Degradation of Polycaprolactone Modified with TPS or CaCO3 in Biotic/Abiotic Seawater

This paper is an investigation of the polymer degradation process in two types of seawater (with and without microorganisms) sourced from the Baltic Sea. The chosen polymeric materials were polycaprolactone modified with either thermoplastic starch (PCL/TPS?>?85%) or calcium carbonate (60% PCL/40% CaCO₃) compared directly against unmodified polycaprolactone. All samples were incubated for 28?weeks in seawater with and without microorganisms under laboratory conditions and analysed before and after the degradation process. Weight loss analysis, microscopic observations of polymer surfaces and tensile strength tests were used to determine the progress of polymer degradation. The experimental results obtained indicated, that in each of the experiments, degradation of tested polymeric samples occured. The process was more effective in seawater with microorganisms compared against systems without added microorganisms. The experiment in seawater demonstrated that modification of PCL with calcium carbonate did not encourage the degradation process; and in some circumstances inhibited it.     

PET from Used Beverage Bottles: A Material for Preparation of Biologically Degradable Copolyesters

Poly(ethylene terephthalate) from used colorless beverage bottles was solvolyzed by ethane-1,2-diol. Hydroxyl end-groups present in the mixture of polyols formed were used to initiate the polymerization of ??-caprolactone (CLO) at 190?°C. Polycondensation (190?°C) of the reaction mixture containing an equilibrium amount of lactone corresponding to the reaction temperature yield an aliphatic?Caromatic copolyester. A variety of copolyesters containing 20?C60?mol. % CLO structural units was prepared. The microstructure of their macromolecules was analyzed using ¹H?NMR spectroscopy. Copolyesters were characterized by thermal analysis and tensile tests and their biodegradation potential was checked by the composting test.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Model reactions of chromium compounds with mammalian and bacterial cells†

Chromate uptake, reduction, cytotoxicity and mutagenicity were studied with human red blood cells, Chinese hamster ovary (CHO) cells and/or Salmonella typhimurium mutant cells. All cell types rapidly took up chromates whereas chromium(III) salts were excluded under the experimental conditions. Red blood cells reduced and accumulated chromium from chromate. At concentrations above 0.1 mM, chromate inactivated the red cell chromate carrier. Chromate above 0.01 mM inhibited CHO cell proliferation irrespective of the cations present. Chromate and two chromium(III) complexes were mutagenic with Salmonella mutants in the Ames’ assay. A model for chromate metabolism and genotoxicity is proposed.     

Book reviews and notices

The aim of sustainable development is to balance social, economic, and environmental needs. In order to justify the decisions they make, stakeholders must quantify the different impacts found in the operations and developments of companies and/or projects throughout their life cycle. However, as some areas are subjective in nature, the quantification process of the different impacts and the assessment of sustainable development performance become arduous tasks of development, validation, and application of scientific and empirical methods with the intrinsic objective of finding an agreement among the involved parties (i.e., stakeholders). Several environmental and sustainability assessment tools, instruments, processes, and methodologies have been developed; rating systems stand out and have gained attention and credibility, as demonstrated by the vast number of certified projects around the world and the widely-known usefulness and advantages of their application. The Wa-Pa-Su project sustainability rating system presents an integrated approach to sustainability assessment by integrating three distinctive areas of knowledge: (1) sustainable development theory and fundamentals supports the ultimate goal of the rating system, which is to contribute to sustainability, with the aim of finding a path to balance social, economic, and environmental needs; (2) continual performance improvement becomes essential due to the duration of the projects, as it is critical to allow organizations or projects to improve performance over time; and (3) multi-criteria decision analysis assists with the assessment process through stakeholder engagement and participation, and the design and implementation of a criteria weighting system.     

Substance flow analysis for an urban drainage system of a representative hypothetical city in China

This paper discusses the use of substance flow analysis (SFA) as a tool to support quantified research on urban drainage systems. Based on the principle of mass balance, a static substance flow model is established to describe and examine the routes and intensities of water, chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) for a representative hypothetical city (RH city) in China, which is a devised and scaled city using statistical characteristics of urban circumstances at the national level. It is estimated that the annual flux of water, COD, TN and TP through the urban drainage system in 2010 was 55.1 million m³, 16037.3 t, 1649.5 t and 209.7 t, respectively. The effluent of wastewater treatment plant (WWTP) was identified as the most important pathway for pollutant emissions, which contributed approximately 60% of COD, 65% of TN and 50% of TP to receiving water. During the wastewater treatment process, 1.0 million m3, 7042.5 t, 584.2 t and 161.4 t of the four studied substances had been transmitted into sludge, meanwhile 3813.0 t of COD and 394.0 t of TN were converted and emitted to the atmosphere. Compared with the representative hypothetical city of 2000, urban population and the area of urban built districts had expanded by approximately 90% and 80% respectively during the decade, resulting in a more than threefold increase in the input of substances into the urban drainage system. Thanks to the development of urban drainage systems, the total loads of the city were maintained at a similar level.     

Arsenic bioaccessibility in a gold mining area: a health risk assessment for children

High concentrations of total arsenic (As) have been measured in soils of gold mining areas of Brazil. However, bioaccessibility tests have not yet been conducted on those materials, which is essential for better health risk estimates. This study aimed at?evaluating As bioaccessibility in samples from a gold mining area located in Brazil and assessing children's exposure to As-contaminated materials. Samples were collected from different materials (a control and four As-contaminated soils/sediments) found in a gold mine area located in Paracatu (MG), Brazil. Total and bioaccessible As concentrations were determined for all samples. The control soil presented the lowest As concentrations, while all other materials contained high total As concentrations (up to 2,666?mg?kg(-1)) and low bioaccessible As percentage (<4.2%), indicating a low risk from exposure of resident children next to this area. The calculated dose of exposure indicated that, except for the pond tailings, in all other areas, the exposure route considering soil ingestion contributed at most to 9.7% of the maximum As allowed ingestion per day (0.3?μg?kg(-1) BW day(-1)).     

Platinum pollution in road dusts,roadside soils,and tree barks in Seoul,Korea

This study presents the level of platinum in urban environment in and around Seoul, the capital city of Korea. Road dust, roadside soil, and tree bark samples were collected from the sites of various traffic volumes and from control sites in the suburbs. The above samples were analyzed for Pt by ICP-MS and other heavy metals by ICP-OES. Platinum levels in road dusts and roadside soils from Seoul were in the range of 3.8–444 ng/g (av. 115.0 ng/g) and 0.7–221 ng/g (av. 49.7 ng/g), respectively, whereas those in the suburbs were in the range of 2.3–5.2 ng/g (av. 3.9 ng/g) in road dusts and 0.4–5.1 ng/g (av. 2.4 ng/g) in roadside soils. The highest Pt levels in road dusts were found from major roads with high traffic volume. The remarkable difference in average Pt level between heavy traffic roads (av. 132.2 ng/g) and light traffic roads (av. 22.8 ng/g) reflects that an important source of Pt in roadside environment is automobile catalytic converter. High Pt level in road dust was found from the site of erratic stop–start driving condition, for example, 178 ng/g Pt in road dust around a vehicle crossing gate. Platinum level in tree barks ranged from 0.9 to 4.5 ng/g, which indicates the existence of Pt-containing particulate matter in the atmosphere. Road dusts with high Pt level were enriched in traffic-related heavy metals.     

Influence of fuel load and weather on timing of nocturnal spring migratory departures in European robins, <Emphasis Type="Italic">Erithacus rubecula</Emphasis>

Time of departure and landing of nocturnal migrants are of great importance for understanding migratory strategy used by birds. It allows us to estimate flying time and hence the distance that migrants cover during a single night. In this paper, I studied the temporal schedule of nocturnal departures of European robins during spring migration. The study was done on the Courish Spit on the Baltic Sea in 1998–2003 by retrapping 51 ringed birds in high mist nets during nocturnal migratory departure. Take-offs of individual birds occurred between the first and tenth hour after sunset (median 176 min after sunset). Departure time was not related to fuel stores at arrival and departure, stopover duration and progress of the season. The results suggest that one reason for temporal variation in take-off time was differential response of European robins with high and low motivation to depart to such triggers as air pressure and its trend. If these parameters reach a certain minimum threshold shortly before sunset, robins with a high migratory motivation take off in the beginning of the night. When air pressure or its trend reaches a maximum, it may trigger to take off later during the night birds with lower initial motivation for departure, including those that have low refuelling efficiency. In regulation of timing of take-offs of robins, an important role is also played by their individual endogenous circadian rhythm of activity which is related to the environment in a complex way.     

Safe betting: males help dull females only when they raise high-quality offspring

In evolutionary biology, whether parents should enhance or reduce parental care according to mate ornamentation is a subject of great debate. However, the evolution of female ornaments can shed light on this question. In theory, female ornamentation should be traded off against fecundity and thus cannot be wholly informative to males without a direct indication of fecundity. Hence, direct cues of offspring quality should affect the relationship between male investment and female ornamentation. Under this hypothesis, we manipulated two direct cues of offspring quality (egg size and color) after first egg laying in the blue-footed booby and registered male incubation patterns. In this species, foot color is a dynamic signal of current condition and in females is traded off with egg size. We found that males spent more time incubating when paired with dull females but only in nests with large eggs. Males also spent less time incubating small dull eggs. Results indicate that egg size, a direct cue of reproductive value, affected the relationship between male effort and female ornamentation. Males may be willing to help females that have invested in offspring at the expense of ornamentation, which suggests compensation when females are in low condition. Another possibility is that males relax their effort when paired with highly ornamented and fecund females because they have high parenting abilities. Our findings suggest that the information conveyed by female ornaments may depend on direct cues of fecundity. Results also highlight that parental decisions are complex, modulated by a combination of information sources.