含油污泥微乳化处理工艺研究

利用微乳化法对含油污泥进行资源化处理。通过对现场采得的SLGD含油污泥样品处理,得到该油泥的最佳微乳液组成为:SDS 0.16 g/mL,OTAC 0.04 g/mL,正丁醇0.47 g/mL,NaCl 0.034 g/mL,脱油率最高可达42.53%。最佳单次处理量为12 g(以10 mL水为基准);处理温度为30℃,最佳处理时间为30 min;在保证脱油率的前提下,微乳液可重复使用3次。     

物元分析模型在生活垃圾分类收集方案评价中的应用

家庭生活垃圾分类收集是实现城市生活垃圾无害化、减量化和资源化的重要方面,而生活垃圾分类收集方案评价也是实现生活垃圾综合管理的有效方法。以昆明市居民区生活垃圾分类收集为例,设计5种垃圾分类收集方案,基于问卷调查和层次分析,并建立物元分析模型,得出最优分类方案是将生活垃圾分为厨余垃圾与其他垃圾2大类。     

滇池水葫芦规模化控养生态环境效应分析

水葫芦规模化控养是"十二五"期间滇池治理的重要措施之一。首先介绍了滇池水葫芦规模化控养现状,比较了滇池草海和外海在水葫芦控养前后水质的变化情况,指出滇池水葫芦规模化控养对草海水体生态恢复效果显著,可以在滇池选择适宜水葫芦生长的水域继续扩大水葫芦控养面积,使水葫芦在滇池生态治理中发挥更大的作用。     

三槽氧化沟内底推位置与积泥厚度的分析研究

氧化沟工艺由于进水中含有大量的无机颗粒,无机颗粒的沉淀导致沟内积泥较厚。为了不影响正常生产,依据经验数据,依次对1号、2号氧化沟安装底推。对沟内积泥情况及影响因素进行分析比较,得出氧化沟的积泥主要由进水中密度较大的无机颗粒造成,且积泥规律与底推安装位置和运行情况相关。     

闽南城市区域空气中挥发性有机物的污染特征

采用美国EPA TO-15的方法,研究了2011年3月份闽南城市区域空气中VOCs的含量及其污染特征。结果表明:1)漳州工业区空气的VOCs浓度为200.5μg/m3,污染较为严重;厦门交通干道VOCs浓度为74.0μg/m3,泉州商住区的VOCs浓度77.1μg/m3,污染较轻。2)漳州工业区采样点TOP5占TVOCs的比例最高,达77.3%;厦门交通干道与泉州商住区两采样点的TOP5占TVOCs的比例相近,分别为64.1%和62.0%。在所有的采样点中出现的TOP5组分比较集中,主要包括甲苯、苯、二氯甲烷、异丙醇、乙酸乙酯、1,1-二氯乙烯、萘等。3)机动车尾气的排放、工业溶剂的挥发和废气排放可能是厦漳泉三地大气VOCs的主要排放源。4)厦漳泉的BTEX主要来源于汽车尾气和汽油挥发;其中厦门和泉州BTEX浓度相比较处在较低污染水平,漳州处在中等水平。     

地质雷达在监测地下水石油烃污染中的应用

随着我国工业迅速发展,石油烃污染威胁地下水安全问题逐渐暴露出来。地质雷达作为一种非破坏性的原位探测技术在国外已广泛应用于地下水监测,由于石油烃在地质雷达图谱上通常显示出高阻异常特征,这为探测地下水中的石油烃污染提供了可能。简述了地质雷达探测石油烃的原理,探测效果的影响因素,并列举了部分国外实例,证实了地质雷达探测地下水石油烃污染的可行性。     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Entrepreneur environment management behavior evaluation method derived from environmental economy

Evaluation system can encourage and guide entrepreneurs, and impel them to perform well in environment management. An evaluation method based on advantage structure is established. It is used to analyze entrepreneur environment management behavior in China. Entrepreneur environment management behavior evaluation index system is constructed based on empirical research. Evaluation method of entrepreneurs is put forward, from the point of objective programming-theory to alert entrepreneurs concerned to think much of it, which means to take minimized objective function as comprehensive evaluation result and identify disadvantage structure pattern. Application research shows that overall behavior of Chinese entrepreneurs environmental management are good, specially, environment strategic behavior are best, environmental management behavior are second, cultural behavior ranks last. Application results show the efficiency and feasibility of this method.