A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Prompting safety-belt use in the context of a belt-use law: the flash-for life revisited

PROBLEM: Safety-belt use reduces motor vehicle crash-related morbidity and mortality, yet an estimated 18% of drivers do not consistently buckle up (NHTSA, 2005). In 1985, Geller and colleagues developed an interpersonal Flash-for-Life prompt that increased belt use among 22% of 1,087 unbuckled drivers (Geller, Bruff, & Nimmer, 1985). METHOD: The Flash-for-Life intervention was re-introduced at a large university with high safety-belt use (i.e., 80%). College students stood at parking-lot entrance/exits and "flashed" signs with the message, "Please Buckle Up, I Care" to unbuckled drivers. RESULTS: Of 427 unbuckled drivers observed, 30% of these complied with the prompt. Male drivers were significantly more likely to comply with prompts delivered by females. DISCUSSION: Compliance was higher than in the 1985 study, indicating a high baseline rate of safety-belt use does not negate potential beneficial influence of a prompting intervention. This intervention is particularly effective with college-aged males, a sub-group of the driving population least likely to buckle-up. IMPACT ON INDUSTRY: A simple behavioral prompt could be used at most industrial complexes to increase safety-belt use among vehicle occupants who are not buckled-up.     

Biological treatment of wastewater in aeration tanks: Theoretical bases for process calculations

This article describes the method, based on the kinetics of enzyme reaction, for calculating treatment rates for wastewater effluents of varied concentrations in mixing aeration tanks and continuous flow aeration tanks. Using this method would make it possible to optimize the parameters of the biological treatment of wastewater. In addition, the authors illustrate that partitioning of the aeration space of the mixing aeration tank in a separate KU‐200 compact installation, which is intended for wastewater treatment from small sources, would make it possible to increase its efficiency by a factor of 1.8.     

Detention Outlet Retrofit Improves the Functionality of Existing Detention Basins by Reducing Erosive Flows in Receiving Channels

By discharging excess stormwater at rates that more frequently exceed the critical flow for stream erosion, conventional detention basins often contribute to increased channel instability in urban and suburban systems that can be detrimental to aquatic habitat and water quality, as well as adjacent property and infrastructure. However, these ubiquitous assets, valued at approximately $600,000 per km² in a representative suburban watershed, are ideal candidates to aid in reversing such cycles of channel degradation because improving their functionality would not necessarily require property acquisition or heavy construction. The objective of this research was to develop a simple, cost‐effective device that could be installed in detention basin outlets to reduce the erosive power of the relatively frequent storm events (~ < two‐year recurrence) and provide a passive bypass to maintain flood control performance during infrequent storms (such as the 100‐year recurrence). Results from a pilot installation show that the Detain H₂O device reduced the cumulative sediment transport capacity of the preretrofit condition by greater than 40%, and contributed to reduced flashiness and prolonged baseflows in receiving streams. When scaling the strategy across a watershed, these results suggest that potential gains in water quality and stream channel stability could be achieved at costs that are orders of magnitude less than comparable benefits from newly constructed stormwater control measures.     

Molecular and cytogenetic characterization of extra-structurally abnormal chromosomes (ESACs) found prenatally: outcome and follow-up

A 40-year-old woman underwent amniocentesis at 15.3 weeks of gestation. Chromosome analysis performed using QFQ, DA-DAPI and CBG banding revealed two de novo extra-chromosomal markers (ESACs) in 11 of the 16 colonies analysed. Fluorescence in situ hybridization (FISH) showed that both chromosomes came from the Yq11.22.1 region of the Y chromosome. PCR analysis of genes and STS localized on the Y chromosome excluded the Yp presence specifically of the SRY gene, and most of the euchromatic region of Yq. After extensive genetic counselling and considering both laboratory and second-level ultrasound data, the couple decided to continue the pregnancy. At 37.4 weeks of gestational age, a girl weighing 2750 g was born with an Apgar score of 9/10. A blood sample taken from the umbilical cord showed three cellular lines:mos47,XX, +mar1 ish.der (Y)(wcpY+) [21%]/48,XX, +mar1 ish.der (Y)(wcpY+), +mar2 ish.der (Y)(wcpY+) [41%]/46,XX [38%]. One year after birth, the baby was developing normally and had normal psychomotorial activity. Copyright © 2003 John Wiley & Sons, Ltd.     

丁酰胆碱脂酶电势型生物传感器测定敌敌畏农药残留的抑制性研究

敌敌畏农药是一种广泛使用的中等毒性的有机磷农药,采用传统方法测定难以满足现场测定的需要。试验以戊二醛为交联剂制备了一种基于丁酰胆碱脂酶的ISFET(离子敏场效应管)生物传感器,并将其应用于敌敌畏的测定,考察了不同pH值、底物浓度、抑制时间等对传感器响应(电压)值的影响,得到了最佳测定条件。     

Profitability of intensification technologies among smallholder maize farmers in the forest-savanna transition zone of Nigeria

Sustaining the productive capacity of the land resource under the existing land-use system and increasing population pressure requires the use of appropriate technologies that will enhance farm productivity and income levels.This paper examines the effect on farm profitability of smallholder maize farmers’ use of intensification technologies in tropical agriculture. The survey was conducted in southwest Nigeria. A multi-stage sampling technique was used to select 300 respondents from two major agroclimatic zones in Osun State. Primary data were collected using a structured questionnaire and complemented with focus group discussions (FGDs), while the State’s Ministry of Agriculture provided secondary data.Pressure on land was found high because farmland was continuously cropped for an average of 10 years with a mean fallow period of 2 years only. Technologies used to intensify agriculture included inorganic fertilizer, organic manure, alley cropping, and tree planting.Results from costs and returns analysis showed that average net returns to inorganic fertilizer use ranked highest in the two zones, while tree planting ranked lowest. There was a significant ecoregional difference on the average net returns/year earned by users of mineral fertilizer. While organic manure use earned higher net returns than alley cropping practice in the rain forest, the reverse was the case for the derived savanna. FGDs revealed that respondents’ preferred to use inorganic fertilizer despite its inadequate supply because, apart from enhancing higher returns and net gains, it also improved output level and provided an opportunity for the continuous use of the scarce land.These results imply that economic returns play a critical role in farmers’ use of intensification technologies and consequently affect their resource management decisions. Policy measures aimed at promoting research on appropriate technologies that are profitable on farmers’ fields will be more effective in enhancing farmers’ use of intensification technologies.