Effectiveness and kinetics of ferrate as a disinfectant for ballast water

This study examined whether ferrate could meet the international standards for successful ballast water treatment, including final concentrations of less than 1 CFU/mL of Enterococci, less than 2.5 CFU/mL of Escherichia coli, and less than 1 CFU/100 mL of Vibrio cholerae. Pure cultures of E. coli, Klebsiella pneumoniae, and V. cholerae, and a mixed culture of Enterococcus faecium and E. faecilis were grown in saline solution to simulate ballast water and were treated with dosages of ferrate ranging from 0.25 to 5.0 mg/L. A ferrate dose of 5 mg/L resulted in complete disinfection of all organisms tested, and smaller dosages were also very effective. Tailing was consistently observed, and the Hom's model (1972) appeared to most accurately represent the action of ferrate on these organisms. Salinity and pH did not adversely affect results, and regrowth was not a problem. Ferrate shows good potential as an effective disinfectant in the treatment of ballast water.     

National Prevention through Design (PtD) Initiative

INTRODUCTION: The most effective means of preventing and controlling occupational injuries, illness, and fatalities is to "design out" hazards and hazardous exposures from the workplace. There is a long history of designing for safety for the general public and to a lesser degree for workers. METHOD: We now have the experience and insight from thoughtful, previous efforts to call for a comprehensive national strategy to implement a Prevention through Design (PtD) Initiative. RESULTS: This paper describes that initiative in terms of four overarching areas where action can be directed: practice, policy, research, and education. To obtain stakeholder input for issues in these four areas and to focus implementation efforts, eight sector divisions of the economy will be addressed. A seven year strategy is envisioned.     

Investigation on the heavy-metal content of zinc-air button cells

Within the framework of a German government project (initiated by the Federal Environment Agency) to check the compliance of commercially available batteries with the German Battery Ordinance concerning their heavy metal contents, 18 different types of commercially available zinc-air button cells were analysed for their cadmium, lead and mercury contents. After microwave assisted dissolution with aqua regia, Cd and Pb were determined using inductively coupled plasma mass spectrometry (ICP-MS), and Hg was determined using inductively coupled plasma optical emission spectrometry (ICP OES) and atomic absorption spectrometry. Cd contents were found to be much lower than the permitted limits; Pb contents were also found to be below the limits. Hg contents were found to be near the limits, and in one case the limit was exceeded.     

Serum concentrations of indicator PCB congeners in the Czech adult population

In 2006, levels of seven indicator polychlorinated biphenyl congeners (PCB28, 52, 101, 118, 138, 153, and 180) in blood serum of 202 blood donors residing for more than 2 years in five urban areas included in the Czech Human Biomonitoring project were measured by GC/MS/MS method. PCB congeners 138, 153 and 180 accounted for about 97% of the sum of the indicator congeners analyzed. Overall, the median and 95th percentile of the most abundant congener PCB 153 were 438 ng/g lipid and 1079 ng/g lipid, respectively. The highest median levels were found in Uherské Hradiste (669 ng/g lipid) and Ostrava (672 ng/g lipid in males compared to 341 ng/g lipid in females). Serum PCB concentrations were significantly associated with age, gender, place of residence and smoking habit, but not with body mass index and education. The results suggest the importance of PCB body burden in the Czech general population and the existence of hot spots.     

Immissionsbelastungen im Umfeld des Flughafens München

The airborne immissions in the eastern surroundings to the new Munich airport have been investigated by means of different analytical methods between 1992 and 1995. For a detection of environmental impacts, bioindicators were applied to determine the pollution by PAH and to quantify the pollution by photooxidants. In addition, the PAH content in the upper soil layer was determined. During high pressure weather periods in summer the actual air pollution was investigated in the course of seven measuring campaigns. The PAH pollution of the soil is typical for rural background sites with highest concentrations in the close vicinity of busy roads, and exhibits no temporary trend. The actual input of PAH does not differ from the typical situation of rural regions in Bavaria at any measuring sites at all. Road traffic can be identified as the main PAH source in summer, whereas the considerably higher pollution in winter can be related to domestic heating. The pollution by photooxidants was found to be rather homogeneous throughout the eastern surroundings to the airport, being lowest at the sites directly influenced by road traffic. The pollution by volatile hydrocarbons at a busy road junction in the city of Erding is considerably higher than in the rural vicinity of the airport. The concentrations exhibit distinct daily courses which, among other things, can be related to atmospheric photooxidation. The hydroperoxides as secondary air pollutants exhibit an inverse course similar to that of ozone, with maximum values in the afternoon.     

Terricolous alpine lichens are sensitive to both load and concentration of applied nitrogen and have potential as bioindicators of nitrogen deposition

The influence of applied nitrogen (N) concentration and load on thallus chemistry and growth of five terricolous alpine lichen species was investigated in a three-month N addition study. Thallus N content was influenced by both concentration and load; but the relative importance of these parameters varied between species. Growth was most affected by concentration. Thresholds for effects observed in this study support a low critical load for terricolous lichen communities (<7.5 kg N ha⁻¹ y⁻¹) and suggest that concentrations of N currently encountered in UK cloudwater may have detrimental effects on the growth of sensitive species. The significance of N concentration effects on sensitive species also highlights the need to avoid artificially high concentrations when designing N addition experiments. Given the sensitivity of some species to extremely low loads and concentrations of N we suggest that terricolous lichens have potential as indicators of deposition and impact in northern and alpine ecosystems.     

Screening CO2 storage options in The Netherlands

This paper describes the development and application of a methodology to screen and rank Dutch reservoirs suitable for long-term large scale CO₂ storage. The screening focuses on off- and on-shore individual aquifers, gas and oil fields. In total 176 storage reservoirs have been taken into consideration: 138 gas fields, 4 oil fields and 34 aquifers, with a total theoretical storage potential of about 3200 Mt CO₂. The reservoirs are screened according to three criteria: potential storage capacity, storage costs and effort needed to manage risk. Due to the large number of reservoirs, which limits the possibility to use any pair-wise comparison method (e.g. Multi-Criteria programs such as Bosda or Naiade), a spreadsheet tool was designed to provide an assessment of each of the criteria through an evaluation of the fields present in the database and a set of scores provided by a (inter)national panel of experts. The assessment is sufficiently simple and allows others to review it, re-do it or expand it. The results of the methodology show that plausible comparisons of prospective sites with limited characterization data are possible.     

Prospects for cost-effective post-combustion CO2 capture from industrial CHPs

Industrial Combined Heat and Power plants (CHPs) are often operated at partial load conditions. If CO₂ is captured from a CHP, additional energy requirements can be fully or partly met by increasing the load. Load increase improves plant efficiency and, consequently, part of the additional energy consumption would be offset. If this advantage is large enough, industrial CHPs may become an attractive option for CO₂ capture and storage CCS. We therefore investigated the techno-economic performance of post-combustion CO₂ capture from small-to-medium-scale (50–200 MWe maximum electrical capacity) industrial Natural Gas Combined Cycle- (NGCC-) CHPs in comparison with large-scale (400 MWe) NGCCs in the short term (2010) and the mid-term future (2020–2025). The analyzed system encompasses NGCC, CO₂ capture, compression, and branch CO₂ pipeline.The technical results showed that CO₂ capture energy requirement for industrial NGCC-CHPs is significantly lower than that for 400 MWe NGCCs: up to 16% in the short term and up to 12% in the mid-term future. The economic results showed that at low heat-to-power ratio operations, CO₂ capture from industrial NGCC-CHPs at 100 MWe in the short term (41–44 €/tCO₂ avoided) and 200 MWe in the mid-term future (33–36 €/tCO₂ avoided) may compete with 400 MWe NGCCs (46–50 €/tCO₂ avoided short term, 30–35 €/tCO₂ avoided mid-term).     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.