Development of some natural matrix standards — Progress report

Substantial progress has been made in the production of environmental level, natural matrix, radioactivity standards of soil of low organic and low carbonate content, and of human lung and human liver. This is in response to the deliberations of the 1977 ICRM meeting at which the need for such standards was voiced and the criteria suggested. The soil samples have been reduced to optimum particle size and are ready for blending and standardization. A ten year supply of this standard should be ready in a year or less. Reducing the dried lung and liver to less than 74 μm has proven formidable because of the natural fat and oil content. Using cyrogenic milling techniques more than three quarters of the total mass of each has been reduced to the desired particle size; the balance will either be reduced or removed and we can then proceed to the final standardization.     

Co-pyrolysis of swine manure with agricultural plastic waste: Laboratory-scale study

Manure-derived biochar is the solid product resulting from pyrolysis of animal manures. It has considerable potential both to improve soil quality with high levels of nutrients and to reduce contaminants in water and soil. However, the combustible gas produced from manure pyrolysis generally does not provide enough energy to sustain the pyrolysis process. Supplementing this process may be achieved with spent agricultural plastic films; these feedstocks have large amounts of available energy. Plastic films are often used in soil fumigation. They are usually disposed in landfills, which is wasteful, expensive, and environmentally unsustainable. The objective of this work was to investigate both the energetics of co-pyrolyzing swine solids with spent plastic mulch films (SPM) and the characteristics of its gas, liquid, and solid byproducts. The heating value of the product gas from co-pyrolysis was found to be much higher than that of natural gas; furthermore, the gas had no detectable toxic fumigants. Energetically, sustaining pyrolysis of the swine solids through the energy of the product gas could be achieved by co-pyrolyzing dewatered swine solids (25% m/m) with just 10% SPM. If more than 10% SPM is used, the co-pyrolysis would generate surplus energy which could be used for power generation. Biochars produced from co-pyrolyzing SPM and swine solid were similar to swine solid alone based on the surface area and the ¹H NMR spectra. The results of this study demonstrated the potential of using pyrolysis technology to manage two prominent agricultural waste streams (SPM and swine solids) while producing value-added biochar and a power source that could be used for local farm operations.     

Policy implementation of the Republic Act (RA) No. 9003 in the Philippines: A case study of Cebu city

Municipal Solid Waste Management (MSWM) is considered to be one of the most serious environmental issues in the Philippines. The annual waste generation was estimated at 10.6 million tonnes in 2012 and this is expected to double in 2025. The Republic Act (RA) No. 9003, widely known as the Ecological Solid Waste Management Act of 2000, provides the required policy framework, institutional mechanisms and mandate to the Local Government Units (LGUs) to achieve 25% waste reduction target through establishing an integrated solid waste management plan based on the 3Rs (reduce, reuse and recycling). Although the initial impact of the LGUs is still very limited in implementing the national mandate, this article highlights the successful experiences of Cebu, the second largest city in the Philippines, in reducing its MSW generation by more than 30% in the past three years. This study also explores the implementation process, innovative actions taken by the Cebu City Government in implementing the national mandate at local level and identifies the factors that influence the policy implementation. The findings suggest that the impacts of the national mandate can be achieved if the LGUs have the high degree of political commitment, planning and development of effective local strategies in a collaborative manner to meet with local conditions, partnership building with other stakeholders, capacity development, adequate financing and incentives, and in the close monitoring and evaluation of performance.     

The Chartherm process,what’s in the name?

Earlier research has identified the Chartherm process (Thermya, France) as a candidate for the best available technology to treat chromated copper arsenate (CCA) impregnated wood waste. This paper presents the working principle, the characteristics and the current state-of-knowledge related to the process, illustrating clearly the differences with pyrolysis and carbonisation processes. To emphasise the specific nature of the process, it has been given its own name ‘chartherisation’. The avoidance of tar and dioxin release, the role of the solid matrix in the metal behaviour and the separation process are described. Furthermore, the possible benefits of working at elevated pressure are discussed, based on the experience with charcoal production from coal and biomass. This paper shows that more fundamental research is needed to understand and model all mechanisms contributing to the characteristic nature of chartherisation, in order to control the dynamic behaviour and tune the operating conditions in the reactor on the quality of the products requested.     

Prediction of household and commercial BMW generation according to socio-economic and other factors for the Dublin region

Both planning and design of integrated municipal solid waste management systems require accurate prediction of waste generation. This research predicted the quantity and distribution of biodegradable municipal waste (BMW) generation within a diverse ‘landscape’ of residential areas, as well as from a variety of commercial establishments (restaurants, hotels, hospitals, etc.) in the Dublin (Ireland) region. Socio-economic variables, housing types, and the sizes and main activities of commercial establishments were hypothesized as the key determinants contributing to the spatial variability of BMW generation. A geographical information system (GIS) ‘model’ of BMW generation was created using ArcMap, a component of ArcGIS 9. Statistical data including socio-economic status and household size were mapped on an electoral district basis. Historical research and data from scientific literature were used to assign BMW generation rates to residential and commercial establishments. These predictions were combined to give overall BMW estimates for the region, which can aid waste planning and policy decisions. This technique will also aid the design of future waste management strategies, leading to policy and practice alterations as a function of demographic changes and development. The household prediction technique gave a more accurate overall estimate of household waste generation than did the social class technique. Both techniques produced estimates that differed from the reported local authority data; however, given that local authority reported figures for the region are below the national average, with some of the waste generated from apartment complexes being reported as commercial waste, predictions arising from this research are believed to be closer to actual waste generation than a comparison to reported data would suggest. By changing the input data, this estimation tool can be adapted for use in other locations. Although focusing on waste in the Dublin region, this method of waste prediction can have significant potential benefits if a universal method can be found to apply it effectively.     

Some unusual case histories from personal experience

Is protection of equipment the only consideration when setting the relieving pressures of safety relief valves? I will show you a case where other factors should have been considered and suggest that you might give your safety valve set pressures a second thought.Do you have side-by-side pieces of identical equipment? If so, you must consider that operating or maintenance personnel may become confused, and the results maybe catastrophic. A PVC reactor incident will demonstrate this point.Does your process contain materials that could decompose? After thirty years of safe operation in butadiene units, there was a vinyl acetylene decomposition. Could it happen to you?It is my hope that these three unique and unusual cases will provide valuable information for operations and maintenance personnel, managers, safety professionals, and engineers.     

What Can Funders Do to Better Link Science with Decisions? Case Studies of Coastal Communities and Climate Change

Many reports and studies have noted that a significant portion of problem-oriented coastal science does not actually link to decisions. Here, three competitively funded project case studies are studied to determine what funders can and should do to better link science with decisions. The qualitative analysis used for this study indicates that the studied program was seen as being unusually attentive to the issue of linking science to decisions, as opposed to simply generating new knowledge. Nevertheless, much of the data indicate that funders can and should do more. Three ideas figured most prominently in the qualitative data: (1) funders should do more to ensure that the problem itself is defined more thoroughly with people who are envisioned as potential users of the science; (2) funders need to allocate more resources and attention to communicating effectively (with users) throughout the project; and (3) funders need to demand more engagement of users throughout the project. These findings have important implications for how funders review and support science, especially when competitive processes are used. Most importantly, funders should adjust what kind of science they ask for. Secondly, funders need to change who is involved in the review process. Currently, review processes focus on knowledge generation, which means that the reviewers themselves have expertise in that area. Instead, review panels should be balanced between those who focus on knowledge generation and those who focus on linking knowledge to decisions; this is a separate but critical discipline currently left out of the review process.