavior of four elements (Cr(III), Cu, Cd, and Pb) in microcosms containing one type of natural water and sediment. The microcosms were operated under flow-through conditions with continuous metal spiking (2.5-40 μgL(-1) for Cr(III) and Pb; 1.25-20 μgL(-1) for Cu and Cd) over a period of 1 month. During this period, metal concentrations and partitioning between colloidal and truly dissolved phases in the microcosm water columns showed very little variability indicating that the system rapidly reached and maintained a steady state. Metal concentrations in pore waters also showed little variability, while Cd, Cr, and Pb levels in the top layer of sediments increased linearly from day 0 to day 28 (no significant variations in sedimentary Cu levels were observed). These features make this type of microcosms particularly suitable for ecotoxicological studies with zooplanktonic or epibenthic organisms. Characterizing the geochemical properties of microcosms provides critical information for properly interpreting microcosms-based ecotoxicity data and for reducing uncertainty in laboratory-to-field extrapolation.     

Seasonal variation of pollution biomarkers to assess the impact on the health status of juvenile Pacific oysters <Emphasis Type="BoldItalic">Crassostrea gigas</Emphasis> exposed in situ

Background, aim, and scope  

In this study, a suite of sublethal stress biomarkers were analyzed in juveniles of the sentinel species, the Pacific oyster Crassostrea gigas, with a view to using them as pollution monitoring tools. The aim of this work was (1) to study baseline seasonal variations of biomarkers in different body compartments of C. gigas in the reference site and, after selecting biomarkers presenting no seasonal variations, (2) to compare responses of these biomarkers between contaminated and reference sites.     

Evaluation of a diode laser based photoacoustic instrument combined with preconcentration sampling for measuring surface–atmosphere exchange of ammonia with the aerodynamic gradient method

We present here a novel instrument for measuring surface–atmosphere exchange fluxes of ammonia. The instrument is the upgraded version of a recently developed near-infrared diode laser based photoacoustic ammonia concentration monitoring instrument, i.e. the original instrument is supplemented with two additional sampling lines, an appropriate gas handling system and an advanced software controlling gradient measurements. As a result of these developments, ammonia concentration can be measured simultaneously at three different heights above the ground and ammonia fluxes can be calculated from these data using the aerodynamic gradient method. The instrument operates fully automatically, requires minimal maintenance and has a temperature controlled, waterproof housing which makes it suitable for measurements even under harsh field conditions. Preliminary tests on stability and accuracy were carried out during two two-week field measurement campaigns, with the three sampling inlets being placed at the same height together with the inlet of a reference instrument. The readings of the three channels agreed well (with correlation coefficients above 0.96). Comparison to reference instruments showed good stability of the photoacoustic instrument, there was no measurable zero-drift or change in sensitivity during the tests. Flux measurements were carried out during a three-week field campaign in southern Scotland over fertilized grassland with reference to a wet-chemical AMANDA instrument in gradient configuration. Ammonia fluxes calculated from the data of the two instruments agreed well. Fluxes up to 2500 ng m^?2 s^?1 were observed after fertilization. The minimum detectable ammonia flux was calculated on the basis of “virtual ammonia fluxes”, from measurements carried out with all inlets at the same height and was found to be ±60 ng m^?2 s^?1 which ensures reliable measurements above intensively managed grasslands or agricultural fields.     

A new model for sustainable development: a case study of The Great Bear Rainforest regional plan

This paper describes a new model of sustainable development planning based on a case study of a successful planning process for the Great Bear Rainforest on Canada’s west coast. The planning region is an area of international ecological significance that contains one-quarter of the world’s remaining ancient coastal temperate rainforest. An innovative collaborative planning process was initiated in 1996 to develop a plan for the region that balances social, economic, and environmental values. The plan, which was accepted by consensus agreement of all stakeholders in 2006, uses a new model for sustainable regional development that is based on collaborative planning, collaborative implementation, informal conflict resolution, contextual adaptation incorporating comanagement with indigenous peoples (First Nations), joint fact finding, ecosystem-based management, and integration of social, economic, and environmental objectives.     

Trends and events through seven centuries: the history of a wetland landscape in the Czech Republic

Environmental change can be viewed as the combined result of long-term processes and singular events. While long-term trends appear to be readily available for observation (in the form of temporal comparisons or space-for-time substitution), it is more difficult to gain information on singular events in the past, although these can be equally significant in shaping ecosystems. We examined the past 700 years in the history of a lowland wetland landscape in the Czech Republic with the help of palaeoecological, ecological, landscape archaeological, and archival data. Macrofossil and pollen data were compared to known drainage works in the area and historical climatological data. Trends and events in habitat conditions were assessed using species indicator values. Results showed that ecological succession was the general process in the study area, detected as a trend towards eutrophication, desiccation, and vegetation closure. Short-term events influenced development at the sites mainly from the second half of the nineteenth century. This is consistent with drainage history, although bias related to sample frequency cannot be excluded. On the whole, long-term trends and discrete events were complementary on different scales. We conclude that humans facilitated and accelerated background processes, which can be most likely associated with the succession of open wetlands towards terrestrial ecosystems.     

Modeling to Evaluate Contribution of Oil and Gas Emissions to Air Pollution

Oil and gas production in the Western United States has increased considerably over the past 10 years. While many of the still limited oil and gas impact assessments have focused on potential human health impacts, the typically remote locations of production in the Intermountain West suggests that the impacts of oil and gas production on national parks and wilderness areas (Class I and II areas) could also be important. To evaluate this, we utilize the Comprehensive Air quality Model with Extensions (CAMx) with a year-long modeling episode representing the best available representation of 2011 meteorology and emissions for the Western United States. The model inputs for the 2011 episodes were generated as part of the Three State Air Quality Study (3SAQS). The study includes a detailed assessment of oil and gas (O&G) emissions in Western States. The year-long modeling episode was run both with and without emissions from O&G production. The difference between these two runs provides an estimate of the contribution of the O&G production to air quality. These data were used to assess the contribution of O&G to the 8 hour average ozone concentrations, daily and annual fine particulate concentrations, annual nitrogen deposition totals and visibility in the modeling domain. We present the results for the Class I and II areas in the Western United States. Modeling results suggest that emissions from O&G activity are having a negative impact on air quality and ecosystem health in our National Parks and Class I areas.

Implications: In this research, we use a modeling framework developed for oil and gas evaluation in the western United States to determine the modeled impacts of emissions associated with oil and gas production on air pollution metrics. We show that oil and gas production may have a significant negative impact on air quality and ecosystem health in some national parks and other Class I areas in the western United States. Our findings are of particular interest to federal land managers as well as regulators in states heavy in oil and gas production as they consider control strategies to reduce the impact of development.     

One-Year Study of the Elemental Composition and Source Apportionment of PM10 Aerosols in Florence,Italy

Abstract

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission–Particle-Induced γ-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM₁₀ particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.