Utilization of Arachis hypogaea hull,an agricultural waste for the production of activated carbons to remove phenol from aqueous solutions

Arachis hypogaea hulls, an agricultural waste, were used to prepare activated carbon by chemical activation with zinc chloride under four different activation atmospheres. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. The maximum Brunquer-Emmett-Teller (BET) surface area and micropore volume of the activated carbon was found to be 418 m²/g and 0.28 cm³/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from aqueous solutions. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second-order, and Lagergren, and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. Solution pH has significant effect on adsorption and the maximum uptake of phenol was reported at pH 3.5.     

Morphology of single inhalable particle inside public transit biodiesel fueled bus

In an urban-transit bus,fueled by biodiesel in Toledo,Ohio,single inhalable particle samples in October 2008 were collected and detected by scanning electron microscopy and energy dispersive X-ray spectrometry(SEM/EDS).Particle size analysis found bimodal distribution at 0.2 and 0.5 μm.The particle morphology was characterized by 14 different shape clusters:square,pentagon,hexagon,heptagon,octagon,nonagon,decagon,agglomerate,sphere,triangle,oblong,strip,line or stick,and unknown,by quantitative order.The square particles were common in the samples.Round and triangle particles are more,and pentagon,hexagon,heptagon,octagon,nonagon,decagon,strip,line or sticks are less.Agglomerate particles were found in abundance.The surface of most particles was coarse with a fractal edge that can provide a suitable chemical reaction bed in the polluted atmospheric environment.The three sorts of surface patterns of squares were smooth,semi-smooth,and coarse.The three sorts of square surface patterns represented the morphological characteristics of single inhalable particles in the air inside the bus in Toledo.The size and shape distribution results were compared to those obtained for a bus using ultra low sulfur diesel.     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

Stakeholders' views towards flood risk management in the Paz River catchment area of Guatemala and El Salvador

The river Paz is a transboundary river that flows through Guatemala and El Salvador. Its frequent floods endanger the lives and livelihoods of downstream communities. Attempts have previously been made to develop flood management programmes for this watershed. However, these approaches were generally made by high-level governmental institutions with few if any contributions from floodplain communities and other stakeholders. Recognising that public consultation is a key aspect in flood management programmes, we intend in this work to extract different stakeholders' views regarding current and future flooding and flood management programmes in the Paz River basin. This is achieved using Future Scenarios Workshops with a projected time horizon of 30 years. The exercise was expected to identify consensual short- and medium–long-term flood management strategies for the Paz River basin that draws on input from inhabitants of flood-prone areas and other stakeholders.     

Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under Natural Soil Burial,UV Radiation and Hydrolytic-Salt Water Circumstances

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance (¹HNMR) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹HNMR spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.     

Comparative performance study of different configurations of organic Rankine cycle using low-grade waste heat for power generation

This paper aims at analyzing the feasibility of a waste heat recovery power generation plant based on parametric optimization and performance analysis using different organic Rankine cycle configurations and heat source temperature conditions with working fluid R-12, R-123, R-134a, and R-717. A parametric optimization of turbine inlet temperature(TIT) was performed to obtain the irreversibility rate, system efficiency, availability ratio, turbine work output, system mass flow rate, second-law efficiency, and turbine outlet quality, along the saturated vapor line and also on superheating at an inlet pressure of 2.50 MP in basic as well as regenerative organic Rankine cycle. The calculated results reveal that selection of a basic organic Rankine cycle using R-123 as working fluid gives the maximum system efficiency, turbine work output, second-law efficiency, availability ratio with minimum system irreversibility rate and system mass flow rate up to a TIT of 150°C and appears to be a choice system for generation of power by utilizing the flue gas waste heat of thermal power plants and above 150°C the regenerative superheat organic Rankine cycle configuration using R 123 as working fluid gives the same results.     

Bio-concentration of chromium—an <Emphasis Type="Italic">in situ</Emphasis> phytoremediation study at South Kaliapani chromite mining area of Orissa,India

Mine waste water at South Kaliapani usually contains toxic levels of hexavalent Cr(VI). The present in situ study was conducted at South Kaliapani chromite mine area in Orissa state, India, to assess the phytoremediation ability of three plants, namely, rice (Oryza sativa L.), paragrass (Brachiaria mutica), and an aquatic weed (Eichhornia crassipes), in attenuating Cr(VI) from mine waste water and to correlate the bio-concentration factors (BCF) of Cr. Water hyacinth (E. crassipes) showed 24% to 54% reduction whereas paragrass (B. mutica) was able to reduce 18% to 33% of Cr(VI) from mine water. This reduction was studied over a period of 100 days of plant growth. The reduction was observed through a passage of a sum total of 2,000 sq. ft. cultivated plots and ponds separately. Reduction in Cr(VI) content in mine water varies with plant age as well as with the distance of passage. Cr accumulation and BCF values increased with high soil Cr levels as well as the age of plants. High BCF and transportation index (Ti) values, i.e., 10,924 and 32.09, respectively, were noted for water hyacinth. The Ti values indicated that the root-to-shoot translocation of Cr was very high after 100 days of growth. The total accumulation rate was maximum (8.29 mg Cr kg dry biomass^− 1 day ^− 1) in paragrass. The BCF values for roots were noted to be higher than those of leaves, stems, and grains of the 125-day-old plants. Hence, paragrass and water hyacinth may be used as tools of phytoremediation to combat the problem of in situ Cr contamination.     

Abundance pattern of wedge clam Donax cuneatus (L.) in different spatial scale in the vicinity of a coastal nuclear power plant

Impact of thermal discharge from a coastal power station (Madras Atomic Power Station, southeast coast of India) on the spatial variability of Donax cuneatus abundance was assessed to determine the impact boundary. Totally, 20 sites were selected both on south and north side in increasing spatial scale from mixing zone, 12 locations were selected toward south side at a distance from 0 (near mixing point) to 2,000 m and eight location were selected toward north from the effluent mixing zone. Mean water temperature along the coast ranged from 29.1 ±0.15°C to 31.2 ± 0.15°C. Total organic carbon content in the sediment ranged from 0.27% to 0.70%. D. cuneatus population on the swash zone was ranged between 1.3 ± 1.5 and 88.3 ± 9.6 m^???2. Meager population of wedge clam was observed up to 100 m (S100) south from mixing point and abundance gradually increased in different spatial scale. Comparatively high abundance was observed from S400 and reached maximum at S1000 (64.0 ± 3.6 m^???2). Similar pattern was observed on north side too but less abundance was observed only up to 80 m (N80). Maximum abundance was observed at control location C3-N500 (88.3 ± 9.6 m^???2). Forty meters on either side of discharge point was highly impacted, 80 to 100 m toward plume flow (south) was moderately impacted, and 80 m north of mixing point also witnessed moderate impact. After 100 m (N100), north was not affected by effluents, whereas between 100 and 400 m, south was influenced slightly. Multivariate clustering pattern on the environmental variables of all sampling locations and population trend of D. cuneatus at those stations showed similarity. Present investigation unambiguously showed that the abundance pattern of D. cuneatus on the sandy beach of east coast of Kalpakkam is not governed by single major factor but due to the result of multiple interacting factors. The population size of the wedge clam with reference to the effect of power plant effluents and other features of habitats of the beach ecosystem are also discussed.