Environmental and economic assessment methods for waste management decision-support: possibilities and limitations.

A large number of methods and approaches that can be used for supporting waste management decisions at different levels in society have been developed. In this paper an overview of methods is provided and preliminary guidelines for the choice of methods are presented. The methods introduced include: Environmental Impact Assessment, Strategic Environmental Assessment, Life Cycle Assessment, Cost-Benefit Analysis, Cost-effectiveness Analysis, Life-cycle Costing, Risk Assessment, Material Flow Accounting, Substance Flow Analysis, Energy Analysis, Exergy Analysis, Entropy Analysis, Environmental Management Systems, and Environmental Auditing. The characteristics used are the types of impacts included, the objects under study and whether the method is procedural or analytical. The different methods can be described as systems analysis methods. Waste management systems thinking is receiving increasing attention. This is, for example, evidenced by the suggested thematic strategy on waste by the European Commission where life-cycle analysis and life-cycle thinking get prominent positions. Indeed, life-cycle analyses have been shown to provide policy-relevant and consistent results. However, it is also clear that the studies will always be open to criticism since they are simplifications of reality and include uncertainties. This is something all systems analysis methods have in common. Assumptions can be challenged and it may be difficult to generalize from case studies to policies. This suggests that if decisions are going to be made, they are likely to be made on a less than perfect basis.     

Rapid and radical amniodrainage in the treatment of severe twin–twin transfusion syndrome†

We have evaluated the role of a rapid and radical method of amniodrainage in the treatment of severe twin–twin transfusion. The outcome of 15 patients with severe twin–twin transfusion for which a amniodrainage was performed by means of a vacuum bottle system was compared with the outcome of 15 patients with a similar condition, matched for gestational age at the time of the initial procedure and drained using a standard procedure. In the study group the amniodrainage ended when no amniotic fluid could be aspirated, whereas the women in the standard group were drained with a syringe system and the fluid was removed until the deepest amniotic fluid pool was <8 cm. At the initial procedure, the mean volume of amniotic fluid drained was significantly (p<0.05) higher (3252 vs 2153 ml) and the length of the procedure significantly (p<0.001) shorter (21 vs 41 min) in the study group than in the standard group. The mean post-procedure amniotic fluid index was significantly (p<0.001) smaller (2.9 vs 7.7 cm) after radical amniodrainage than after the standard amniodrainage. The mean number of procedures was significantly (p<0.001) lower (1.5 vs 5.6) in the study group compared to the standard group. In the study group the mean placental thickness increased significantly (p<0.001) from 9 mm before the procedure to 49 mm after, and the overall perinatal survival rate was 80% and the proportion of pregnancies with at least one survivor was 93%. The present data indicate that early, rapid and radical amniodrainage is an effective and low-cost therapy for severe twin–twin transfusion syndrome. Compared to the standard amniodrainage technique it also appears to reduce the need for multiple procedures. Copyright © 2001 John Wiley & Sons, Ltd.     

Assessment of the effects of soil PAH accumulation by a battery of ecotoxicological tests

Surface soils were collected at remote, urban and industrial sites in the Southern of Italy in order to evaluate PAH concentrations and assess the toxic effects by a battery of ecotoxicological tests. The tests were performed on whole soils and on both organic and aqueous extracts. Further goal of this study was to integrate the results coming from each test and matrix in a synthetic toxicity index. The highest summation sigmaPAH concentrations were measured at the industrial soil, although this one did not show an high ecotoxicological risk. Among the performed tests, the phytotoxicity tests showed the highest sensitivity. For whole soil, the worst case always has been represented by test through bacteria. Our results could represent the first step toward the selection of a proper battery to characterize the soil ecotoxicological risk.     

Degradation of polycyclic aromatic hydrocarbons by combined chemical pre-oxidation and bioremediation in creosote contaminated soil

The ability of pre-oxidation to overcome polycyclic aromatic hydrocarbons (PAH) recalcitrance to biodegradation was investigated in creosote contaminated soil. Sand and peat artificially spiked with creosote (quality WEI C) were used as model systems. Ozonation and Fenton-like treatment were proved to be feasible technologies for PAH degradation in soil. The efficiency of ozonation was strongly dependent on the water content of treated soil samples. The removal of PAH by Fenton-like treatment depended on the applied H2O2/soil weight ratio and ferrous ions addition. It was determined that the application of chemical oxidation in sand resulted in a higher PAH removal and required lower oxidant (ozone, hydrogen peroxide) doses. The enhancement of PAH biodegradability by different pre-treatment technologies also depended on the soil matrix. It was ascertained that combined chemical and biological treatment was more efficient in PAH elimination in creosote contaminated soil than either one alone. Thus, the combination of Fenton-like and the subsequent biological treatment resulted in the highest removal of PAH in creosote contaminated sand, and biodegradation with pre-ozonation was found to be the most effective technology for PAH elimination in peat.     

Changing ideas in forestry: A comparison of concepts in Swedish and American forestry journals during the early twentieth and twenty-first centuries

By combining digital humanities text-mining tools and a qualitative approach, we examine changing concepts in forestry journals in Sweden and the United States (US) in the early twentieth and early twenty-first centuries. Our first hypothesis is that foresters at the beginning of the twentieth century were more concerned with production and less concerned with ecology than foresters at the beginning of the twenty-first century. Our second hypothesis is that US foresters in the early twentieth century were less concerned with local site conditions than Swedish foresters. We find that early foresters in both countries had broader—and often ecologically focused—concerns than hypothesized. Ecological concerns in the forestry literature have increased, but in the Nordic countries, production concerns have increased as well. In both regions and both time periods, timber management is closely connected to concerns about governance and state power, but the forms that governance takes have changed.     

The influence of sorption material preparation on the removal of metal ions from the aqueous solution

ABSTRACT

Very important in adsorption processes is the preparation of material sorbents and from this reason, the impact of washing agent of raw sorbent was analysed. The adsorption capacity was studied in relation to the function of the equilibrium time, the amount of biosorbent and the initial metal(II) ions concentration. In this research for the sake of comparison, the sorptive properties of out-of-date coffee were compared to coffee washed with different agents (mineral acids and water). The scanning electron microscopy and Fourier transform infrared spectroscopy were used to characterise the biosorbents and to identify the functional groups that participated in metal(II) ions bonding. The obtained results clearly indicate that the out-of-date coffee are effective biosorbent for cadmium(II) and nickel(II) ions from aqueous solution. However, for metal(II) ions removal efficiency could influence sorbent preparation and nickel(II) ions were best adsorbed on coffee washed with water, but cadmium(II) ions on raw biosorbent (out-of-date coffee). The best results of sorption were achieved after the contact time of 30 and 60?min, respectively for cadmium(II) and nickel(II) ions.     

Life cycle modelling of fossil fuel power generation with post-combustion CO2 capture

Due to its compatibility with the current energy infrastructures and the potential to reduce CO₂ emissions significantly, CO₂ capture and geological storage is recognised as one of the main options in the portfolio of greenhouse gas mitigation technologies being developed worldwide. The CO₂ capture technologies offer a number of alternatives, which involve different energy consumption rates and subsequent environmental impacts. While the main objective of this technology is to minimise the atmospheric greenhouse gas emissions, it is also important to ensure that CO₂ capture and storage does not aggravate other environmental concerns. This requires a holistic and system-wide environmental assessment rather than focusing on the greenhouse gases only. Life Cycle Assessment meets this criteria as it not only tracks energy and non-energy-related greenhouse gas releases but also tracks various other environmental releases, such as solid wastes, toxic substances and common air pollutants, as well as the consumption of other resources, such as water, minerals and land use. This paper presents the principles of the CO₂ capture and storage LCA model developed at Imperial College and uses the pulverised coal post-combustion capture example to demonstrate the methodology in detail. At first, the LCA models developed for the coal combustion system and the chemical absorption CO₂ capture system are presented together with examples of relevant model applications. Next, the two models are applied to a plant with post-combustion CO₂ capture, in order to compare the life cycle environmental performance of systems with and without CO₂ capture. The LCA results for the alternative post-combustion CO₂ capture methods (including MEA, K⁺/PZ, and KS-1) have shown that, compared to plants without capture, the alternative CO₂ capture methods can achieve approximately 80% reduction in global warming potential without a significant increase in other life cycle impact categories. The results have also shown that, of all the solvent options modelled, KS-1 performed the best in most impact categories.     

Age dependency of high-affinity ouabain receptors and their magnetosensitivity

Age dependency of [³H]-ouabain binding, ⁴⁵Ca²⁺ eflux and its magnetosensitivity in rats’ brain cortex and heart muscle tissues were studied. Curves of dose-dependent [³H]-ouabain binding consisted of three components with different affinities (10⁻⁷–10⁻⁴ M (α₁); 10⁻⁹–10⁻⁷ M (α₂); and 10⁻¹¹–10⁻⁹ M (α₃)). These curves were also characterized by different dose-dependent kinetics. [³H]-ouabain binding with α₃ receptors in brain cortex and heart muscle tissues of young and adult animals had a dose-dependent character, while that in old ones had a dose-independent character. A 0.2 T static magnetic field (SMF) exposure had modulation effect on ouabain binding with α₁, α₂ and α₃ receptors in young rats, while in adult ones, only α₃ receptors were magnetosensitive. In old animals, SMF exposure had no significant effect on ouabain binding with α₃ receptors in brain cortex, while in heart muscle, it had inhibitory effect on it. Age-dependent effect of ouabain impact on ⁴⁵Ca²⁺ efflux showed that all concentrations of ouabain lead to inhibitory effect in young animals’ brain cortex and heart muscle (with the exception of 10⁻¹⁰ and 10⁻⁶ M), while in old ones, it had activation effect as compared with data received without ouabain. SMF exposure in young animals had activation effect on ⁴⁵Ca²⁺ efflux from brain cortex and heart muscle in data without ouabain, and in old rats, ⁴⁵Ca²⁺ efflux from brain cortex was magnetic insensitive. In old animals, SMF increased ⁴⁵Ca²⁺ efflux even after extra low concentration of ouabain. It is suggested that α₃ receptors having a crucial role in the regulation of Na⁺/Ca²⁺ exchange serve as age-dependent magnetosensors of excitable cells.     

Approximation and spatial regionalization of rainfall erosivity based on sparse data in a mountainous catchment of the Yangtze River in Central China

In densely populated countries like China, clean water is one of the most challenging issues of prospective politics and environmental planning. Water pollution and eutrophication by excessive input of nitrogen and phosphorous from nonpoint sources is mostly linked to soil erosion from agricultural land. In order to prevent such water pollution by diffuse matter fluxes, knowledge about the extent of soil loss and the spatial distribution of hot spots of soil erosion is essential. In remote areas such as the mountainous regions of the upper and middle reaches of the Yangtze River, rainfall data are scarce. Since rainfall erosivity is one of the key factors in soil erosion modeling, e.g., expressed as R factor in the Revised Universal Soil Loss Equation model, a methodology is needed to spatially determine rainfall erosivity. Our study aims at the approximation and spatial regionalization of rainfall erosivity from sparse data in the large (3,200 km²) and strongly mountainous catchment of the Xiangxi River, a first order tributary to the Yangtze River close to the Three Gorges Dam. As data on rainfall were only obtainable in daily records for one climate station in the central part of the catchment and five stations in its surrounding area, we approximated rainfall erosivity as R factors using regression analysis combined with elevation bands derived from a digital elevation model. The mean annual R factor (R _a) amounts for approximately 5,222 MJ?mm?ha^?1?h^?1?a^?1. With increasing altitudes, R _a rises up to maximum 7,547 MJ?mm ha^?1?h^?1 a^?1 at an altitude of 3,078 m a.s.l. At the outlet of the Xiangxi catchment erosivity is at minimum with approximate R _a?=?1,986 MJ?mm?ha^?1?h^?1?a^?1. The comparison of our results with R factors from high-resolution measurements at comparable study sites close to the Xiangxi catchment shows good consistance and allows us to calculate grid-based R _a as input for a spatially high-resolution and area-specific assessment of soil erosion risk.