Bisphenol A and Bisphenol S release in milk under household conditions from baby bottles marketed in Italy

A simple and sensitive validated analytical method based on liquid chromatography coupled to tandem fluorescence (FD) and ultraviolet (UV) spectrophotometry was applied to monitor the presence of bisphenol A and bisphenol S in plastic baby bottles marketed in Italy. The limits of detection (LOD) were 3.75 ng mL^?1 and 80.00 ng mL^?1, and those of quantification (LOQ) were 12.51 ng mL^?1 and 260.00 ng mL^?1 for BPA (FD detection) and for BPS (UV detection), respectively. BPA was found in only four samples, two samples undergone to microwave heating and two samples undergone to bottle warmer heating either at 40°C or at 80°C. Although the quantities of leached BPA were well below the reference dose for daily intake established by the European Food Safety Authority (EFSA) (4.0 µg kg^?1 bw/day), the release of BPA and BPS from these plastic materials should be carefully considered by the government authorities to increase people's awareness on this issue and to protect the most vulnerable population group.     

Autotrophic nitrogen removal for decentralized treatment of ammonia-rich industrial textile wastewater: process assessment,stabilization and modelling

Environmental Science and Pollution Research - Digital textile printing (DTP) is a game-changer technology that is rapidly expanding worldwide. On the other hand, process wastewater is rich in...     

Risk factors associated with bus accident severity in the United States: A generalized ordered logit model

IntroductionRecent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act of 2011.MethodThe current study investigates the underlying risk factors of bus accident severity in the United States by estimating a generalized ordered logit model. Data for the analysis are retrieved from the General Estimates System (GES) database for the years 2005–2009.ResultsResults show that accident severity increases: (i) for young bus drivers under the age of 25; (ii) for drivers beyond the age of 55, and most prominently for drivers over 65 years old; (iii) for female drivers; (iv) for very high (over 65 mph) and very low (under 20 mph) speed limits; (v) at intersections; (vi) because of inattentive and risky driving.     

A flux-based assessment of the effects of ozone on foliar injury, photosynthesis, and yield of bean (Phaseolus vulgaris L. cv. Borlotto Nano Lingua di Fuoco) in open-top chambers

Stomatal ozone uptake, determined with the Jarvis' approach, was related to photosynthetic efficiency assessed by chlorophyll fluorescence and reflectance measurements in open-top chamber experiments on Phaseolus vulgaris. The effects of O₃ exposure were also evaluated in terms of visible and microscopical leaf injury and plant productivity. Results showed that microscopical leaf symptoms, assessed as cell death and H₂O₂ accumulation, preceded by 3-4 days the appearance of visible symptoms. An effective dose of ozone stomatal flux for visible leaf damages was found around 1.33 mmol O₃ m⁻². Significant linear dose-response relationships were obtained between accumulated fluxes and optical indices (PRI, NDI, ΔF/F_m^′). The negative effects on photosynthesis reduced plant productivity, affecting the number of pods and seeds, but not seed weight. These results, besides contributing to the development of a flux-based ozone risk assessment for crops in Europe, highlight the potentiality of reflectance measurements for the early detection of ozone stress.     

Crown condition surveys in Italian forests: issues in reporting findings

This study examines defoliation and discoloration findings collected throughout the Italian Level I network between 1997 and 2000. Prior to this period no Quality Assurance procedures had been implemented, so that earlier findings cannot be considered reliable. The aim of the study is to compare differentindices used in reporting findings, in order to determine the full potential and limitations of each. In international surveys,findings are normally expressed in terms of individual trees presenting a defoliation level greater than 2 %; this criterion,however, has been challenged since it is not based on scientificevidence. By analysing the distribution of defoliation values(grouped in 5% classes) relating to the main species (Fagus sylvatica, Quercus pubescens, Quercus cerris, Picea abies), the study examines the behaviour of statistical indices such as the median, the mode and the mean. Instead of using the traditional 25% threshold to determine the part of the population with the highest defoliation values, a procedureis suggested whereby a different threshold can be determined foreach species. It is established based on the 90° percentile of cumulative defoliation values recorded over the four-year period. Each index used to report findings possessesits own information potential, and the findings may at times appear contradictory. The use of a combined defoliation and discoloration index (Ilce = Lacking Crown Equivalent Index) is also proposed, but the results obtained do not differin substance from the results relating to defoliation alone. Thefunctional limitations of this index are due mainly to the way the data are collected: for this reason suggestions are made onhow to improve the procedure in future surveys.     

Zooplankton responses to hydrological and trophic variability in a Mediterranean coastal ecosystem (Lesina Lagoon,South Adriatic Sea)

Spatial and temporal variability in zooplankton was studied at eight stations located in the Lesina Lagoon (South Adriatic Sea) Salinity, temperature, dissolved oxygen and chlorophyll a (in the lagoon) at these stations were also assessed. The zooplankton community was characterised by clear seasonal oscillations and mostly represented by copepods and their larvae. The dominant copepod species were Calanipeda aquaedulcis and Acartia tonsa, which exhibited spatial–temporal segregation in the lagoon. C. aquaedulcis copepodites seemed to be better adapted to oligotrophic and oligohaline conditions compared with the A. tonsa population. The invasive species A. tonsa has completely replaced the formerly abundant Acartia margalefi. A positive correlation was found between abundances, total species numbers and trophic state. An increasing abundance trend was shown from the lagoon towards the sea. The highest diversity indices were recorded at the two channel inlets, during high tide due to the absence of a clear dominance of one or more coastal species and the co-occurrence of species of lagoon and marine origin.     

Remediation of heavy metals contaminated soils by ball milling

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.     

Estimates of ozone AOT40 from passive sampling in forest sites in South-Western Europe

Weekly-fortnightly ozone (O3) concentrations measured by passive sampling at 81 forest monitoring plots in France, Italy, Spain and Switzerland over the period 2000-2002 were used to estimate the cumulative exposure index AOT40. The estimation method is based on a deterministic model which describes the O3 daily profile as a function of relative altitude (the difference between the altitude of the site and the lowest altitude within a 5 km radius) and the time of the day. Estimated AOT40 values (AOT40(e)) were evaluated against co-located automatic measurement stations and with 14 independent automatic stations located throughout Italy whose weekly mean O3 values were used to simulate passive samplers. AOT40 can be predicted by modelling passive sampling data (R2: 0.90; P<0.0001, SE of estimates: 3271 ppb h), although considerable deviations can occur for individual sites. Estimated AOT40 shows a distinct, significant latitudinal and altitudinal gradient. Taking the 3-year average as a whole, exceedance of critical level of 5000 ppb h occurs at 77-100% of the monitored sites, respectively.     

A multi-objective approach to solid waste management

The issue addressed in this paper consists in the localization and dimensioning of transfer stations, which constitute a necessary intermediate level in the logistic chain of the solid waste stream, from municipalities to the incinerator. Contextually, the determination of the number and type of vehicles involved is carried out in an integrated optimization approach. The model considers both initial investment and operative costs related to transportation and transfer stations. Two conflicting objectives are evaluated, the minimization of total cost and the minimization of environmental impact, measured by pollution. The design of the integrated waste management system is hence approached in a multi-objective optimization framework. To determine the best means of compromise, goal programming, weighted sum and fuzzy multi-objective techniques have been employed. The proposed analysis highlights how different attitudes of the decision maker towards the logic and structure of the problem result in the employment of different methodologies and the obtaining of different results. The novel aspect of the paper lies in the proposal of an effective decision support system for operative waste management, rather than a further contribution to the transportation problem. The model was applied to the waste management of optimal territorial ambit (OTA) of Palermo (Italy).