Technician Training in Environmental Health Science

In colleges and universities across the country, courses in ecology and environmental science are among the newest additions to the catalog. The goal of such courses is to make students aware of the environmental dilemma, a just and necessary goal. However, there is a need to do more than this. Jobs dealing with environmental protection are becoming more and more complex due to the recent passage of State and Federal legislation, which includes the Clean Air Act, the Amendments to the Water Pollution Control Act and the Occupational Safety and Health Act, just to name a few. Trained personnel are needed by industry and government. For this reason, in 1971, Middlesex County College initiated an Environmental Health Science Technology Program.     

Filtration Properties of Fly Ash from Fluidized Bed Combustion

Some of the features of the fluidized-bed combustion (FBC) process have a direct bearing on the particulate properties that most strongly influence filtering pressure drop. A laboratory program was conducted to experimentally determine the relative pressure drop characteristics of ashes from the TVA-EPRI 20-MW bubbling bed, atmospheric pressure FBC (AFBC) pilot plant and six pulverized-coal combustion (PC) units. The combined influences of measured particle and dust cake properties on filtering pressure drop were estimated with existing filtration theories. These theories predict a higher pressure drop for a dust cake produced with the AFBC ash than for one consisting of any of the PC ashes. Laboratory measurements were made of the flow resistance of idealized, simulated dust cakes to confirm these predictions. Field operating data from the fabric filters collecting some of the tested ashes were available to validate the laboratory results. The laboratory and field data show relatively good agreement. The AFBC ash must be treated as a special case for fabric filters, and careful selection of cleaning method and fabric must be made to minimize the inherently high pressure drop characteristics of this ash.     

Threshold Dependence of Mortality Effects for Fine and Coarse Particles in Phoenix,Arizona

ABSTRACT

Daily data for fine (<2.5 um) and coarse (2.5-10 um) particles are available for 1995-1997 from the U.S. Environmental Protection Agency (EPA) research monitor in Phoenix, AZ. Mortality effects on the 65 and over population were studied for both the city of Phoenix and for a region of about 50 mi around Phoenix. Coarse particles in Phoenix are believed to be natural in origin and spatially homogeneous, whereas fine particles are primarily vehicular in origin and concentrated in the city itself. For this reason, it is natural to focus on city mortality data when considering fine particles, and on region mortality data when considering coarse particles, and most of the results reported here correspond to those assignments.

After allowing for seasonality and long-term trend through a nonlinear (B-spline) trend curve, and also for meteorological effects based on temperature and specific humidity, a regression of mortality was performed on PM using several different measures for PM. Based on a linear PM effect, we found a statistically significant coefficient for coarse particles, but not for fine particles, contrary to what is widely believed about the effects of coarse and fine particles. An analysis of nonlinear pollution-mortality relationships, however, suggests that the true picture is more complicated than that. For coarse particles, the evidence for any nonlinear or threshold-based effect is slight. For fine particles, we found evidence of a threshold, most likely with values in the range of 20-25 ug/m³. We also found some evidence of interactions of the PM effects with season and year.

The main effect here is an apparent seasonal interaction in the coarse PM effect. An attempt was made to explain this in terms of seasonal variation in the chemical composition of PM, but this led to another counterintuitive result: the PM effect is highest in spring and summer, when the anthropogenic concentration of coarse PM is lowest as determined by a principal components analysis. There was no evidence of confounding between the fine and coarse PM effects. Although these results are based on one city and should be considered tentative until replicated in other studies, they suggest that the prevailing focus on fine rather than coarse particles may be an oversimplification. The study also shows that consideration of nonlinear effects can lead to real changes of interpretation and raises the possibility of seasonal effects associated with the chemical composition of PM.     

The Missoula Valley Semivolatile and Volatile Organic Compound Study: Seasonal Average Concentrations

Abstract

The city of Missoula is located in a high mountain valley (elevation 3200 ft) in western Montana and contains one of the largest populations in the entire Rocky Mountain Region completely enclosed by mountains. During the 2000/2001 Missoula Valley Sampling Program, ambient levels of 61 semivolatile organic compounds (SVOCs) and 54 volatile organic compounds (VOCs) were originally quantified before refining the analytical program to 28 of the most prominent SVOCs and VOCs found in the Missoula Valley airshed. These compounds were measured over 24-hr periods at two locations throughout an entire year. This study provides the first, comprehensive appraisal of the levels of SVOCs and VOCs measured simultaneously throughout all four seasons at two locations in the Missoula Valley, including those levels measured during the 2000 Montana wildfire season. Generally, SVOC levels were comparable between both sides of the Missoula Valley. However, there were nearly double the amount of VOCs measured at the more urban Boyd Park site compared with the rural Frenchtown sampling site, a result of the greater number of automobiles on the eastern side of the Valley. SVOCs and VOCs were measured at their highest levels of the sampling program during the winter. Forest fire smoke samples collected during the summer of 2000 showed significant increases in SVOC phenolic compounds, including phenol, 2-methylphenol, 4-methylphenol, and 2,4-dimethylphenol. Although there were modest increases in some of the other SVOCs and VOCs measured during the fire season, none of the increases were as dramatic as the phenolics.     

Field Method Comparison between Passive Air Samplers and Continuous Monitors for VOCs and NO2 in El Paso,Texas

Abstract

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO₂) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO₂ and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (<5% relative standard deviation, RSD) were found for NO₂ measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (≥7% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO₂ samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs.     

Integrating Remediation and Reuse to Achieve Whole‐System Sustainability Benefits

This perspective article was prepared by members of the Sustainable Remediation Forum (SURF), a professional nonprofit organization seeking to advance the state of sustainable remediation within the broader context of sustainable site reuse. SURF recognizes that remediation and site reuse, including redevelopment activities, are intrinsically linked—even when remediation is subordinate to or sometimes a precursor of reuse. Although the end of the remediation life cycle has traditionally served as the beginning of the site's next life cycle, a disconnect between these two processes remains. SURF recommends a holistic approach that brings together remediation and reuse on a collaborative parallel path and seeks to achieve whole‐system sustainability benefits. This article explores the value of integrating remediation into the reuse process to fully exploit synergies and minimize the costs and environmental impacts associated with bringing land back into beneficial use. © 2013 Wiley Periodicals, Inc.     

Value of intelligence applied to networks

A methodology is proposed to complement the subjective “value” of intelligence with an objective metric of “impact” of information on network models. This is a deterministic one-way sensitivity analysis similar to value of information used in inference diagrams. It would measure the impact of a piece of information on a network’s metric, in this case being used to answer intelligence analyst questions. This methodology suggests that the sensitivity of each link to existing analysis implies that the link has an impact on the analysis. The impact of these links can be measured quantitatively. In this paper, we explore data of tweets and apply the methodology to the links between twitter users and use the network measure of betweenness centrality to determine their quantitative impact on the overall network.     

Transport of Escherichia coli through variably saturated sand columns and modeling approaches

A sand column leaching system with well-controlled suction and flow rate was built to investigate the effects on bacterial transport of air-water interface effects (AWI) correlated to water content, particle size, and column length. Adsorption of Escherichia coli strain D to silica sands was measured in batch tests. The average % adsorption for coarse and fine sands was 45.9+/-7.8% and 96.9+/-3.2%, respectively. However, results from static batch adsorption experiments have limited applicability to dynamic bacterial transport in columns. The early breakthrough of E. coli relative to bromide was clear for all columns, namely c. 0.15 to 0.3 pore volume earlier. Column length had no significant effects on the E. coli peak concentration or on total recovery in leachate, indicating retention in the top layer of sands. Tailing of breakthrough curves was more prominent for all fine sand columns than their coarse sand counterparts. Bacterial recovery in leachate from coarse and saturated sand columns was significantly higher than from fine and unsaturated columns. Observed data were fitted by the convection-dispersion model, amended for one-site and two-site adsorption to particles, and for air-water interface (AWI) adsorption. Among all models, the two-site+AWI model achieved consistently high model efficiency for all experiments. Thus it is evident from experimental and modeling results that AWI adsorption plays an important role in E. coli transport in sand columns.     

Phosphate complexation model and its implications for chemical phosphorus removal

A phosphate complexation model is developed, in an attempt to understand the mechanistic basis of chemically mediated phosphate removal. The model presented here is based on geochemical reaction modeling techniques and uses known surface reactions possible on hydrous ferric oxide (HFO). The types of surface reactions and their reaction stoichiometry and binding energies (logK values) are taken from literature models of phosphate interactions with iron oxides. The most important modeling parameter is the proportionality of converting moles of precipitated HFO to reactive site density. For well-mixed systems and phosphate exposed to ferric chloride during HFO precipitation, there is a phosphate capacity of 1.18 phosphate ions per iron atom. In poorly mixed systems with phosphate exposed to iron after HFO formation, the capacity decreased to 25% of the well-mixed value. The same surface complexation model can describe multiple data sets, by varying only a single parameter proportional to the availability of reactive oxygen functional groups. This reflects the unavailability of reactive oxygen groups to bind phosphate. Electron microscope images and dye adsorption experiments demonstrate changes in reactive surface area with aging of HFO particles. Engineering implications of the model/mechanism are highlighted.