Modified CDKN2B (p15) and CDKN2A (p16) DNA methylation profiles in urban pesticide applicators

Environmental Science and Pollution Research - Gene-specific changes in DNA methylation by pesticides in occupationally exposed populations have not been studied extensively. Of particular concern...     

Remediation of a biodiesel blend-contaminated soil by using a modified Fenton process

A soil contaminated with a B20 biodiesel blend (20 % biodiesel, 80 % diesel) has been treated by modified Fenton process with or without chelant addition. All experiments were conducted without pH adjustment. The reagents used were as follows: hydrogen peroxide as oxidant (400–4,000 mmol L^?1), ferric ion as catalyst (5–20 mmol L^?1), and trisodium citrate (50 mmol L^?1) as chelating agent. Soil was spiked at two different pollutant concentrations (1,000–10,000 mg diesel kg^?1 soil). Higher total petroleum hydrocarbon (TPH) removal efficiencies were obtained (up to 75 %) after the treatment in the absence of the chelant due to the low pH obtained in this case. In the presence of chelant, the TPH conversion obtained was lower because both higher pH is obtained and chelant competes with diesel for the oxidant. On the other hand, at neutral pH, the lifetime of the oxidant was increased. Fatty acid methyl esters (FAMEs) are easier to remove than diesel aliphatic hydrocarbons from the blend. An important decrease of the aqueous phase toxicity was observed after the modified Fenton reaction, supporting that nontoxic by-products were released to the aqueous phase during the treatment.     

Uphill permeation of Cr(VI) using Hostarex A327 as ionophore by membrane-solvent extraction processing

The transport of chromium by the emulsion pertraction technology (EPERT) using Hostarex A327 (tertiary amine) as a carrier has been investigated. The permeation of the metal is studied as a function of various experimental variables: hydrodynamic conditions, concentration of Cr(VI) and HCl in the source phase, carrier concentration and diluent in the organic phase, strippant concentration in the stripping phase and support characteristics of the membrane. The mass transfer coefficient and the thickness of the aqueous source boundary layer were estimated from the experimental data. Furthermore, the selectivity of the Hostarex A327-bases EPERT towards different metal ions and the behaviour of the system against other carriers are presented.     

Thermally assisted mechanical dewatering (TAMD) of suspensions of fine particles: analysis of the influence of the operating conditions using the response surface methodology

Thermally assisted mechanical dewatering (TAMD) is a new process for energy-efficient liquid/solids separation which enhances conventional-device efficiency. The main idea of this process is to supply a flow of heat in mechanical dewatering processes to favour the reduction of the liquid content. This is not a new idea but the proposed combination, especially the chosen operating conditions (temperature <100 degrees C and pressure <3000 kPa) constitutes an original approach and a significant energy saving since the liquid is kept in liquid state. Response surface methodology was used to evaluate the effects of the processing parameters of TAMD on the final dry solids content, which is a fundamental dewatering parameter and an excellent indicator of the extent of TAMD. In this study, a two-factor central composite rotatable design was used to establish the optimum conditions for the TAMD of suspensions of fine particles. Significant regression models, describing changes on final dry solids content with respect to independent variables, were established with regression coefficients (usually called determination coefficients), R(2), greater than 80%. Experiments were carried out on a laboratory filtration/compression cell, firstly on different compressible materials: synthetic mineral suspensions such as talc and synthetic organic suspensions such as cellulose, and then on industrial materials, such as bentonite sludge provided by Soletanche Bachy Company. Experiment showed that the extent of TAMD for a given material is particularly dependent on their physical and chemical properties but also on processing parameters.     

Modified SBA-15 mesoporous silica for heavy metal ions remediation

N-Propylsalicylaldimino-functionalized SBA-15 mesoporous silica was prepared, characterized and used as an adsorbent for heavy metal ions. The organic-inorganic hybrid material was obtained using successive grafting procedures of SBA-15 silica with 3-aminopropyl-triethoxysilane and salicylaldehyde, respectively. For comparison an amorphous silica gel was functionalized using the same procedure. The structure and physicochemical properties of the materials were characterized by means of elemental analysis, X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis and FTIR spectroscopy. The organic functional groups were successfully grafted on the SBA-15 surfaces and the ordering of the support was not affected by the chemical modification. The behavior of the grafted solids for the adsorption of heavy metals ions from aqueous solutions was investigated. The hybrid materials showed high adsorption capacity and high selectivity for copper ions. Other ions, such as nickel, zinc, and cobalt were adsorbed by the modified SBA-15 material. The adsorbent can be regenerated by acid treatment without altering its properties.     

Arsenic in the soils of Zimapán, Mexico

Arsenic concentrations of 73 soil samples collected in the semi-arid Zimapán Valley range from 4 to 14 700 mg As kg(-1). Soil arsenic concentrations decrease with distance from mines and tailings and slag heaps and exceed 400 mg kg(-1) only within 500 m of these arsenic sources. Soil arsenic concentrations correlate positively with Cu, Pb, and Zn concentrations, suggesting a strong association with ore minerals known to exist in the region. Some As was associated with Fe and Mn oxyhydroxides, this association is less for contaminated than for uncontaminated samples. Very little As was found in the mobile water-soluble or exchangeable fractions. The soils are not arsenic contaminated at depths greater than 100 cm below the surface. Although much of the arsenic in the soils is associated with relatively immobile solid phases, this represents a long-term source of arsenic to the environment.     

Increase in membrane thickness during development compensates for eggshell thinning due to calcium uptake by the embryo in falcons

We compared membrane thickness of fully developed eggs with those of non-developed eggs in different endangered falcon taxa. To our knowledge, membrane thickness variation during development has never been examined before in falcons or any other wild bird. Yet, the egg membrane constitutes an important protective barrier for the developing embryo. Because eggshell thinning is a general process that occurs during bird development, caused by calcium uptake by the embryo, eggs are expected to be less protected and vulnerable to breakage near the end of development. Thus, egg membranes could play an important protective role in the later stages of development by getting relatively thicker. We used linear mixed models to explore the variation in membrane thickness (n = 378 eggs) in relation to developmental stage, taxon, female age, mass and identity (73 females), egg-laying sequence (105 clutches) and the study zone. Our results are consistent with the prediction that egg membranes are thicker in fully developed eggs than in non-developed eggs, suggesting that the increase in membrane thickness during development may compensate for eggshell thinning. In addition, our data shown that thicker membranes are associated with larger, heavier and relatively wider eggs, as well as with eggs that had thinner eggshells. Egg-laying sequence, female age and the study zone did not explain the observed variation of membrane thickness in the falcon taxa studied. As we provide quantitative data on membrane thickness variation during development in falcons not subjected to contamination or food limitation (i.e. bred under captive conditions), our data may be used as a reference for studies on eggs from natural populations. Considering the large variation in membrane thickness and the multiple factors affecting on it and its importance in the protection of the embryo, we encourage other researchers to include measurements on membranes in studies exploring eggshell thickness variation.